• Journal of the Korean Chemical Society
• /
• v.39 no.11
• /
• pp.884-886
• /
• 1995

• The Journal of Advanced Prosthodontics
• /
• v.8 no.5
• /
• pp.333-338
• /
• 2016

PURPOSE. The aim of this study was to compare the effects of different denture cleansers on the surface roughness and microhardness of various types of posterior denture teeth. MATERIALS AND METHODS. 168 artificial tooth specimens were divided into the following four subgroups (n=42): SR Orthotyp PE (polymethylmethacrylate); SR Orthosit PE (Isosit); SR Postaris DCL (double cross-linked); and SR Phonares II (nanohybrid composite). The specimens were further divided according to the type of the denture cleanser (Corega Tabs (sodium perborate), sodium hypochlorite (NaOCl), and distilled water (control) (n=14)) and immersed in the cleanser to simulate a 180-day immersion period, after which the surface roughness and microhardness were tested. The data were analyzed using the Kruskal-Wallis test, Conover's nonparametric multiple comparison test, and Spearman's rank correlation analysis (P<.05). RESULTS. A comparison among the denture cleanser groups showed that NaOCl caused significantly higher roughness values on SR Orthotyp PE specimens when compared with the other artificial teeth (P<.001). Furthermore, Corega Tabs resulted in higher microhardness values in SR Orthotyp PE specimens than distilled water and NaOCl (P<.005). The microhardness values decreased significantly from distilled water, NaOCl, to Corega Tabs for SR Orthosit PE specimens (P<.001). SR Postaris DLC specimens showed increased microhardness when immersed in distilled water or NaOCl when compared with immersion in Corega Tabs (P<.003). No correlation was found between surface roughness and microhardness (r=0.104, P=.178). CONCLUSION. NaOCl and Corega Tabs affected the surface roughness and microhardness of all artificial denture teeth except for the new generation nanohybrid composite teeth.

• Korean Journal of Medicinal Crop Science
• /
• v.14 no.6
• /
• pp.336-341
• /
• 2006

The endophytic bacteria were isolated from the rusty-root ginseng. This isolated bacteria were occurred the rusty-root ginseng with artificial inoculation. For the suppressing of rusty-ginseng, disinfectants, antibiotics, kitosan, micro-organisms and metabolites were tested to isolated endophytic bacterium. All of the isolated bacteria strains were sensitive sodium hypochlorite, however, some of isolated bacteria lines were sensitive to other tested materials. For example, D (didecyl dimethyl ammonium bromide), CIO$_2$, ODDA (octyldecyl dimethyl ammonium chloride + diocyul dimethyl ammonium chloride + alkyl diethyl benzyl ammonium chloride), GD (glutaraldehyde + dimethy cocobenzyl ammonium chloride) suppressed some of bacteria strains. Otherwise, some of antibiotics (e.g. ampicillin, chloramphenicol, erythromycin, kanamycin, neomycin, rifampin, streptomycin, tetracycline) were sensitive to the isolated bacteria strains. All of isolated bacteria strainswere inhibitive to the mixed formation with neomycin and streptomycin, and neomycin and tetracycline. Both sodium hypochlorite and antibiotic mixing of neomycin and tetracycline were effective to prevention of rusty-root ginseng of sub-merging ginseng in the ginseng field.

• Restorative Dentistry and Endodontics
• /
• v.16 no.2
• /
• pp.182-188
• /
• 1991

The purpose of this study was to clarify the effect of intracana1 medication on the clinical symptoms and the number of visits before canal filling in endodontic treatment The experimental teeth was divided into three groups. The teeth of group 1 was irrigated with saline solution and the teeth of group 2 was irrigated with sodium hypochlorite during biomechanical preparation. The intracanal medicament was not applied in the canals of group 1 and group 2. The teeth of group 3 was irrigated with sodium hypochlorite and hydrogen peroxide during canal enlargement and applied formocresol as intracanal medicament after drying the root canals with paper points. The incidence of interappintment pain and percussion pain after 1 st visit and the number of appointments before canal filling was examined, and the results was statistically compared. The following results were obtained. 1. The incidence of interappointment pain and percussion pain and the number of visits before canal filling was not effected by the types of irrigant and the use of the intracanal medicament 2. There was no significant difference in the incidence of interappintment pain arid percussion pain and the number of appointement before canal filling between vital teeth and non vital teeth, and also between single rooted teeth and multirooted teeth. 3. The use of formocresol as intracanal medicament was not able to aid the elimination of clinical symptoms and to decrease the number of appointment before canal filling.

• Asian Journal of Turfgrass Science
• /
• v.3 no.2
• /
• pp.89-94
• /
• 1989

Research was conducted to obtain t he optimum treatment Of sodium hypochlorite(NaOC I) at various temperatures in t he seed scarification for stimulating germination of zoysiagrass (Zocysia Japonica Steud ) seed. Morphological changes of seed coat were also examined by scanning electron micros cop(SEM). l. Differences in temperature of scarification with 2 .4% NaOCI showed little influence on promoting germination of seeds but seeds treated with 1% solution at l5˚C germinated less than that of higher temperatures. The promotion effect of 4% solution on germination was diminished when seeds were treated for 8 hours of more. The most favorable seed scarification unaffected hy temperature for enhancing germination was 4-6hours treatment at 4% solution in fresh seeds. 2. $GA_3$, treatment did not enhance germination of water-pretreated control seeds hut germination of seeds pretreated with NaOCI l was increased additional 10% or more hy$ GA_3$, Water pretreated control seeds treated with 50 mM hydrogen peroxide(H'O )germinated about 44%. In NaOCI treated seeds. $H_2$$O_2$ treatment increased germination additional l 0% or more. 3. NaOCI l and KOH treatment softened the seed coat and formed the pores hy removing the scab-like thikenings attached to the seed surface. These results suggest that the modes of action of NaOCl in the promotion of seed germination reside in it increase of the permeability of the seed coat, and in the provision of additional oxygen to the seed.

• Archives of Plastic Surgery
• /
• v.35 no.6
• /
• pp.748-750
• /
• 2008

Purpose: Chemical burn accounts for a small proportion of burns in burn patient population. However, chemical injuries own importance to their deep tissue destruction which continues long after the initial exposure. $YUHANROX^{(R)}$ is a domestic bleach which has been widely used in Korea. Chemical burn by the domestic bleach is an unusual case. Methods: A 70 yrs old female soiled with stool, her husband wiped the mess with $YUHANROX^{(R)}$. Skin edema, erythematous lesion was developed the second day, and she was admitted to our hospital via emergency department. Results: Complete epithelization was done after 3 times STSG but, severe scar was formed. Conclusion: We report this case to warn about the dangers of domestic bleaches chemical substances and to emphasize that they should be used with caution. Public relation of the primary care of the chemical burn injury is needed.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.5
• /
• pp.613-627
• /
• 2015

Simple methods of conductometric titration and infrared spectroscopy were used to quantify the surface carboxyl content of cellulose fibrils isolated by 2,2,6,6-tetramethylpiperidine-1-oxyl radical (TEMPO)-mediated oxidation. The effects of different cellulose sources, post or assisted-sonication oxidation treatment, and the amount of sodium hypochlorite addition on the carboxyl content of cellulose were reported. This study showed that post sonication treatment had no influence on the improvement of surface carboxyl charge of cellulose macrofibrils (CMFs). However, the carboxyl content increased for the isolated cellulose nanofibrils (CNFs). Thus the carboxyl content of CNFs is different from those of their corresponding bulk oxidized cellulose and CMFs. Filter paper as a CNF source imparted a higher surface charge than did hardwood bleached kraft pulp (HWBKP) and microcrystalline cellulose (MCC). It was considered that the crystallinity and microstructure of the initial cellulose affected oxidation efficiency. In addition, the carboxyl content of cellulose was successfully controlled by applying sonication treatment during the oxidation reaction and adjusting the amount of sodium hypochlorite.

• Textile Coloration and Finishing
• /
• v.11 no.4
• /
• pp.50-56
• /
• 1999

The adhesive properties of polyester cord in rubber matrix were investigated according to the surface modification. The polyester cord was oxidized in sodium hypochlorite solution, and graft-polymerized with acrylic acid under the irradiation with ultraviolet light, and then coated with resorcinol-formaldehyde latex (RFL). The modified surface was checked with scanning electron microscope. The adhesive properties were measured by the full-Out method, and evaluated with regard to the energy of adhesion and the maximum load. The polyester was not oxidized in sodium hypochlorite solution, so the surface was not able to etch to produce the coarse topology. As the concentration of acrylic acid and the reaction time were increased, the graft yields were also increased. It was considered that the acrylic acid would swell the polyester and diffuse easily to the inner side of substrate. The adhesive properties of polyeser to rubber matrix were affected by the surface condition. Namely, the maximum load was almost same, but the energy of adhesion was rather higher In the polyester grafted with acrylic acid than in control one. We concluded that the flexible aliphatic chains of polyacrylic acid situated in the interface of cord and rubber matrix were distributed well the stress and strain all over the filler resulting the high energy of adhesion.

• Restorative Dentistry and Endodontics
• /
• v.10 no.1
• /
• pp.55-62
• /
• 1984

This experimental study was made to evaluate the efficacy of root canal preparation of engine reamer versus hand reamer. Eighty extracted human teeth were prepared with the following treatments and devided into 4 groups; Group 1: Canal preparation with hand reamer, and irrigation with normal saline solution. Group 2: Canal preparation with engine reamer, and irrigation with normal saline solution. Group 3: Canal preparation with hand reamer, and irrigation with 3% hydrogen peroxide and 3.5% sodium hypochlorite solution. Group 4: Canal preparation with engine reamer, and irrigation with 3% hydrogen peroxide and irrigation with 3% hydrogen peroxide and 3.5% sodium hypochlorite solution. After decalcification, 5p. sections at levels 1-, 3-, and 5-mm from the apex were evaluated microscopically. The results were as follows; The effectiveness of hand reamer and engine reamer were equal in preparing the root canal at all levels from the apex, and were equal in normal saline solution groups, and 3% $H_2O_2$ and 3.5% NaOCl solution groups. Both in hand reaming groups and in engine reaming groups, some canal walls had still untouched portion, and canal irregularities and debris were still remained.

• Restorative Dentistry and Endodontics
• /
• v.40 no.2
• /
• pp.143-148
• /
• 2015

Objectives: This study evaluated the maximum depth and percentage of irrigant penetration into dentinal tubules by passive ultrasonic irrigation (PUI). Materials and Methods: Thirty extracted human teeth were instrumented and divided into three groups. According to final irrigation regimen, 5.25% sodium hypochlorite (Group A, NaOCl), 2% chlorhexidine (Group B, CHX) and saline solution (Group C, control group) were applied with Irrisafe 20 tips (Acteon) and PUI. Irrigant was mixed with 0.1% rhodamine B. Sections at 2 mm, 5 mm, and 8 mm from the apex were examined with confocal laser scanning microscopy (CLSM). The percentage and maximum depth of irrigant penetration were measured. Kruskal-Wallis test and Mann-Whitney test were performed for overall comparison between groups at each level and for pairwise comparison, respectively. Within a group, Wilcoxon test was performed among different levels. p values less than 0.05 were considered significant. Results: In all groups, highest penetration depth and percentage of penetration were observed at the 8 mm level. At 2 mm level, Groups A and B had significantly greater depths and percentages in penetration than Group C (p < 0.05), but there were no significant differences between Groups A and B. At 5 mm level, penetration depths and percentage of penetration was not significantly different among the groups. Conclusions: NaOCl and CHX applied by PUI showed similar depth and percentage of penetration at all evaluated levels.