• 한국염색가공학회지
• /
• 제8권3호
• /
• pp.31-35
• /
• 1996

Modal fabric was pretreated with sodium hydroxide, sodium persulfate, and their combined mixture by pad-steaming procedure. The tearing strength of the pretreated modal fabric was measured for subsequent microfibrillation. The solubility of modal fiber in sodium hydroxide solution was highest at 10 % concentration of sodium hydroxide. Extended steaming of the modal fabric padded with 6% sodium hydroxide solution did not reduce the tearing strength appreciably. 2% sodium persulfate pretreatment greatly reduced the tearing strength of modal fabric within 7 minutes of steaming time. The pretreatment with combined composition of sodium hydroxide and sodium persulfate brought about stable reduction in tearing strength within 1 minute of steaming time, which would be appricable to the continuous pretreatment of modal fabric for microfibrillation. Microfibrillation behavior of the pretreated modal fabric was tested also.

• 자원리싸이클링
• /
• 제32권3호
• /
• pp.38-44
• /
• 2023

국내산 흑연정광으로부터 불순물을 제거하기 위해 황산용액 및 수산화나트륨용액을 이용하여 침출실험을 진행하였다. 황산용액과 수산화나트륨용액을 각각 사용하여 침출실험을 진행한 결과, 수산화나트륨과 황산의 농도가 2 mol/L 이상에서 제거효과의 차이가 미미하고, 황산용액침출에서 온도가 증가함에 따라 고정탄소함량이 증가하는 것에 비해 수산화나트륨용액에서는 150℃ 이상에서 큰 차이가 나타나지 않았다. 수산화나트륨용액침출은 2 mol/L NaOH, 200℃, 1시간의 조건으로 선정하고, 황산용액침출은 2 mol/L H₂SO₄, 100℃, 1 시간의 조건으로 선정하여 5회까지 반복하여 침출을 진행하였다. 황산용액침출 후 수산화나트륨용액침출을 5회 반복했을 때 고정탄소는 99.95 %까지 증가하였고, 회분은 0.048 %까지 감소하였다. 수산화나트륨용액침출 후 황산용액침출을 5회 반복한 결과, 고정탄소는 99.98 %, 회분은 0.018까지 감소하여 수산화나트륨용액 침출 후 황산용액침출을 수행한 결과가 다소 높게 나타났다.

• 한국염색가공학회지
• /
• 제12권6호
• /
• pp.380-388
• /
• 2000

The porosity of polyester fibers treated with sodium hydroxide aqueous solution was investigated using a nitrogen porosimeter, and the dyeability of the treated fibers was discussed in terms of the porosity. In pore distribution, the polyester fibers treated with sodium hydroxide aqueous solution were characterized by higher amount of pores below $10\AA$ than those of the untreated fibers, and by shift of the pore size having maximum accumulated volume from $10\AA$ for the untreated fibers to $5~6\AA$. As the weight loss of the polyester fibers treated with sodium hydroxide aqueous solution increased, BET surface area and total pore volume increased linearly, but average pore size, showing some different aspect, increased steeply at earlier stage and then approached the maximum value. The dye uptakes of the polyester fibers treated with sodium hydroxide aqueous solution increased with the BET surface area, the total pore volume and the average pore size. The alkali treatment increased the surface area of polyester fibers, so that the chance of contact between the fiber and dye molecules increased. In addition, the pores created on the surface of polyester fibers by alkali treatment might act as pathways for dye molecules into the polyester fibers.

• 한국문화재보존과학회:학술대회논문집
• /
• 한국문화재보존과학회 2004년도 제20회 발표논문집
• /
• pp.66-71
• /
• 2004

When waterlogged wood dries up, it shrinks largely. And it is hard to recover original shape. Therefore it happens to lose the value of wood remains frequently. This paper studied how far dried waterlogged wood can recover original shape. Shape recovering course and extent are thoroughly investigated after waterlogged wood of Pinus densiflora, Quercus serrata and Styrax japonica oven-dries and instills varieties of test solution. At 1- step, oven-dried samples infiltrated by chlorous acid sodium or sodium hydroxide solution. At 2- step, wood tissues of samples were swelled by the fast decompression after infiltrating $CO_2-supercritical$ fluid at high pressure. The study investigated the possibility of shape recovering in waterlogged wood. Shape recovering rate is different with solution and wood species. Sample of sodium hydroxide solution doesn't swell anymore when using $CO_2-supercritical$ fluid. In general, the sample of sodium hydroxide solution has higher Shape recovering rate than $CO_2-supercritical$ fluid solution treated by chlorous acid sodium.

• 한국세라믹학회지
• /
• 제18권2호
• /
• pp.91-98
• /
• 1981

Synthetic zeolite A was prerared from domestic Hadong kaolin with sodium hydroxide solution and their ion exchange isotherms of $K^+$, $NH^{4+}$, $Li^+$ and $Ag^+$ ion were presented. The optimum reaction conditions for synthetic zeolite A from calcinated kaolin were 2 fold excess of 2N sodium hydroxide solution, 10$0^{\circ}C$ and 8 hours. It was observed that before the crystallization of zeolite A the samples reacted with sodium hydroxide solution had rather higher ion exchange capacities than zeolite A. The $K^+$-$Na^+$ and $Ag^+$$Na^+$ ion exchange isotherms were signoidal. The initial selectivity series was in the order $Ag^+$$K^+$>$Na^+$>$NH_4$>$Li^+$. Between approximately 33 and 67% replacement of soium ions the selectivity series became $Na^>$ and above 67% became $Ag^+$>$K^+$. Evidence were also presented to demonstrate that 8 out of 12 sodium ions per pseudo unit cell were not easily replaceable by lithium ions and 4 out of 12 not easily replaceable by ammonium ions.

• 대한화학회지
• /
• 제16권4호
• /
• pp.249-256
• /
• 1972

하동 kaolin을 NaOH용액으로 처리하여 그의 결정성을 X-선 분말회절법으로 조사하였다. 각 결정 생성의 최적 처리 조건은 다음과 같다. <표> Sodium A zeolite 결정 생성을 위해 적당한 $Na_2O 대 SiO_2$의 비는 0.5${\sim}$1.5이다. 생성된 Sodium A zeolite 의$ 25^{\circ}C$, 0.2N $CaCl_2$ 용액에서의 $Ca^{++}ion$ 교환능은 이론값의 65%였다.

• 한국세라믹학회지
• /
• 제15권1호
• /
• pp.21-27
• /
• 1978

Hadong Kaolin (Halloysite) was granulated cylindrically and treated with 1N aqueous sodium hydroxide solution for 6-48 hrs at 60-10$0^{\circ}C$. The crystalling structure of surface of the products was studied by X-ray powder diffraction method. The reaction rate of halloysite to sodium A zeolite showed a gradual decrease from surface to inner layer. At the surface layer, the reaction mechanism was observed as first order consecutive reaction as follows: halloysitelongrightarrowamorphous aluminosilicatelongrightarrowsodium A zeolitelongrightarrowhydroxysodalite By applying the above reaction mechanism, the rate constants and activation energies was measured.

• 한국환경과학회지
• /
• 제9권5호
• /
• pp.437-441
• /
• 2000

A study on the removal of Pb ion from Pb-contaminated soil was carried out using ex-site extraction process. Tartaric acid (TA) and iminodiacetic acid sodium salt(IDA) as a washing agent were evaluated as a function of concentration reaction time mixing ratio of washing agent and recycling of washing agent. TA showed a better extraction performance than IDA. The optimum washing condition of TA and IDA were in the ratio of 1:15 and 1:20 between soil and acid solution during 1 hr reaction. The total concentrations of Pb ion by TA and IDA at three repeated extraction were 368.8 ppm and 267.5 ppm respectively. The recovery of Pb ion from washing solution was achieved by adding calcium hydroxide and sodium sulfide form the precipitation of lead hydroxide and lead sulfide and optimum amounts of sodium sulfide and calcium hydroxide were 7 g/$\ell$ for the TA washing solution and 4 g/$\ell$, 5g/$\ell$ for the IDA washing solution respectively. The efficiency of recycle for TA and IDA washing solution were 78.8% , 95.1%, and 89.2%, 96.6% at third extractions under $Na_2S$ and $Ca(OH)_2$, respectively.

• 펄프종이기술
• /
• 제29권4호
• /
• pp.18-27
• /
• 1997

This study was performed to obtained the optimal delignified condition of exploded wood on the acid hydrolysis with sulfuric acid. Wood chips of pine wood(Pinus desiflora), oak wood(Quercus serrata) and birch wood (Betula platyphylla var. japonica) were treated with a high pressure steam (20-30kgf/$\textrm{cm}^2$, 2-6 minutes). The exploded wood was delignified with sodium hydroxide and sodium chlorite, and then hydrolyzed with sulfuric acid. The result can be summerized as follows ; In the exploded wood treated with sodium hydroxide, the optimal concentration of sodium hydroxide was 1% as content of lignin in the exploded wood. Lignin content of exploded wood treated with sodium chlorite was lower then that sodium hydroxide. The maximum reducing sugar yield of exploded wood treated with 1% sodium hydroxide was lower than non-treated exploded wood. In the case of sodium chlorite treated, the maximum reducing sugar yield was hgher than non-treated exploded wood. Sugar composition of acid hydrolysis solution was composed of xylose and glucose residue, and the rate of glucose residue was increased in high pressure condition.

• 한국가구학회지
• /
• 제19권5호
• /
• pp.358-364
• /
• 2008

Wood-inorganic material composite (WIC) was prepared by impregnating wood with copper sulfate ($CuSO_4\;5H_2O$) solution and by immersed wood in sodium carbonate($Na_2CO_3$) solution in order to introduce insoluble copper compounds {copper carbonate hydroxide, $CuCO_3\;Cu(OH)_2$} into the wood to give fungicidal effects in treated-wood. The weight percent gains (WPGs) of treated wood reached maximum value by impregnation of 20% copper sulfate solution and immersion in about 15% sodium carbonate solution for 24 hrs. Inorganic substances were present mainly in the lumina and cross-field pitting of tracheides. These substances were proved to be the insoluble copper carbonate hydroxide against water by the energy dispersive X-ray analyzer in conjunction with a scanning electron microscope (SEM-EDXA). The treated specimens showed high preservative effectiveness because the weight losses were hardly occurred by the fungi degradation test.