• Journal of Korean Society of Water and Wastewater
• /
• v.14 no.1
• /
• pp.99-107
• /
• 2000

In this article, the removal of surfactant by ozone and BAC was studied. Batch and pilot tests were carried out for these studies. In batch tests, efficiency of ozone oxidation process was evaluated for LAS(Linear Alkylbenzen Sulfonate) and SLS(Sodium Lauryl Sulfate) removal. Under oxidant conditions, the removal of LAS was more effective than that of SLS. The removal of surfactant was more enhanced with increasing pH in oxidant systems. Pilot tests are carried out with BAC single process and ozone oxidation/BAC combined process. The removal of LAS was more effective in ozone oxidation/BAC combined process than BAC single process about 10-20%. In the case of SLS, the efficiency of BAC single process was similar to that of ozone oxidation BAC combined process. According to temperature, the removal efficiency of SLS changed from 70% to 95% and initial concentration of surfactant had no effects on removal efficiency of SLC under applied temperature above $15^{\circ}C$.

• Membrane Journal
• /
• v.24 no.1
• /
• pp.69-77
• /
• 2014

To prepare the hollow fiber nanofiltration composite membranes, the poly(vinylidene fluoride) (PVDF) membrane was hydrophilized with $K_2Cr_2OH$ and $KMnO_4$ aqueous solutions. And then the composite membrane was synthesized on that membrane surfaces using interfacial polymerization with piperazine (PIP) and trimesoyl chloride (TMC). The resulting membranes were characterized in terms of the rejection and flux for NaCl, $CaSO_4$, $MgCl_2$ 100 ppm solution and 300 ppm of NaCl and $CaSO_4$ mixed solution by varying the coating time, drying time, and the concentration of the coating materials. As a result, the higher rejections were shown for $K_2Cr_2OH$ solutionas a hydrophilization material, and the flux was enhanced while the rejection reduced as the hydrophilization time is longer. Also, the rejection increased and the flux reduced as the concentrations of triethyl amine (TEA) and sodium lauryl sulfate (SLS) were higher. Typically, the rejection 50% and flux 40 LMH for NaCl 100 ppm solution, and the rejection 55% and flux 48 LMH for $CaSO_4$ 100 ppm solution were obtained for the PVDF hollow fiber composite membrane prepared with the conditions of PIP 2 wt% (Triethyl amine (TEA) 7 wt%, SLS 20 wt% mixed solution against PIP concentration) and TMC 0.1 wt%.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.9
• /
• pp.3341-3346
• /
• 2010

Dentifrices comtaining SLS of 2.2% and 0.0% were applied to 60 subjects for 4 weeks in this study. Dentifrice is used for salivary and oral bacteria amount change according to its SLS contents in toothpaste. The results were as follows. Anaysis of LSL contents befor and after the after experiment in salivary and bacterial count oral cavity didn't show significant difference in time interval. There was no correlation between salivary flow rate and bacterial count in the oral cavity according to content of SLS. Dentifrice of 2.2% content satisfied the subjects much more than that of 0.0% content(p<0.001).

• Journal of Pharmaceutical Investigation
• /
• v.18 no.2
• /
• pp.61-67
• /
• 1988

The influence of different suppository bases on the dissolution, and the bioavailability of aspirin suppositories in rabbits and humans was investigated using Witepsol H15 (WIT), WIT-Tween 80 (TWE), WIT-sodium lauryl sulfate (SLS), polyethylene glycol (PEG), hollow WIT (WIT-HOLL) and capsule incorporated into WIT (WIT-CAP). The results obtained were as follows: 1) Dissolution rates of aspirin suppositories with different bases in distilled water were faster in the order of WIT-TWE >WIT-SLS >PEG >WIT-HOLL >WIT >WIT-CAP. 2) The maximum blood levels $(C_{max})$ of aspirin in rabbits and humans were highest in WIT-TWE and WIT-SLS bases, but $C_{max}$ from WIT base was lower than that in oral administration of aspirin suspension. 3) The times reaching the maximum blood levels $(T_{max})$ in rabbits were 1 hr for oral administration, 1.5-2.5 hr for WIT-TWE, WIT-SLS, PEG, and WIT bases, and 2.5-4.0 hr for WIT-HOLL and WIT-CAP bases, but $T_{max}$ in humans were 1 hr for oral administration and WIT-TWE base, and 2-4 hr for WIT and WIT-HOLL bases. 4) Relative bioavailability (RBA) of aspirin suppositories in rabbits was higher in WIT-SLS, WIT-TWE and PEG bases than that in oral administration, and RBA of aspirin suppositories in humans was higher in the order of WIT-TWE >PEG >WIT-HOLL >oral >WIT bases tested. 5) Good correlation between dissolution rates and $C_{max}$ was obtained: y = 0.60x+32.23 (r = 0.96) for rabbits, and y = 0.60x+35.74 (r = 0.97) for humans.

• Journal of Korean Society for Atmospheric Environment
• /
• v.16 no.4
• /
• pp.381-388
• /
• 2000

Ceramic foam prepared with cordierite as a starting material by foam method was tested to evaluate the feasibility as a filter for the dust collection in hot gas. Two different types of agents Benzethonium chloride (BZTC, C27H42NO2Cl) and Sodium Lauryl Sulfate(SLS, CH3(CH2)11OSO3Na) were used as foaming agents in foaming process. Porosityof ceramic foam was about 80% and mean pore size were 100${\mu}{\textrm}{m}$ for SLS agent and 200 ${\mu}{\textrm}{m}$ for BZTC. It was observed that ceramic foam was composed of continuous macro-pore structure with opening windows interconnecting macro-pores. The surface of ceramic foam support of was coated with cordierite particles ranged from 20${\mu}{\textrm}{m}$ to 50${\mu}{\textrm}{m}$ Meso-pore size in the coating layer on ceramic foam was below 10${\mu}{\textrm}{m}$. While air permeability of the support increased with increasing macro-pore size coated ceramic filters showed a constant permeability without regard to the macro-pore size of the support. The permeabuilities of support varied in the range of 600$\times$10-13m2 to 1000$\times$10-13m2. For the case of coated ceramic filter it was about 200$\times$10-13m2. As a result of particle trapping test by using fly ash the particle removal efficiency was over the 99.9%.

• Journal of the Korean Applied Science and Technology
• /
• v.19 no.4
• /
• pp.265-272
• /
• 2002

$CaCO_{3}$ absorbed sodium lauryl sulfate (SLS) surfactant was prepared, Core-shell polymers of inorganic/organic pair, which have both core and shell component, were synthesized by sequential emulsion polymerization using styrene(St) as a shell monomer and potasium persulfate (KPS) as an initiator, We found that when $CaCO_{3}$; core prepared by adding 2,0 wt% SLS, $CaCO_{3}$ core/PSt shell polymerization was carried out on the surface of $CaCO_{3}$ particle without forming the new PSt particle during St shell polymerization in the inorganic/organic core-shell polymer preparation, The structure of core-shell polymer were investigated by measuring the degree of decomposition of $CaCO_{3}$ using HCl solution, thermal decomposition of polymer composite using thermogravimetric analyzer and morphology by scanning electron microscope.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.26 no.1
• /
• pp.17-40
• /
• 2000

Cytotoxicity assays using artificial skins have been proposed as in vitro alternatives to minimize animal ocular and dermal irritation testing. Accordingly, the responses of artificial skins to the well-characterized chemical irritants toluene, glutaraldehyde, and sodium lauryl sulfate (SLS), and the nonirritant polyethylene glycol were studied. The evaluation of the irritating and non-irritating test chemicals was also compared with the responses observed in human dermal fibroblasts and human epidermal keratinocytes grown in a monolayer culture. The responses monitored included an MTT mitochondrial functionality assay. In order to better understand the local mechanisms involved in skin damage and repair, the production of several mitogenic proinflammatory mediators, interleukin-l$\alpha$, 12-HETE, and 15-HETE, was also investigated. Dose-dependent increases in the levels of かIn and the HETEs were observed in the underlying medium of the skin systems exposed to the two skin irritants, glutaraldehyde and SLS. The results of the present study show that both human artificial skins can be used as efficient in vitro testing models for the evaluation of skin toxicity and for screening contact skin irritancy.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.28 no.1
• /
• pp.186-201
• /
• 2002

Fructan(Levan)은 식물체 및 미생물에서 발견되는 탄수화물로 이는 과당(fructose)이 $\beta$-2, 6 결합으로 연결되어 있는 polysaccaride 이다. 본 연구에서는 Fructan을 생성하는 미생물(Zymomonas mobilis)과 10% sucrose(기질), 1-2% 효모 추출물을 주성분으로 하는 배지를 사용하여 30-37$^{\circ}C$, pH 5.0-7.0에서 20-24시간 동안 배양한후 원심분리하여 균체를 제거하고 3배량의 알코올을 가하여 침전, 건조하여 얻은 Fructan의 화장품 원료로서의 가능성을 조사하였다. 보습효과에 있어서는 Hyaluronic acid와 유사하였으며, keratinocyte에 대한 세포증식 효과를 나타내었다. 또한 3-D culture에 의해 구축된 생인공 피부내에 0.05%의 sodium lauryl sulfate (SLS)를 사용하여 피부자극에 의한 초기 염증 반응을 유도한후 0.01mg/m1, 0.05mg/m1의 Fructan을 각각 처리하였을 때, SLS만을 처리한 생인공피부와 비교하여 세포증식효능을 보였고, SLS 자극물질로 유도된 전염증성 조절인자인 interleukin-l$\alpha$(IL-l$\alpha$)의 분비량을 조사 하였을때 0.01mg/ml, 0.05mg/ml의 Fructan을 처리한 생인공피부의 IL-l$\alpha$ 양이 Fructan을 처리하지 않은 것보다 상대적으로 감소하였다. 이러한 결과로 Fructan이 생인공 피부내 피부 세포의 증식효과를 나타낼 뿐만 아니라, 또한 피부자극물질에 의한 염증반응에 대해 자극완화효능이 있음을 알 수 있었다. 섬유아세포 및 동물을 이용한 안전성 시험에서도 독성이 없는 안전한 원료로 평가되었다.

• Archives of Pharmacal Research
• /
• v.26 no.8
• /
• pp.659-665
• /
• 2003

We have studied the effect of rhEGF on the buccal mucosal ulcer healing. rhEGF was rapidly degraded upon incubation with the hamster buccal mucosal homogenates; The degradation of rhEGF was significantly inhibited by sodium lauryl sulfate (SLS). Eudispert hv hydrogel and Polycarbophil 974P hydrogel were prepared for rhEGF delivery and their mucoadhesiveness was measured by the $Instron^R$ method. The mucoadhesive force of Eudispert hv was significantly greater than that of Polycarbophil 974P. Moreover, rhEGF in Eudispert hv hydrogel remained stable for about 2 months. To evaluate the ulcer healing effect of rhEGF, the buccal mucosal ulcer was induced in golden hamsters using acetic acid. At 24 h after administration of rhEGF/Eudispert hv hydrogel, the ulcerous area was decreased compared with rhEGF solution and, as a result, the curative ratio was $36.8\pm5.68$%. By the addition of SLS (0.5%) to Eudispert hv hydrogel, the curative ratio increased 1.5 times. The mechanism of the action was probably due to a combination of protection of the drug against proteases present in mucosa and prolongation of the release of rhEGF from the formulation at the site of action.

• Korean Chemical Engineering Research
• /
• v.47 no.4
• /
• pp.470-475
• /
• 2009

To study the optimal synthesis conditions of aqueous acrylic adhesive using emulsion polymerization, the effects of monomer, surfactant and initiator on the adhesive properties, such as conversion rate, particle size, peel strength, and glass transition temperature, were investigated. 2-EHA, n-BA and MMA were used as main monomers, 2-HEMA and AAc as functional monomers, SLS as surfactant and APS as initiator, respectively. The conversion rate was over 95% at 3.75% surfactant(SLS/monomer), 0.612% initiator(APS/monomer) and $82^{\circ}C$ reaction temperature. When the excess amount of surfactant or initiator was used, the peel strength represented decreasing tendency. The maximum conversion rate and peel strength were obtained at 65% 2-EHA/monomer, 20% BA/monomer, and 10% MMA/monomer.