• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.1070-1073
• /
• 2002

The biomechanical interaction between the stump and the prosthetic socket is critically important to achieve close-to-normal ambulation. Many investigators suggested that the pressure changes during gait of transfemoral amputees are closely related to the prosthetic alignment, the socket shape, the stump size, and the residual muscle activity. The effects of the prosthetic alignment, the socket shape, and the stump size on the interface pressure were investigated previously. However, there is no report how the residual muscle activities in the transfemoral stump affect the socket interface pressure characteristics during gait. Since designs of socket fur lower limb amputees need to consider the socket interface pressure characteristics, the interface pressure patterns by the residual muscle activities during gait should be investigated. In this study, myoelectric signals (MES) and socket interface pressure in residual limb of transfemoral amputees were measured during the stance and swing phases of gait. For the purpose, specially designed quadrilateral sockets that MES electrodes could be instrumented were fabricated. A total of two transfemoral amputees were participated in the experiments. The measured temporal MES amplitude and interface pressure in knee flexor (biceps femoris) and extensor (rectus femoris) had significant correlations (P ＜ 0.05). Based on the test results, It was suggested that the residual muscle activity of transfemoral amputees stump is an important factor affecting socket pressure changes during walk.

• Earthquakes and Structures
• /
• 제25권2호
• /
• pp.89-97
• /
• 2023

In order to obtain the impact of socket connection interface forms and socket gap sizes on the seismic performance of reinforced concrete (RC) socket prefabricated bridge piers, quasi-static tests for three socket prefabricated piers with different column-foundation connection interface forms and reserved socket gap sizes, as well as to the corresponding cast-in-situ reinforced concrete piers, were carried out. The influence of socket connection structure on various seismic performance indexes of socket prefabricated piers was studied by comparing and analyzing the hysteresis curve and skeleton curve obtained through the experiment. Results showed that the ultimate failure mode of the socket prefabricated pier with circumferential corrugated treatment at the connection interface was the closest to that of the monolithic pier, the maximum bearing capacity was slightly less than that of the cast-in-situ pier but larger than that of the socket pier with roughened connection interface, and the displacement ductility and accumulated energy consumption capacity were smaller than those of socket piers with roughened connection interface. The connection interface treatment form had less influence on the residual deformation of socket prefabricated bridge piers. With the increase in the reserved socket gap size between the precast pier column and the precast foundation, the bearing capacity of the prefabricated socket bridge pier component, as well as the ductility and residual displacement of the component, would be reduced and had unfavorable effect on the energy dissipation property of the bridge pier component.

• 한국전문물리치료학회지
• /
• 제13권4호
• /
• pp.71-78
• /
• 2006

This study examined the effects of socket flexion angle in trans-tibial prosthesis on stump/socket interface pressure. Ten trans-tibial amputees voluntarily participated in this study. F-socket system was used to measure static and dynamic pressure in stump/socket interface. The pressure was measured at anterior area (proximal, middle, and distal) and posterior area (proximal, middle, and distal) in different socket flexion angles ($5^{\circ}$, $0^{\circ}$, and $10^{\circ}$). Paired t-test was used to compare pressure differences in conventional socket flexion angle of $5^{\circ}$ with pressures in socket flexion angles of $0^{\circ}$ and $10^{\circ}$ (${\alpha}$=.05). Mean pressure during standing in socket flexion angle of $10^{\circ}$ decreased significantly in anterior middle area (19.7%), posterior proximal area (10.4%), and posterior distal area (16.3%) compared with socket flexion angle of $5^{\circ}$. Mean pressure during stance phase in socket flexion angle of $0^{\circ}$ increased significantly in anterior proximal area (19.3%) and decreased significantly in anterior distal area (19.7%) compared with socket flexion angle of $5^{\circ}$. Mean pressure during stance phase in socket flexion angle of $10^{\circ}$ decreased significantly in anterior proximal area (19.6%) and increased significantly in anterior distal area (8.2%) compared with socket flexion angle of $5^{\circ}$. Peak pressure during gait in socket flexion angle of $0^{\circ}$ increased significantly in anterior proximal area (23.0%) compared with socket flexion angle of $5^{\circ}$ and peak pressure during gait in socket flexion angle of $10^{\circ}$ decreased significantly in anterior proximal area (22.7%) compared with socket flexion angle of $5^{\circ}$. Mean pressure over 80% of peak pressure ($MP_{80+}$) during gait in socket flexion angle of $0^{\circ}$ increased significantly in anterior proximal area (23.9%) and decreased significantly in anterior distal area (22.5%) compared with socket flexion angle of $5^{\circ}$. $MP_{80+}$ during gait in socket flexion angle of $10^{\circ}$ decreased significantly in anterior distal area (34.1%) compared with socket flexion angle of $5^{\circ}$. Asymmetrical pressure change patterns in socket flexion angle of $0^{\circ}$ and $10^{\circ}$ were revealed in anterior proximal and distal region compared with socket flexion angle of $5^{\circ}$. To provide comfortable and safe socket for trans-tibial amputee, socket flexion angle must be considered.

• 한국멀티미디어학회논문지
• /
• 제8권11호
• /
• pp.1472-1482
• /
• 2005

TOE (TCP/IP Offload Engine)는 부하가 많은 대규모 네트워크 서버에서 TCP/IP 프로토콜 처리의 부담을 줄이기 위해 고안된 하드웨어 장치이다. 본 논문에서는 TOE (TCP Offload Engine)를 사용하는 대규모 멀티미디어 서버를 위한 소켓 인터페이스 계층의 설계 및 구현에 대해 다룬다. 제안된 소켓 인터페이스 계층은 리눅스 운영체제 상에서 커널 모듈로 설계, 구현되었으며, BSD소켓 계층과 INET소켓 계층 사이에 존재하면서 응용 프로그램의 소켓 관련 요청을 TOE나 기존 INET소켓 계층으로 전달하는 역할을 한다. 본 논문에서 제안한 소켓 인터페이스는 소켓을 통해 TOE를 사용하는 응용 프로그램에 대해서 모든 표준 소켓 입출력 API와 파일 입출력 관련 API를 그대로 제공하고, 기존 응용 프로그램들에 대해서도 수정 없이 TOE의 기능을 그대로 사용할 수 있는 바이너리 수준의 호환성을 제공하며, 한 시스템에서 TOE와 이더넷 NIC을 동시에 사용할 수 있게 된다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 1998년도 추계종합학술대회
• /
• pp.500-506
• /
• 1998

This paper proposes an extension scheme of the well-known Berkeley Socket Interface for supporting QoS-provided multipeer multimedia communications. The current BSD Socket Interface has been TCP/IP-centric historically and the protocol suite was developed for the peer-to-peer best effort data communications. In order to support multiparty multimedia applications, such key functions as group management, QoS control, and reliable multicast transport should be exploited in the current simple unicast communication architecture and the well-known interface should be extended to cover the functions. This paper proposes a few new API functions and some changes in the current APIs.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1997년도 춘계학술대회
• /
• pp.249-252
• /
• 1997

A study on static and dynamic socket pressure distributions on a trans-femoral amputee with a suction socket was performed in order to assess an optimal socket fitting and function. Even for the amputee's static neutral position, pressure concentrations were observed in the lateral, medial, and posterior planes of the socket. During free walking, a significant movement of pressure concentration areas was observed. Large socket pressure was observed in the lateral, medial-anterior and posterior walls during mid-stance or push-off period. Socket pressure measurement will be one of the good tool to determine the optimal socket-limb interface.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술회의 논문집 정보 및 제어부문 B
• /
• pp.673-676
• /
• 2003

In this paper, we designed the embedded system used for wireless LAN communication. Embedded system kernel is made from general linux kernel 2.4.18 by applying the ARM patch (2.4.18-rmk7) and the SA1100 patch(2.4.18-rmk7), then porting board level suitable to target system. The SA-1110 PCMCIA interface provides controls for one PCMCIA card slot with a PSKTSEL pin for support of a second slot. The embedded system requires external logic to complete the PCMCIA socket interface. For dual-voltage support, level shifting buffers are required for all SA-1110 input signals. Hot insertion capability requires that each socket be electrically isolated from each other, and from the remainder of the memory system. embedded system is for socket services approaching PCMCIA socket, detecting number of sockets, sensing insertion and removal, and applying power. It also provides interface with Card services. Embedded system supports Host driver for lucent chips that is installed orinoco driver cross compiled. The meaning can say that is doing wireless LAN communication through wireless LAN in imbedded system.

• 대한의용생체공학회:의공학회지
• /
• 제19권4호
• /
• pp.417-422
• /
• 1998

본 연구는 대퇴의족착용자의 정적중립상태 및 자유보행시에 단단부와 소케의 경계에 작용하는 압력 분포를 측정하였다. 정적중립상태에서는 단단부의 외측과 내측면과 후면에서 압력집중현상이 나타나고, 자유보행시는 이러한 압력집중이 보행중에 일정한 형태로 이동함을 알 수 있었다. 최대 소켓압력은 중간입각기나 발뒤축들림기에 외측, 내측 앞쪽, 후면에서 나타나고 있고, 소켓과 단단부 사이의 상태를 확인하는 방법중 하나로 소켓 압력 측정을 사용할 수가 있다.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1997년도 추계학술대회
• /
• pp.369-372
• /
• 1997

Socket pressure distributions with gait analyses of a transfemoral and a transtibial prostheses were measured in order to assess an optimal socket fitting and unction. Ankle joint was aligned by the neutral and the dorsi/plantar flexed positions. Compared to dorsi and plantar flexed positions of ankle joint, cadence and walking speed increased with the neutral ankle joint alignment. Other gait parameters were close to the normative data with the neutral ankle joint alignment. For the transfemoral amputee, dorsiflexed alignment of the ankle joint created high pressure on the lateral aspect of the socket, on the other hand, plantarflexed alignment resulted in increased pressure on the medial aspect of the socket. For the transtibial amputee, dorsiflexed alignment of the ankle resulted in high pressure on the antero-lateral aspect of the socket during mid-stance, but plantarflexion of the ankle joint showed slight increases in pressure at the same location in the socket. The present study clearly demonstrated that malalignment of a prosthesis results in localized increasing pressure within the socket. Proper alignment of the prosthesis is required in order to acquire an appropriate socket-limb interface as well as the proper gait.

• 인터넷정보학회논문지
• /
• 제8권5호
• /
• pp.11-20
• /
• 2007

본 논문은 자바 언어로 완성된 MPI(Message Passing Interface) 스펙인 MPJ(Message Passing in Java) 스펙을 준수하여 병렬 컴퓨팅 환경에서 메시지 통신 인터페이스를 제공하는 JMPI(Java Message Passing Interface) 라이브러리를 설계하고 구현하였다. 이 라이브러리는 간단하면서도 매우 편리한 GUI(Graphical User Interface) 도구를 제공하여, 사용자가 손쉽게 병렬 컴퓨팅 환경을 구성할 수 있다. 또한, 본 논문에서는 두 가지 전형적인 분산 시스템 통신 메커니즘인 소켓과 RMI(Remote Method Invocation) 방식을 이용하여 두 가지 버전의 시스템을 구현하였고, 기존의 JPVM 시스템과의 성능을 벤치마크 애플리케이션들을 통하여 컴퓨터 대수의 증가에 따른 처리 속도를 비교해 보았다. 실험 결과로는 본 논문에서 제시한 JMPI 시스템이 JPVM시스템보다 다양한 측면에서 높은 성능을 발휘한다는 것과 컴퓨터의 가장 효율적인 처리 속도는 애플리케이션에 따라 컴퓨터의 수를 증가시킨다고 해서 일정하게 처리속도가 증가하는 것이 아니라 네트워크의 트래픽을 고려하여 컴퓨터의 수를 증가시켰을 때 얻을 수 있다는 것을 보여준다. 마지막으로 컴퓨터의 수가 증가함에 따라 RMI를 사용하여 메시지를 전달하는 것이 소켓에 부속된 객체 스트림을 사용하여 메시지를 전달하는 것보다 효과적이라는 것을 알 수 있다.