• 제목/요약/키워드: Soar

검색결과 33건 처리시간 0.023초

An MHD Simulation of the X2.2 Solar Flare on 2011 February 15

  • Inoue, Satoshi;Choe, Gwangson
    • 천문학회보
    • /
    • 제39권1호
    • /
    • pp.69.1-69.1
    • /
    • 2014
  • We perform an MHD simulation combined with observed vector field data to clarify an eruptive dynamics in the solar flare. We first extrapolate a 3D coronal magnetic field under a Nonlinear Force-Free Field (NLFFF) approximation based on the vector field, and then we perform an MHD simulation where the NLFFF prior to the flare is set as an initial condition. Vector field was obtained by the Soar Dynamics Observatory (SDO) at 00:00 UT on February 15, which is about 90 minutes before the X2.2-class flare. As a result, the MHD simulation successfully shows an eruption of strongly twisted lines whose values are over one-turn twist, which are produced through the tether-cut magnetic reconnection in strongly twisted lines of the NLFFF. Eventually, we found that they exceed a critical height at which the flux tube becomes unstable to the torus instability determining the condition that whether a flux tube might escape from the overlying field lines or not. In addition to these, we found that the distribution of the observed two-ribbon flares is similar to the spatial variance of the footpoints caused by the reconnection of the twisted lines being resided above the polarity inversion line. Furthermore, because the post flare loops obtained from MHD simulation well capture that in EUV image taken by SDO, these results support the reliability of our simulation.

  • PDF

RIMS 데이터와 도시철도차량 차륜관리에 관한 연구 (A Study of Appling RIMS of Train's Wheels Management)

  • 전서탁;이도선;김동민;박수중;김남우
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2008년도 추계학술대회 논문집
    • /
    • pp.666-672
    • /
    • 2008
  • Train wheels are the most important part of the high-speed rail system with supporting body, running stably and safely. Wheel exchange and fix plan is computed by the worker who managing entire Train Maintenance Process based on his know-how so that this system is losing its reliability and accuracy. And predicting of the wheel's lifetime is absolutely difficult matter because of uncertainty between trains like mileage of the type of trains, condition of operation, curve section and wheel's cutting pattern. Therefore workers always used to hold many wheels. For this reason, the cost of stock is soar when the level of stock was normal. If the stock is sufficient, the cost of stock will rise. On the other hand, If the stock is deficient, we would have trouble that the plan of the train maintenance process will be failed. Thus this paper aimed at application that "Wheel Managing System" which is able to predict wheel's life-cycle and demands under the RIMS(Rolling-Stock Information Maintenance System) with analysing wheel exchanging and cutting status considering economical or stable aspects.

  • PDF

백시트를 반사재로 이용한 양면태양광 발전시스템 특성평가 (Characteristic Evaluation of Bifacial Solar Module Power Plant Using Back Sheet as Reflective)

  • 김현준;조민재;차형우;김광호
    • 반도체디스플레이기술학회지
    • /
    • 제21권2호
    • /
    • pp.112-116
    • /
    • 2022
  • The demand for a rear reflective material is continuing according to the expansion of the bifacial soar module and the effect on the re-reflection of the ground using a back sheet that is not used due to the increase in the supply of the bifacial solar module was confirmed. For analysis, a bifacial solar module with an output of 445W was connected to a single inverter of 49.84kW, and analysis of each two inverters was carried out. In the analysis of the results, it was confirmed that the generation amount increased by 5.25% compared to the case where the back sheet reflective film was not installed and it was confirmed that the increase in the generation amount was the noon time when strong solar radiation was irradiated, not the time of sunrise and sunset.

태양광발전 연계 시스템에 의한 PWM 전류형 인버어터에 관한 연구 (A study on the PWM(pulse witdh modulation) current source Inverter with utility)

  • 황락훈;최호규;신양호;이춘상;김주래;조상로;조문택
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2001년도 하계학술대회 논문집 B
    • /
    • pp.1020-1022
    • /
    • 2001
  • because the output of solar cell is direct, it is necessary to install D/A converter system for A.C load, and in case of driving utility line system, it is possible to drive system relation when the system supplies sinusodal current ant voltage having unit power factor. As the characteristics of the soar cell output the is influenced by dailysunight charge, for more electric power it is essential to control the direction toward the san so that the driving point of solar cell can always operate near maximum output point. PWM modulation device among electric power converters must have stable modulation at anytime when it includes noise-factors such as noise-wave and noises on electric voltage wave, a synchronous signal system. In dealing with synchronous signal for control and control signal by microprocessor, it is necessary to compensate it because there is time difference between sample paint and carrier wave. On this papers, single phase PWM current type invertor controled the solar cell having typical voltage dropping character has optimun short current in short, reduces D.C reactance, composes controller for modulation and keeps lower harmonic and high power factor keeping maximum output of solar cell according daily sunlight charge variation.

  • PDF

Radon RBF Network에 의해 그린 보증 함수의 근사화 (Approximation of Green Warranty Function by Radon Radial Basis Function Network)

  • 이상현;임종한;문경일
    • 한국인터넷방송통신학회논문지
    • /
    • 제12권3호
    • /
    • pp.123-131
    • /
    • 2012
  • 오래 전부터 연료의 가격은 상승하고 있다. 제조업체는 보증을 통해 실용적인 대안을 찾고자 전기와 강력한 바이오 연료를 이용하여 차량의 성장가능을 연구하고 있다. 이제, 이러한 녹색 환경(emission) 관련된 보증은 보증기간이 확장되며, 이러한 보증을 "수퍼 보증" 이라 불린다. 본 논문의 주요 결과는 라돈 변환의 역행렬을 보증공간의 수치를 줄이기 위해 사용되며, 응용 프로그램 및 RBF 네트워크를 사용하여 대략적인 이변량의 보증 기능에 새로운 방법을 제시한다. 이 방법은 다음과 같은 단계로 구성되어 있다. 첫째, 라돈 변환을 이용하여, 이변량 보증 함수의 1차원 함수를 줄일 수 있다. 둘째, 1 차원 함수의 각 신경 서브 네트워크와 신경 네트워크 기법을 사용하여 근사할 수 있다. 셋째, 이러한 신경 sub-networks 형태로 최종 근사 신경망 함께 결합 된다. 넷째, 라 돈 변환의 역함수 값을 사용 하여 최종 근사 신경 네트워크에 우리가 주어진 함수 근사화를 얻을 수 있다. 또한, 우리는 자동차 회사의 일부 그린 보증 데이터를 가지고 위의 방법을 적용한다.

주거환경개선지구 다가구주택 환경 개선 방안에 관한 임차인 요구 조사연구 (A Proposal to improve environment for multi-family housing residence in amelioration area)

  • 황선혜;김다해;안창헌;이연숙
    • 한국주거학회:학술대회논문집
    • /
    • 한국주거학회 2008년 추계학술발표대회 논문집
    • /
    • pp.140-143
    • /
    • 2008
  • As the number of family living alone is expected to soar due to a change in socio-demographics like divorce, more middle-aged women returning to work, homes become smaller and so on. In addition to in 2020 these people will be increase so that 85 percent of the Koreans compose elderly living alone who is over 65. This study aims at developing a sharing-typed elderly people-centered rental model which is accessible in the community integration dimension as an alternative and finding out theirconscious, their need about residence. and we need to check about their major requirements on improvement step by step. so that we suggest the desirable way on the existing multi house. The model provides benefits in the social, economical and pragmatic dimensions as the families living alone get together and living with others, Particularly, as a residence model which reduces a psychological loneliness and at the same time enables the elderly to continue to live a life in the community while they live together with other people, this model could be a strategy which supports the "Aging in Place." This study is in progress via small group workshop which debate gradually about special subject with similar group member. So we can find the residence's preference on living environment in various condition and the member can imagine freely on their future living arrangement by giving the various informations which can be proceed in future. The workshop proceed three times. at the first workshop, we're check their living environment and satisfaction level. and second time we give the knowledge about shared-type rental house then discuss about the model. and last time we're listen to the residence's opinion.

  • PDF

노근(蘆根)과 모근(茅根)에 대한 문헌고찰(文獻考察) (Literature Investigation of Phragmites communis Trin.[蘆根] and Imperata cylindrica var. koenigii[茅根])

  • 조남경;김종덕
    • 사상체질의학회지
    • /
    • 제21권2호
    • /
    • pp.48-57
    • /
    • 2009
  • 1. Objective : The object of this thesis is to find the basis of Constitution assignment of Nogeun(蘆根, Phragmites communis Trin.) used to the medication for Taeyangin. Also, it is to recognize what kind of Constitution of Mogeun(茅根, Imperata cylindrica var. koenigii) is needed to be assigned to. 2. Methods "Dongyi Soose Bowon", 'SinchukBon', 'ChobonKwun', other related Sasang Constitutional Medicine(SCM) books, herbal medicine books such as "Boncho Kangmok", and etc. were compared and researched. 3. Results & Conclusions : 1) Nogeun(蘆根) lowers Qi and harmonizes the body. Because of the effect of lowering soar-Qi(氣), it used to treat the symptoms of Taeyangin's vomiting(噎膈反胃, Stomach reflux due to dysphagia-occlusion). Also Yuksoo Nogeun(逆水蘆恨, Reed growing near the river in low scream) is the basis of considering inhale-gathering Qi effect as a major indication of Nogeun. 2) The theory of classifying White Mogeun as a Tae-eumin Medicinal is based on the effect of Radiating while classifying White Mogeun as a Taeyangin Medicinal is based on the effect of treating stomach reflux(反胃). But both basis are not conclusive and thus requires further study. 3) In "Sasang Geumge Bibang", the first text ever to write only about separate medicinals and Classified Foods (食物類) of each constitution, there were examples of Nogeun and Mogeun's usage based on other pre-existing medical texts. 4) Because White Mogeun is classified as Tae-yangin medication in "Dongmu Yugo", but classified as a Taeeumin's medication in "Dongyi Soose Bowon" 'ChobonKwun' and "Sasang Geumge Bibang", there remains a controversy.

  • PDF

3D-printed Face Shields for Healthcare Professionals Battling COVID-19 Pandemic

  • Kim, Gyeong-Man;Assefa, Dawit;Kang, Joon Wun;Gebreyouhannes, Esayas
    • 적정기술학회지
    • /
    • 제6권2호
    • /
    • pp.226-237
    • /
    • 2020
  • As the number of reported COVID-19 cases rises around the world, regions affected by the virus are taking serious measures to contain its spread. Face shields are one of the highest-need personal protective equipment (PPE) during COVID-19 pandemic. Beyond traditional face masks, as known cases of the coronavirus soar, currently there is a significant shortage of face shields around the world. In response, the protective face shields were designed and fabricated with open-source 3D modelling software and 3D printing technology, respectively. Our face shield consisted of two parts only; a reusable 3D printed headband and a visor made of transparent plastic sheet, as barrier. The resulting 3D printed face shields are affordable, lightweight, one-size-fits-most and ready-to-wear with minimal assemblies, and go on easily over glass, goggle and face mask. To ensure being donated to the healthcare professionals without risk infected by any pathogens, the 3D printed face shields were successfully be disinfected with ultraviolet germicidal irradiation (UVGI dosage of 1000 mJ/cm2) and 70% alcohol. For routine disinfection a UVGI chamber was designed and optimized to provide uniform UV-C illumination with an appreciated fluence for complete decontamination. More than 1,000 face shields were produced already and donated to the special hospitals for COVID-19 patients, quarantines, government and medical agencies in Ethiopia as well as in East-African countries. With certainty, our intention goes beyond the hospitals and other first responders, but not limited for all those who have to stay in the service or be in contact with many other people in the time of COVID-19 pandemic.

Emergence of New Business Mode in the Chinese Water Market - Hefei Wangxiaoying Wastewater TOT Project -

  • Lee, Seung-Ho
    • 한국수자원학회:학술대회논문집
    • /
    • 한국수자원학회 2011년도 학술발표회
    • /
    • pp.20-20
    • /
    • 2011
  • The purpose of this research aims to evaluate the emergence of new business mode in the Chinese water market since the mid-2000s - Transfer-Operate-Transfer(TOT) Projects. The study pays special attention to the case of the Hefei Wangxiaoying Wastewater Treatment TOT Project, which was awarded to the consortium of Berlin Water International and its Chinese partner in late 2004. The consortium secured an exclusive operating right for 23 years on the basis of a TOT scheme and would take responsibility of all the profits and losses in the operation of the plant. The total investment for the transfer amounted to RMB 491 million(US$70 million). The price was more than 288% of the original value, RMB 170 million (US$24 million). The project can be regarded as a successful case because of the following three causes. First, the Hefei government followed a series of standardized procedures in the international bidding, which ignited best-performed international players' competition for the project. Second, the project will bring in cutting-edge operation skills and management know-how. Third, the government succeeded in raising public asset values, and thanks to this, the government is able to consider other similar projects not only in the water sector but also other sectors in public utility services. Nevertheless, Berlin Water's point of view, there are several challenges. First, the company took a risk to pay such a large amount of cash to the Hefei government. Although such premium can be recouped in the operation period of 23 years, whether or not the company would be able to recover the initial investment and realize profits is in question due to an uncertainty of socio-political circumstances in China. Second, Berlin Water should expect a steep rise of water tariffs over the contract period in order to get the investment back. Water pricing is still a sensible matter to Chinese authorities, and therefore, it is uncertain if such rise of water tariffs would be possible. Third, the TOT mode leads to creation of a large amount of cash to government officials, which might have caused corruption between those who are involved in TOT deals. Then, the final contract fee would soar, which often results in the burden of normal customers. As discussed, the TOT mode has drawn much attention of foreign investors as a new alternative to enter into the Chinese water market. But it is important to note that foreign investors should be aware of possible risks in water TOT projects, which reflects some features of the Chinese political economy landscape and social norms. The Hefei case indicates that benefits can overshadow risks in TOT projects, which will continue to attract foreign investors that are dedicated to establishing their strongholds in the Chinese water market.

  • PDF

열전달 향상 장치에 따른 평판형 태양열 집열기의 압력강하 및 열전달 특성 (Pressure drop and heat transfer characteristics of a flat-plate solar collector with heat transfer enhancement device)

  • 안성후;신지영;손영석
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제37권5호
    • /
    • pp.453-460
    • /
    • 2013
  • 평판형 태양열 집열기의 효율을 높이기 위한 방법으로 열전달 향상 장치의 삽입, 표면 거칠기의 변화 등 다양한 방법들이 알려져 있다. 본 연구는 실험을 통해 다양한 열전달 향상 장치를 제작하고 이를 덕트에 삽입해 실험을 수행하였다. 실험은 기본적으로 덕트 윗 평판에 일정한 열유속을 가하였고, 삽입된 모델은 매끈한 덕트 형상(Base case)과 Chamfered rib $10^{\circ}$, Chamfered rib $20^{\circ}$, Rib & Groove, Rib & Dimple 모델이다. 실험은 Reynolds 수가 2,300~22,000의 범위에서 이루어졌으며 이는 난류영역에 해당한다. 열전달 향상 장치를 삽입하면 면적의 증가와 2차 유동으로 인하여 열전달이 향상되고, Reynolds 수가 증가할수록 열전달이 향상되었으며 압력강하도 증가하였다. 열전달 측면에서는 Rib & Dimple 모델이 열전달 향상 효과가 가장 좋았으며, 압력강하는 Chamfered rib $10^{\circ}$ 모델이 가장 낮았으며, 성능계수 측면에서도 Chamfered rib $10^{\circ}$ 모델이 가장 높은 것으로 나타났다.