• 한국신재생에너지학회:학술대회논문집
• /
• 2005.06a
• /
• pp.361-365
• /
• 2005

Since the fuel cell uses the hydrogen for its fuel. it has no emission and higher efficiency than an internal combustion engine. Also fuel cell is much quieter than engine generator and generates heat much less than engine generator. So it has advantage of Army's 'si lent watch' capability and the ability to operate undetected by the enemy. The fuel cell hybrid system combines a fuel cell power system with an ESS. The ESS (e.g., batteries or ultracapacitors) reduces the fuel cell's peak power and transient response requirements. It allows the fuel cell to operate more efficiently and recovery of vehicle energy during deceleration. The battery has high energy density, so it has the advantage regarding driving distance. However, it has a disadvantage considering dynamic characteristic because of low power density. One other hand. the ultracapacitor has higher power density, so it can handle sudden change or discharge of required power. Yet. it has lower energy density. so it will be bigger and heavier than the battery when it has the same energy. This paper proposes the power management strategy for multi-power source fuel cell hybrid system. which is applied with the merits of both battery and ultra capacitor by using both of them simultaneous.

• Applied Biological Chemistry
• /
• v.20 no.1
• /
• pp.33-42
• /
• 1977

Asparagine biosynthesis by soybean sprouts grown under the dark conditions has been demonstrated. The amount of free asparagine synthesized in ten day-old soybean sprouts increases to 22.7% on the dry weight base. The effects of nitrogen compounds such as $NH_4Cl,\;(NH_4)_2SO_4$ and urea on asparagine synthesis during the sprouting were examined and the results showed that urea was more effective than other two compounds. Glutamine-dependent asparagine synthetase was partially purified (8.6 folds) through ammonium sulfate fractionation, followed by Sephadex G-150 gel filtration. The enzyme was very labile and required protection by thiol groups or high level of glycerol. The mixture of ATP and $Mg^{++}$ ion also stabilized the enzyme activity. The enzyme utilized glutamine more effectively than ${NH_4}^+$ as an amide donor for the formation of asparagine. The enzyme required L-aspartate (Km=3.1 mM), L-glutamine, ATP and $Mg^{++}$. It showed pH optimum of 7.5 and catalyzed the formation of ${\beta}-aspartyl$ hydroxamate in the presence of L-aspartate, ATP, $Mg^{++}$ and $NH_2OH$ in the reaction mixture.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.1
• /
• pp.41-48
• /
• 2012

The purpose of this study was to assess the antioxidant activity of vegetable extracts (pumpkin, aloe, and artichoke) containing Protaetia brevitarsis (PB) and the clinical and pathological changes in ICR mice after a single oral administration. The total polyphenol (TP) and 2,2-diphenyl-1-picrylhydrazyl (DPPH) radical scavenging ability, total radical trapping antioxidant potential (TRAP), oxygen radical absorbance activity (ORAC), and single cell gel electrophoresis assay were done to measure their antioxidant activities. The effect of vegetable extracts containing PB in TP and the ORAC value was significantly higher than those without PB. In addition, all extracts had effective $DPPH{\cdot}$ scavenging and $ABTS{\cdot}+$ scavenging activities. The protective effect of vegetable extracts with/without PB on $H_2O_2$-induced DNA damage was found. In a single-dose toxicity study, mortality, body weight, physiological signs, and biochemical analysis were analyzed. Seventy mice were randomly assigned to 7 experimental groups and were administered three vegetable extracts with and without PB (2 g/kg). A full 14 days after administration, no mice mortality was observed in any group. Body weight, physiological signs, and biochemical analysis were never significantly different from those of the control group. Taken together, these findings indicate that vegetable extracts containing PB with antioxidant activities and safety could be applied as medicinal and edible resources in an industrial area.

• Journal of the Korean institute of surface engineering
• /
• v.14 no.4
• /
• pp.215-220
• /
• 1981

The surface appearance of chromium electrodeposit was studied by employing a pulse curr-ent plating in self-regulating high speed (SRHS) bath containing 20 g/$\ell$, K2SiF6 7.5 g/$\ell$ SrSO4 and 250 g/$\ell$ CrO3. As the pulse frequency increased, the surface appearance changed suddenly from bright a-ppearance in a direct current plating condition to gray one in the range of pulse frequency less than about 20KHz. However the bright appearance is recovered as the pulse frequen-cy exceeded 20 KHz. This phenomena seemed to be related with the preferred orientation of electrodeposits, considering the relationship between the preferred orientation of elect-rodeposits and surface appearance in a SRHS bath. Direct current plating was also applied to both Sargent and SRHS bath and investigat-ion on surface appearance was extended to the high current density of 400 A/dm2. In a Sa-rgent bath, the increase in bath temperature was necessary for bright appearance as the current density was increased within 150 A/dm2, but bright region was shown in the cons-tant temperature of 70-75$^{\circ}C$ above the current density of 150A/dm2. On the other hand, two regions of surface brightness was found in a SRHS bath. One is region in the low temperature less than 25$^{\circ}C$ and the other in the moderate temperature range from 55$^{\circ}C$ to 65$^{\circ}C$.

• Korean Journal of Materials Research
• /
• v.29 no.11
• /
• pp.720-726
• /
• 2019

Recently, research on cost reduction and efficiency improvement of crystalline silicon(c-Si) photovoltaic(PV) module has been conducted. In order to reduce costs, the thickness of solar cell wafers is becoming thinner. If the thickness of the wafer is reduced, cracking of wafer may occur in high temperature processes during the c-Si PV module manufacturing process. To solve this problem, a low temperature process has been proposed. Conductive paste(CP) is used for low temperature processing; it contains Sn57.6Bi0.4Ag component and can be electrically combined with solar cells and ribbons at a melting point of $150^{\circ}C$. Use of CP in the PV module manufacturing process can minimize cracks of solar cells. When CP is applied to solar cells, the output varies with the amount of CP, and so the optimum amount of CP must be found. In this paper, in order to find the optimal CP application amount, we manufactured several c-Si PV modules with different CP amounts. The amount control of CP is fixed at air pressure (500 kPa) and nozzle diameter 22G(outer diameter 0.72Ø, inner 0.42Ø) of dispenser; only speed is controlled. The c-Si PV module output is measured to analyze the difference according to the amount of CP and analyzed by optical microscope and Alpha-step. As the result, the optimum amount of CP is 0.452 ~ 0.544 g on solar cells.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.18 no.6
• /
• pp.232-236
• /
• 2008

Recently the shortage of silicon resources especially for poly-silicon of purity higher than 99.9999% leads to search for the more cheap and quick synthesizing routes for silicon feedstock. In order to solve this situation, we investigated the purification process of metallurgical grade (MG) silicon of purity around 99% by the acid leaching and following the unidirectional solidification. MG-Si lumps are pulverized with a planetary mill, and then leached with HCl/$HNO_3$/HF acid solution. As a result, the concentration of metal impurities including Al, Fe, Ca, Mn, etc. decreased dramatically. This process led to silicon content higher than 99.99%. The purified silicon powders were compacted and have been melted and uni-directionally solidified with heat exchange method (HEM) furnace. The properties of multicrystalline silicon ingots were specific resistance of $0.3{\Omega}{\cdot}cm$ and minority carrier life time (MCLT) of $3.8{\mu}{\cdot}sec$.

• Asian Journal of Atmospheric Environment
• /
• v.6 no.2
• /
• pp.83-95
• /
• 2012

China has been a top producer and exporter of refined lead products in the world since the year 2000. After the phasing-out of leaded gasoline in the late 1990s, non-ferrous metallurgy and coal combustion have been identified as potential major sources of aerosol lead in China. This paper presents the single particle analytical results of ambient aerosol particles collected near a lead smelter using a scanning electron microscopy- energy dispersive x-ray spectroscopy (SEM-EDX). Aerosol particle samples were collected over a 24-hour period, starting from 8 pm on 31 May 2002, using a high volume TSP sampler. For this near source sample, 73 particles among 377 particles analyzed (accounting for 19.4%) were lead-containing particles mixed with other species (S, Cl, K, Ca, and/or C), which probably appeared to be from a nearby lead smelter. Lead-containing particles of less than $2{\mu}m$ size in the near source sample were most frequently encountered with the relative abundances of 42%. SEM-EDX analysis of individual standard particles, such as PbO, PbS, $PbSO_4$, $PbCl_2$, and $PbCO_3$, was also performed to assist in the clear identification of lead-containing aerosol particles. Lead-containing particles were frequently associated with arsenic and zinc, indicating that the smelter had emitted those species during the non-ferrous metallurgical process. The frequently encountered particles following the lead-containing particles were mineral dust particles, such as aluminosilicates (denoted as AlSi), $SiO_2$, and $CaCO_3$. Nitrate- and sulfate-containing particles were encountered frequently in $2-4{\mu}m$ size range, and existed mostly in the forms of $Ca(NO_3,SO_4)/C$, $(Mg,Ca)SO_4/C$, and $AlSi+(NO_3,SO_4)$. Particles containing metals (e.g., Fe, Cu, and As) in this near source sample had relative abundances of approximately 10%. Although the airborne particles collected near the lead smelter contained elevated levels of lead, other types of particles, such as $CaCO_3$-containing, carbonaceous, metal-containing, nitrates, sulfates, and fly-ash particles, showed the unique signatures of samples influenced by emissions from the lead smelter.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.22 no.6
• /
• pp.41-61
• /
• 2019

The purpose of this study was carried out to present the basic data for constructing a ecological stream, Shindangcheon stream located in Gyeongju-si, Gyeongsangbuk-do, South Korea. From August 2017 to June 2019, a total of 7 surveys were conducted. The numbers of vascular plants were summarized as 388 taxa including 75 families, 246 genera, 360 species, 4 subspecies, 19 varieties, 2 forms and 3 hybrids. The most families of taxa were Poaceae (59 taxa), Asteraceae (47 taxa), Fabaceae (27 taxa), Rosaceae and Cyperaceae (20 taxa, respectively), and Polygonaceae and Brassicaceae (15 taxa, respectively). The rare plant was Aristolochia contorta Bunge, and the Korean endemic plants were 4 taxa, such as Populus × tomentiglandulosa T.B.Lee, Salix koriyanagi Kimura ex Goerz, Lespedeza maritima Nakai, and Weigela subsessilis (Nakai) L.H.Bailey. The specific plants by floristic region found in this site were 13 taxa comprising 8 taxa of grade I, 4 taxa of grade III, and 1 taxon of grade IV. The naturalized plants were 73 taxa, such as Fallopia dumetorum (L.) Holub, Persicaria orientalis (L.) Spach., Potentilla supina L. var. ternata Pterm., and so forth. The invasive alien plants were 6 taxa, such as Rumex acetosella L., Sicyos angulatus L., Solanum carolinense L., Ambrosia artemisiifolia L., Lactuca serriola L., and Symphyotrichum pilosum (Willd.) G.L.Nesom..

• Journal of ILASS-Korea
• /
• v.19 no.1
• /
• pp.9-14
• /
• 2014

Performance of DI diesel engine with high-pressure fuel injection equipment is directly related to its emission characteristics and fuel consumption. So, the electro-hydraulic injector for the common-rail injection system should be designed to meet the precise high fuel delivery control capability. Currently, most high pressure injector in use has a needle driven by the solenoid coil energy or the piezo actuator controlled by charge-discharge of output pulse current. In this study, macroscopic spray approaching method was applied under constant volume chamber to research the performance of three different injectors : solenoid, indirect-acting piezo and direct-acting piezo type for CR direct-injection. LED back illumination for Mie scattering was applied on the liquid spray visible of direct-acting piezo injector, including hydraulic-servo type solenoid and piezo-driven injectors. As main results, we found that a direct-acting piezo injector had better a spray tip penetration than hydraulic-servo injectors in spray visualization.

• Proceedings of the KIEE Conference
• /
• 2003.07c
• /
• pp.1496-1498
• /
• 2003

The $(Sr_{0.85}Ca_{0.15})TiO_3$(SCT) thin films were deposited on Pt-coated electrode (Pt/TiN/$SiO_2$/Si) using RF sputtering method according to the deposition condition. The optimum conditions of RF power and Ar/$O_2$ ratio were 140[W] and 80/20, respectively. Deposition rate of SCT thin films was about 18.75[${\AA}/min$] at the optimum condition. The capacitance characteristics had a stable value within ${\pm}4[%]$. The drastic decrease of dielectric constant and increase of dielectric loss in SCT thin films were observed above 200[kHz].