• 한국수산과학회지
• /
• 제28권1호
• /
• pp.80-86
• /
• 1995

1991년 6월 7일-8일, 1992년 6월 25일-26일까지 약 2일 동안 대기중의 background 농도값을 알아보기 위하여 비오염 지역인 독도 정상에서 기상요소와 함께 가스 성분 $(SO_2,\;CO,\;NO_2,\;O_3)$ 및 입자성분을 채취하여 이를 분석하고, 또한 에어로졸의 형상과 성분 분석을 실시한 결과를 요약하면 다음과 같다. 1) 독도의 기상상태는 대체적으로 습도가 높은 해안지방의 특성을 가졌으며, 독도 정상 (해발 98m)에서의 대기 중의 시료 채취 결과, 가스상 물질인 $SO_2,\;CO,\;NO_2$ 및 $O_3$의 평균 농도 값은 대기 환경기준치에 크게 미달되는 2.3ppb, 5.57ppm, 6ppb 및 7ppb로써 상당히 좋은 대기질로 판단된다. 2) 부유입자상 물질의 농도 값은 $153{\mu}g/m^3$으로써 년평균값의 환경기준치보다 약간 상회하였지만 그 성분 분석결과, 대부분 입경이 크고 ($1{\mu}m$이상) Na, Cl과 같은 해염성분이 우세하였다. 따라서 대기 입자상 물질의 환경기준치 설정시 그 성분분석도 함께 고려되어야만 할 것으로 사료된다. 3) 독도는 해양에서의 대기질 평가를 위한 지점으로써 뿐만 아니라 기상학적 관측 자료를 얻기 위한 주요한 고정 관측점으로써도 이용될 수 있을 것으로 사료된다.

• 콘크리트학회지
• /
• 제9권3호
• /
• pp.119-126
• /
• 1997

최근 건설용 골재의 소비량이 증가하여 쇄석골재의 수요량이 급격히 늘어남에 따라 , 광산 현장에 적치 되어 있는 폐석을 효율적으로 활용하기 위한 연구가 활발히 진행되고 있다. 이 연구의 목적은 강원도삼화 지역에 분포하는 쇄석 골재용 석회암을 대상으로 암석 기재학적 화학적, 역학적 특성을 구명하여 건설용 골재로서의 적합성을 알아보고, 또한 부가가치가 높은 건설자재와 첨단산업소재 제품 개발의 원료로 활용할 수 있는 기초자료를 제공하는데 있다. 삼화지역에 분포하는 쇄석골재용 석회암은 크게 담회색의 세립질 석회암과 담갈색의 조립질 석회암으로 구분할 수 있었으며, 이중 양적으로 우세한 세립질 석회암은 돌로마이트가 함유되어 있어 MgO와 $SiO_2$의 함량이 높게 나타났고, 물성 및 역학적 특성을 고려할 때 보통암에 해당된다. 따라서 연구 지역의 쇄석골재용 석회암은 구성광물과 입자들의 크기 및 화학성분 등을 고려할 때, 대체로 시멘트 콘크리트용보다는 아스팔트 콘크리트용이나 도로 포장용 또는 철도용으로 이용하는 것이 더 좋을 것으로 판단된다.

• 한국환경과학회지
• /
• 제25권10호
• /
• pp.1381-1387
• /
• 2016

This study aims to establish baseline data for sustainable monitoring by applying the green city index (GCI), which is set up to evaluate the city level, to the city of Gangneung-si, which was designated as a pilot city for the Low-carbon Green Growth City project by the Ministry of Land, Infrastructure, and Transportation. The GCI was applied in the framework of European systems, while considering the social and economic status of Korea. Indicators from 7 areas-$CO_2$, energy, building, transportation, water, waste, and quality of atmosphere were analyzed, except for qualitative indicators. Results indicate that total $CO_2$ emissions were 30.8 tons per capita, or 2.2 tons per one million units of real GDP. The total final energy consumption was 0.231 TOE/capita, or 0.317 TOE per one million units of real GDP. The percentage of total energy derived from renewable resources was 0.41% and energy consumption by the building was $433.5Mwh/1,000m^2$. The total percentage of the working population travelling to work daily by public transportation (limited to bus) was 19%. Further, the total annual water consumption was $99m^3/capita$, and the water lost in the water distribution system was $0.057m^3/capita/day$. The total annual waste collected was 0.0077 ton per capita, The annual mean emission were 0.014 ppm/day for $NO_2$, 0.005 ppm/day for $SO_2$, and 0.019 ppm/day for $O_3$. The annual mean for PM10 emissions was $39{\mu}g/m^3/day$.

• 융합보안논문지
• /
• 제17권2호
• /
• pp.119-126
• /
• 2017

드라마는 가장 인기 있는 방송프로그램 장르 중 하나로서 일반적으로 십 수편의 분량으로 구성되어 시간의 흐름에 따라 등장 캐릭터의 지위, 신분, 상호간 관계가 변하고 드라마 내용 이해에 중요한 역할을 하는 행위들이 산발적으로 발생하는 특징을 갖고 있다. 이런 특징으로 인해 드라마 중간에 몇 편을 누락하는 경우 내용 이해에 곤란을 겪게 되고 심지어 드라마 시청을 포기하는 경우가 발생하기도 한다. 이 에, 본 논문은 이와 같은 드라마 시청자들의 문제를 해결하고자 하는 데이터 서비스 개발에 가이드가 될 수 있도록 가상의 드라마 연동 데이터 서비스의 기능과 사용자인터페이스를 설계하고 드라마 내용 이해에 필요한 캐릭터 정보를 데이터 서비스에 전달할 수 있는 방법을 설계하였다. 가상의 데이터 서비스는 드라마 시청의 집중도를 최대한 방해하지 않기 위해 드라마 장면 별로 그 장면에 등장하는 캐릭터들만의 정보를 제공하는 특징을 갖고 있으며 데이터 서비스에 캐릭터 정보를 전달하는 방식은 디지털방송 국제표준인 DVB-SI를 기반으로 한다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 추계학술대회 초록집
• /
• pp.43.2-43.2
• /
• 2010

In this study, metallurgical grade (MG) silicon with 99% purity produced by arc furnace process was systematically investigated for slag refining. The most problematic impurities to remove from MG silicon are boron (B) and phosphorus (P). To remove B and P from MG-silicon, we used synthetic slag in the molten state. MG-silicon with synthetic slag of CaO, $SiO_2$, and $CaF_2$ was melted using by high-frequency induction furnace with electrical output of 50kW. Specimens prepared by various refining process conditions(holding time, mixture ratio) were inspected by combined analysis of ICP-MS and XRF. With this approach, B has been reduced to <5ppm, P to <1ppm and other impurities to 0.1~0.2% except for Calcium. Calcium has been increased from 17ppm to 1500ppm. Problem of calcium contamination will be resolved by additional refining processes.

• 복식문화연구
• /
• 제6권2호
• /
• pp.22-35
• /
• 1998

The objective of this study was to investigate and to identify and to classify the fabric names concerning costume in the sumptuary laws of Silla in Sam Guk Sa Ki(三國史記). The important findings of this study can be summarized as follows: Various names of fabrics concerning costume in the sumptuary laws of Silla were found to be classified into ten categories of fabrics. They were as follows: (1) kye( ), (2) Su(繡), (3) Kum(錦), (4) Ra(羅), (5) Reung(綾), (6) Sa(紗), (7) Si( ), (8) Kyun(絹), (9) Myun Ju(綿紬), (10) Po(布). Ra(羅) in ten categories was the most various. The numbering orders shown above were the orders of degree of valuability and preciousness of the fabrics in Silla. Namely, (1) Kye( ) was the most precious fabric, (2) Su(繡) was the second precious one, (3) Kum(錦) was the third precious one, and so on. It was found that the orders of the degree of preciousness of fabrics were a system for differentiating social class and rank, or sex of the people. It revealed the ordering system of the degree of the preciousness of fabrics of Silla was derived from T'ang dynasty. The system of Silla and T'ang system were almost the same each other. Materials used to manufacture fabrics were of mainly three kinds; e.g., wool, silk, and hemp. In these three kinds of materials silk was the most common stuff, and it was seen under the various names of the silks.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 추계학술대회 논문집 학회본부 C
• /
• pp.1065-1068
• /
• 1998

On the study, The activated carbon assemblies(ACA) were prepared by activation of the coated glass mate(woven type) with phenolic resin at $700^{\circ}C$ under $N_2$ after drying and curing processes. Surface of the ACA was continuously modified with $N_2$, $CO_2$ or $NH_3$ at $700^{\circ}C$ for 2 hour for comparison of adsorptive characteristics between the ACA and commercial activated carbon cloth. The ACA showed high surface areas up to $2440\;m^2/g$ when converted into the coated carbon base, and the surface was investigated by FT-IR and XPS. The basic ACA modified with $NH_3$ displayed the efficient removal capability of $SO_2$, which is 75% of that in commercial activated carbon cloth. Therefore, it has proved the applicability of ACA as an inexpensive materials for Dry de-SOX system.

• 소성∙가공
• /
• 제15권8호
• /
• pp.603-608
• /
• 2006

The main purpose of the present study has been placed on investigating the mechanical properties and microstructures of C-Si-Mn-V steels for cold forming manufactured by controlled rolling and cooling technology. The steels were manufactured in electric arc furnace (EAF) and casted to $160{\times}160mm$ billet. The billets were reheated in walking beam furnace and rolled to coil, the stocks were rolled by Controlled Rolling and Cooling Technology (CRCT), so rolled at low temperature by water spraying applied in rolling stage and acceleratly cooled before coiling. Rolled coils were cold drawed to the degree of 16%, 27% of area reduction respectively without heat treatment. Microstructual observation, tensile test, compression test and charpy impact tests were conducted. The mechanical properties of the steels were changed by area reduction of cold drawing and it is founded that there are optimum level of cold drawing to minimize compression stress for these steels. From the result of this study, it is conformed that $80kg_{f}/mm^{2},\;90kg_{f}/mm^{2}$ grade high strength microalloyed steel for cold forming are developed by accelerated cooling and optimum cold drawing.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 추계학술대회 논문집 학회본부 B
• /
• pp.717-720
• /
• 1998

On the study, The activated carbon assemblies(ACA) were prepared by activation of the coated glass mat(woven type) with phenolic resin at $700^{\circ}C$ under $N_2$ after drying and curing processes. Surface of the ACA was continuously modified with $N_2$, $CO_2$ or $NH_3$ at $700^{\circ}C$ for 2 hour for comparison of adsorptive characteristics between the ACA and commercial activated carbon cloth. The ACA showed high surface areas up to $2440\;m^2/g$ when converted into the coated carbon base, and the surface was investigated by FT-IR and XPS. The basic ACA modified with $NH_3$ displayed the efficient removal capability of $SO_2$, which is 75% of that in commercial activated carbon cloth. Therefore, it has proved the applicability of ACA as an inexpensive materials for Dry de-SOX system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 추계학술대회 논문집 학회본부A
• /
• pp.397-400
• /
• 1998

On the study, The activated carbon assemblies(ACA) were prepared by activation of the coated glass mat(woven type) with phenolic resin at $700^{\circ}C$ under $N_2$ after drying and curing processes. Surface of the ACA was continuously modified with $N_2$, $CO_2$ or $NH_3$ at $700^{\circ}C$ for 2 hour for comparison of adsorptive characteristics between the ACA and commercial activated carbon cloth. The ACA showed high surface areas up to $2440\;m^2$/g when converted into the coated carbon base, and the surface was investigated by FT-IR and XPS. The basic ACA modified with $NH_3$ displayed the efficient removal capability of $SO_2$, which is 75% of that in commercial activated carbon cloth. Therefore, it has proved the applicability of ACA as an inexpensive materials for Dry de-SOX system.