• Plant Journal
• /
• v.10 no.3
• /
• pp.45-51
• /
• 2014

This study performs several experiments on a newly developed temperature safety system that can be used for residential building heating systems, the heat source of which is derived from a conventional fuel cell. Prior to this, the hot water made from a fuel cell was not used in residential housing but just went to waste. The present safety system is installed in the current underfloor heating system. At first we used the CFD technique to develop a new heat exchanger. The fuel cell must satisfy the thermal conditions of the inlet temperature being $55^{\circ}C$ and the outlet temperature being $60^{\circ}C$. But variations in weather cause fluctuations in the heating water temperature. The experimental results show our new system capable of maintaining the temperature difference within a ${\pm}0.5^{\circ}C$ range. So we believe that our new PFMFC fuel cell stack array is a good candidate for being used in residential heating systems.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2013.05a
• /
• pp.383-384
• /
• 2013

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.05a
• /
• pp.355-356
• /
• 2010

• The Magazine of the IEIE
• /
• v.31 no.8
• /
• pp.44-51
• /
• 2004

최근 SoC (System on Chip) 기술의 발전으로 최대 10 Gbps의 처리율을 갖는 네트워크 프로세서가 개발되고 있다. 네트워크 프로세서는 기존의 ASIC (Application Specific Integrated circuit)또는 FPGA (Field Programmable Gate Array) 등 하드웨어가 수행하던 고속의 패킷 처리 기능을 소프트웨어 기반으로 처리하도록 함으로써 다양한 기능의 패킷 처리를 저비용으로 단시간 내에 개발 할 수 있는 장점을 갖고 있다.(중략)

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.18 no.4
• /
• pp.47-54
• /
• 2022

In this paper, MEMS embedded system design implemented the sensor events via analyzing the characteristics that dynamically happened to an abnormal status in power IoT environments in order to guarantee a maintainable operation. We used three kinds of tools in this paper, at first Bluetooth Low Energy (BLE) technology which is a suitable protocol that provides a low data rate, low power consumption, and low-cost sensor applications. Secondly LSM6DSOX, a system-in-module containing a 3-axis digital accelerometer and gyroscope with low-power features for optimal motion. Thirdly BM1422AGMV Digital Magnetometer IC, a 3-axis magnetic sensor with an I2C interface and a magnetic measurable range of ±120 uT, which incorporates magneto-impedance elements to detect the magnetic field when the current flowed in the power devices. The proposed MEMS system was developed based on an nRF5340 System on Chip (SoC), previously compared to the standalone embedded system without bluetooth technology via mobile App. And also, MEMS embedded system with BLE 5.0 technology broadcasted the MEMS system status to Android mobile server. The experiment results enhanced the performance of MEMS system design by combination of sensors, BLE technology and mobile application.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.10
• /
• pp.841-851
• /
• 2013

Mobile RFID/NFC linkage technology means a provision of integrated 2 existing mobile RFID services by developing the 900MHz mobile RFID reader and the NFC reader/tag into one SoC to be put on a USIM card. In this paper, the mobile RFID related technologies that offer similar services as NFC were also analyzed to understand the potential linkage to NFC and the requirements for the linkage. In addition, the introduction of dual tag and the code system linkage suggested a linking method to maximally use the existing infrastructure and the requirement satisfaction was analyzed. Lastly, based on the analysis, the future direction for the new standard design was suggested.

• International Commerce and Information Review
• /
• v.10 no.2
• /
• pp.283-304
• /
• 2008

According to globalization and localization of world economics international trade payment method was also changed. A traditional payment was Letter of Credit basis, however it is being increased to various methods such as remittance, documentary collection(D/P, D/A) and open account. In order to acquire a secure export payment, exporters prefer to L/C basis which is guaranteed by a reliable bank. However, the L/C should bear a security so that importers would rather documentary collection than L/C. The reasons for the preference of collection payment rather than L/C are a low commission cost, the conversion of buyer's market from seller's market due to severe competition in the world market, transaction increase between main office and branches and a right to control the goods until executing the payment by exporters. Besides of them, collection payment can handle safer and faster than open account basis. However, the collection payment has a risk which it isn't guaranteed by bank for the payment so that I would suggest countermeasures to minimize the payment risk utilizing the collection basis as follows; using export credit insurance system, a large domestic credit report provider such as D&B for absolutely fresh and new information, a collection proxy service for overseas deferred credit and suggestion specifying to order B/L not straight one on consignee in order to transfer the right of ownership with endorsement without problem.

• The KIPS Transactions:PartD
• /
• v.14D no.4 s.114
• /
• pp.389-394
• /
• 2007

This study suggests that it dynamically generates semantic Web services from Java and C++ components in order to supporting semantic Web service by using ontology. And the semantic Web should enable greater access not only to content but also to services on the Web. It needs semantic service discovery for components. So, we add ontology-based framework to Web service generation system from components. Especially, components and ontologies are transformed UML model so that it makes WSDL documents to support a generation of dynamic Web service using object modeling. The main contribution of this study is to generate web service dynamically from components and to support semantic Web environment by using ontology. In other words, this study integrates semantic Web service based on ontology and CBD method.

• Journal of Power System Engineering
• /
• v.17 no.6
• /
• pp.79-87
• /
• 2013

The improvement of cooling efficiency for the cabinet of automatic controller is the most efficient method of it's application. Therefore, this study has been analyzed and investigated the improvement of cooling efficiency and reduction of energy for the cabinet of automatic controller, respectively. So this study was conducted to enhancement of cooling efficiency for the cabinet of automatic controller by making a structure which produces difference of air pressures in the entrance tube of external air. And the structure has capacity of the pyrogen source (PTC elements) to make temperature range from $145^{\circ}C$ to $155^{\circ}C$. Consequently, temperatures of the upper, the lower in the interior of the cabinet of automatic controller and the exhaust part were revealed $28.57^{\circ}C$, $23.38^{\circ}C$and $36.14^{\circ}C$(average temperature of the exhaust part in case of existing method : $45^{\circ}C$) in target test of this study, respectively. It was found that the cabinet of the automatic controller has better cooling ability than the cabinet of automatic controller by using an existing method.

• International conference on construction engineering and project management
• /
• 2024.07a
• /
• pp.85-92
• /
• 2024

Reinforced concrete modular integrated construction (MiC) has been widely used in Hong Kong nowadays, but the solutions for temporary tying of the side walls during the construction of the composite wall have still shortcomings. Based on a MiC project in Hong Kong, this paper proposes a new inner tie system for composite wall. The system components are installed on the side walls of precast modules without penetrating through the side walls. After the loop is rotated to contact the hook, the tying effect can be generated when the concrete is poured on site between the middle gap of two modules. This system replaces tie bolts penetrating through precast side walls, so that the modules' interior fitting-out can be fully completed in factory and the on-site construction has no adverse effects on the internal decoration. This paper mainly describes the mechanism of the system, FEA simulation and optimization of the member size, as well as tensile and punching shear tests to verify the reliability, safety and to get more information about failure mode of the system. The system will be further examined by assembling 1:1 mockup modules, and finally applied to a real MiC project soon. The system can also act as permanent tie bars for the composite wall to reduce the total wall thickness, save the structural cost and increase the usable area. Compared with other existing tying methods in the industry, the system is easy to install, reliable to take loads, adaptable to large construction errors, and has the potential to be widely used in future practical projects.