• 한국CDE학회논문집
• /
• 제11권1호
• /
• pp.49-56
• /
• 2006

In this study, the modeling support system was developed which can make easy and fast FE-modeling and verify the results of static and durability analysis for the lower arm, one of the important parts in automobile suspension module. It took into account of the whole complicated design processes verifying the durability coefficients evaluated by fatigue analysis, which should be used to satisfy a design criteria. To guide the FE-modeling the drive page was constructed by using HTML and XML, which was based on expert's know-hows. It is able to integrate the processes to design the lower arm in practice, so that the standardization of its FE-Modeling is achieved, consequently. The 3 dimensional CAD's geometrical data were changed automatically into pre-defined shell elements under the concept of mesh-offset technique, and then welding elements were treated to connect between target and basic surfaces constructed by the shell elements. This system has also a user interface to control boundary and load ing conditions applied in performing of the static and durability analysis, in which many load cases can be applied simply with the MPCs driven by just few mouse clicks. These were implemented on the platform of MSC.Patran and utilized ANSYS, MSC.Nastran and MSC.Fatigue as the solver of the analysis performed. The developed system brings not only significant decreasing of man-hours required in FE-modeling process, but also obtaining of satisfied qualities in analyzed results. It will be integrated in a part of virtual prototyping module of the developing e-engineering framework.

• 한국국방경영분석학회지
• /
• 제36권3호
• /
• pp.95-111
• /
• 2010

NCO(Network Centric Operation) 효과분석과 관련된 요소 및 이들 간 관계는 PCO(Platform Centric Operation)의 그것과 비교하여 복잡하다. 그러나 기존 효과분석모델은 단위 효과요소관점의 효과분석방법을 제시하여, 복잡한 NCO의 효과분석을 위해서는 엔터프라이즈 관점의 통합된 효과분석과 공통언어로 활용 가능한 효과분석모델 개발이 시급한 상태다. EA(Enterprise Architecture)는 공통언어 가능의 참조모델과 이에 순응하는 적용모델 개념을 도입하여 엔터프라이즈의 변화와 복잡도를 관리한다. 본 연구는 EA의 특성인 참조 및 적용모델 개념을 도입한 '참조모델기반 NCO 효과분석모델 개발방법'을 제시한다. 이를 위해 첫째 참조 및 적용모델 개념을 가진 EA를 연구하며, 둘째, NCO 및 C2 효과분석 절차 몇 모델 분석과 모델 구성요소 식별과 관계설정을 위한 방법을 연구하며, 셋째, 연구된 내용을 바탕으로 참조모델기반 NCO 효과분석모델 개발방법을 제시하고, 마지막으로 제시된 방법에 따라 사례를 개발하여 제시한 방법의 효과성을 입증한다.

• 한국전자통신학회논문지
• /
• 제14권6호
• /
• pp.1257-1264
• /
• 2019

기존의 Cuff 기반의 혈압(Blood Pressure)측정 방법은 연속적인 실시간 혈압측정에는 한계를 갖는다. 이러한 이유로 ECG와 PPG 센서 신호를 상호융합한 다양한 혈압추정이 이루어졌다. 그러나 PPG 중심에 측정기법은 AC 노이즈, 작은 맥동, 비박동 등의 많은 문제를 지니고 있다. 본 논문은 ECG와 PPG 관계에 발생하는 맥파전달시간(PTT)과 맥파속도(PWV)를 이용하여 혈압을 추론기법이다. 신호 피크를 이용하는 HRF(Height Ratio Features)에 비해, 본 제안방식은 ECG, PPG의 최고점 혹은 최저점을 사용한 시차를 이용해 추정하기 때문에 PPG 센싱 시그널의 오류에도 안정적인 추출이 가능한 장점이 있다. 본 논문에서 제안 방법을 이용하여 25만 회의 혈압측정의 결과 ±28.5%의 정확도를 갖는 혈압 추정기법을 제시할 수 있었다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2004년도 Proceedings of ISRS 2004
• /
• pp.182-183
• /
• 2004

Atmospheric carbon monoxide (CO) and ozone $(O_3)$ play the important trace gases in tropospheric chemistry, through its concentration in the troposphere directly influences the concentrations of tropospheric hydroxyl (OH). Understanding the impact of CO and $O_3$ on the global tropospheric chemistry requires measurements of the global atmospheric CO and $O_3$ distributions. This study focuses on the identification of CO and O3 released in the East Asia between March 2000 and February 2004. During the period, the MOPITT instrument onboard the Earth Observing System (EOS)-Terra platform collected extensive measurement of CO. So we have used MOPITT data at 700hPa to analyze seasonal distribution of CO concentration. And the O3 measurements for this study were Total Ozone Mapping Spectrometer (TOMS) and Dobson spectrometer provided NASA/GSFC and Yonsei University, Korea. During springtime, the CO and O3 concentrations were increased over East Asia for April, May, and June. CO and O3 transport and chemistry in the springtime in East Asia are studied by use of the HYbrid Single Particle Lagrangian Integrated Trajectory (HYSPLIT) model.

• 한국재료학회지
• /
• 제27권11호
• /
• pp.590-596
• /
• 2017

We demonstrated a CNT synaptic transistor by integrating 6,6-phenyl-C61 butyric acid methyl ester(PCBM) molecules as charge storage molecules in a polyimide(PI) dielectric layer with carbon nanotubes(CNTs) for the transistor channel. Specifically, we fabricated and compared three different kinds of CNT-based synaptic transistors: a control device with $Al_2O_3/PI$, a single PCBM device with $Al_2O_3/PI:PCBM$(0.1 wt%), and a double PCBM device with $Al_2O_3/PI:PCBM$(0.1 wt%)/PI:PCBM(0.05 wt%). Statistically, essential device parameters such as Off and On currents, On/Off ratio, device yield, and long-term retention stability for the three kinds of transistor devices were extracted and compared. Notably, the double PCBM device exhibited the most excellent memory transistor behavior. Pulse response properties with postsynaptic dynamic current were also evaluated. Among all of the testing devices, double PCBM device consumed such low power for stand-by and its peak current ratio was so large that the postsynaptic current was also reliably and repeatedly generated. Postsynaptic hole currents through the CNT channel can be generated by electrons trapped in the PCBM molecules and last for a relatively short time(~ hundreds of msec). Under one certain testing configuration, the electrons trapped in the PCBM can also be preserved in a nonvolatile manner for a long-term period. Its integrated platform with extremely low stand-by power should pave a promising road toward next-generation neuromorphic systems, which would emulate the brain power of 20 W.

• Smart Structures and Systems
• /
• 제22권2호
• /
• pp.161-166
• /
• 2018

In the last decade, there has been an exponential increase of scientific interest in smart additive manufacturing (AM) technology. Among the different AM techniques, one of the most commonly applied processes is digital light processing (DLP). DLP uses a digital projector screen to flash an ultraviolet light which cures photopolymer resins. The resin is cured to form a solid to produce parts with precise high dimensional accuracy. During the curing process, there are several process parameters that need to be optimized. Among these, the exposure time affects the quality of the 3D printed specimen such as mechanical strength and dimensional accuracy. This study examines optimal exposure times and their impact on printed part. It was found that there is optimal exposure time for printed part to have appropriate mechanical strength and accurate dimensions. The gel fraction and TGA test results confirmed that the improvement of mechanical properties with the increasing UV exposure time was due to the increase of crosslinked network formation with UV exposure time in acrylic resins. In addition, gel fraction and thermogravimetric analysis were employed to microscopically investigate how this process parameter impacts mechanical performance.

• 약학회지
• /
• 제36권3호
• /
• pp.212-219
• /
• 1992

Although oral route is the most convenient route for drug administration, the short and variable transit of drug through GI tract restricts the sustained drug absorption after oral administration. Thus, for sustained absorption of drugs, it is desirable to prolong the GI transit time by retaining the dosage forms in the stomach. In this study, the enzyme-digestible swelling hydrogel was synthesized by heating the mixed solution of N-vinyl-2-pyrrolidone[monomer], acrylated albumin[crosslinking agent] and proxyphylline[drug] at $65^{\circ}C$ for 10 hours in the cylindrical test tube. The resultant hydrogel tablet (diameter; 0.77 cm, thickness; 0.47 cm) was designed to swell in the gastric fluid after oral administration to such a size that passing through the pylorus could be inhibited during the drug release. After releasing drug, the hydrogel was expected to be degraded by pepsin, an enzyme in the stomach, and eventually solubilized. Actually, the hydrogel synthesized in the study swelled to a size larger than the diameter of the pylorus ($1.3{\pm}0.7$ cm) and slowly digested in the presence of pepsin. Drug release from the hydrogel was prolonged up to about 12 hours. The swelling kinetics was dependent on albumin acrylation time, drug content and gel thickness. Particularly the gel thickness was the most important factor that influences on drug release. By adjusting these factors, the albumin-crosslinked hydrogel was expected to be retained in the stomach for up to 60 hours and used as a potential platform of drugs for long-term GI absorption.

• 한국전자통신학회논문지
• /
• 제13권2호
• /
• pp.313-320
• /
• 2018

자동차의 자율주행 기술이 확대되면서 '눈'의 역할을 하는 센서가 점차 중요시되고 있다. 최근 차량에 장착되는 라이다 센서는 채널이 많을수록 피사체에 반사된 신호 또한 풍부해짐에 따라 장애물, 지형, 차량 등 주변 환경 탐색의 정확도가 높아진다. 하지만, 라이다 센서는 채널 증가에 따른 열배 이상 가격의 차이가 있으며, 이러한 가격적인 문제로 보급형 차량보다는 고가의 차량에만 부분적으로 사용되고 있다. 본 연구는 저 가격의 16 채널의 라이다를 복수개로 구성하여 동시에 신호를 수집 처리하여 하나의 입체공간으로 융합하고 이를 나타낼 수 있게 함으로써 64 채널의 라이더와 같은 효과를 나타낼 수 있게 하였다. 이를 통해서 차량 심미성의 개선과 함께 보급화를 위한 기반을 제공할 수 있다.

• 한국전자통신학회논문지
• /
• 제13권5호
• /
• pp.1037-1042
• /
• 2018

최근 인간의 뇌를 모방하여 정보를 학습하고 처리하는 뉴로모픽 기술에 대한 연구는 꾸준히 진행되고 있다. 뉴로모픽 시스템의 하드웨어 구현은 다수의 간단한 연산절차와 고도의 병렬처리 구조로 구성이 가능하여, 처리속도, 전력소비, 저 복잡도 구현 측면에서 상당한 이점을 가진다. 또한 저 전력, 소형 임베디드 시스템에 적용 가능한 뉴로모픽 기술에 대한 연구가 급증하고 있으며, 정확도 손실 없이 저 복잡도 구현을 위해서는 입력데이터의 차원축소 기술이 필수적이다. 본 논문은 멀티모달 센서 데이터를 처리하기 위해 멀티모달 센서 시스템, 다수의 뉴론 엔진, 뉴론 엔진 컨트롤러 등으로 구성된 경량 인공지능 엔진과 특징추출기를 설계 하였으며, 이를 위한 병렬 뉴론 엔진 구조를 제안하였다. 설계한 인공지능 엔진, 특징 추출기, Micro Controller Unit(MCU)를 연동하여 제안한 경량 인공지능 엔진의 성능 검증을 진행하였다.

• Ocean Systems Engineering
• /
• 제5권3호
• /
• pp.139-160
• /
• 2015

The global performance of the 5MW OC4 semisubmersible floating wind turbine in random waves was numerically simulated by using the turbine-floater-mooring fully coupled and time-domain dynamic analysis program FAST-CHARM3D. There have been many papers regarding floating offshore wind turbines but the effects of second-order wave-body interactions on their global performance have rarely been studied. The second-order wave forces are actually small compared to the first-order wave forces, but its effect cannot be ignored when the natural frequencies of a floating system are outside the wave-frequency range. In the case of semi-submersible platform, second-order difference-frequency wave-diffraction forces and moments become important since surge/sway and pitch/roll natural frequencies are lower than those of typical incident waves. The computational effort related to the full second-order diffraction calculation is typically very heavy, so in many cases, the simplified approach called Newman's approximation or first-order-wave-force-only are used. However, it needs to be justified against more complete solutions with full QTF (quadratic transfer function), which is a main subject of the present study. The numerically simulated results for the 5MW OC4 semisubmersible floating wind turbine by FAST-CHARM3D are also extensively compared with the DeepCWind model test results by Technip/NREL/UMaine. The predicted motions and mooring tensions for two white-noise input-wave spectra agree well against the measure values. In this paper, the numerical static-offset and free-decay tests are also conducted to verify the system stiffness, damping, and natural frequencies against the experimental results. They also agree well to verify that the dynamic system modeling is correct to the details. The performance of the simplified approaches instead of using the full QTF are also tested.