• Journal of Veterinary Clinics
• /
• v.18 no.2
• /
• pp.185-188
• /
• 2001

A weakened wild feral pig (a boar of about 15 kg) with snout distortion and characteristic external lesion of infectious atrophic rhinitis was captured at farm land near low mountains in Chinju, Kyeongnam province. This pig was necropsied and then the snout parts and the parenchymal organs were removed. The snout and nose were transversely sectioned at thickness of 1.5 cm interval. Grossly, the right side of the snout was shorted than that of left by reduction of right nasal turbinate length, but the nasal opening exudate was not observed. At necropsy, degeneration, adhesion, occlusion, and asymmetry of left and right sides on the meatus and turbinate were observed and findings of mild pneumonia were observed. Microscopically, the leukocyte infiltration, hyperemia and hyperplasia on the mucosa of the turbinates and septum were observed. The atrophied periosteum and osseous tissue were also observed. But Bordetella bronchiseptica was not identified in culture from nasal swabs. We expect the possibility that the snout distortion of this pig was due to infectious atrophic rhinitis according to these findings.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.23 no.10
• /
• pp.1265-1273
• /
• 1999

PIV(Particle Image Velocimetry) velocity field measurements inside the snout of a1/10 scale model of the Zn plating process were carried out at the strip speed $V_s=1.5m/s$. Aluminum powder particles ($1{\mu}m$) and atomized olive oil ($3{\mu}m$) were used as seeding particles to simulate the molten Zinc flow and deoxidization gas flow, respectively. A pulsed Nd:Yag laser and a $2K{\times}2K$ high-resolution CCD camera were synchronized for the PIV velocity field measurement. From flow visualization study, it is found that the liquid flow in the Zn pot is dominantly governed by the uprising flow caused by the rotating sink roll, with its effect on the steel strip inside the snout largely diminished by installing of the snout. The deoxidization gas flow in front of the strip inside the snout can be characterized by a large-scale vortex rotating clockwise direction formed by the moving strip. In the rear side of the strip, a counter-clockwise vortex is formed and some of the flow entrained by the moving strip impinges on the free surface of molten zinc. The liquid flow in front of the strip is governed by the flow entering the snout, caused by the spinning sink roll. Just below the free surface a counter-clockwise vortex is formed near the snout wall. The moving strip affects dominantly the flow behind the strip inside the snout, and large amount of the liquid flow follows the moving strip toward the sink roll. The thickness of the flow following the strip is very thin in the front side due to the uprising flow, however thick boundary layer is formed in the rear side of the strip. Its thickness is increased as moving downstream toward the sink roll. Inside the snout, the deoxidization gas flow above the free surface is much faster than the liquid flow in the zinc pot. Due to the larger influx of the flow following the moving strip in the rear side of the strip, higher percentage of imperfection can be anticipated on the rear surface of the strip.

• The korean journal of orthodontics
• /
• v.9 no.1
• /
• pp.23-35
• /
• 1979

The present study has the purpose of investigating various growth and developmental aspects of rabbit snout with the aid of metallic implantation and of improving on the indirect method of growth and developmental studies of its skull. Sixty-eight growing albino rabbits were used. A head holder, film holder, cephalometer, metallic implanting device and implant materials were designed and constructed by the author. Eight metallic pins were implanted with a metallic implanting device in the rabbit snout under general anesthesia. Two metallic pins were implanted on each side of the interfrontal suture and another two were put on each side of the internasal suture near the frontonasal suture. Serial cephalograms were taken with a two-week interval, using the head holder, film holder and cephalometer. Eight items of linear measurement were obtained from the film. On the base of the results of the study, the following conclusions are obtained: 1. The metallic implant method is better than the other indirect methods for growth and developmental studies of the rabbit skull. 2. Most of the vertical growth of the rabbit snout is due to sutural growth at the frontonasal suture and the horizontal growth is at the interfrontal and the internasal suture. 3. The vertical growth of the rabbit snout is greater than the horizontal growth. 4. The horizontal growth of the rabbit snout is greater at the nasal bone than at the frontal bone. 5. The amount of vertical growth of the rabbit snout is almost same at inner and outer side of the interfrontal and internasal suture line, 6. Growth rate of the sutural growth of the rabbit snout tends to decrease by the growth of the rabbit. 7. Implant materials do not disturb growth and development of the rabbit snout, except a slight trauma effect during the first week of metallic implantation.

• The Journal of Korean Society for Radiation Therapy
• /
• v.28 no.1
• /
• pp.35-46
• /
• 2016

Purpose : BoS(Base of Skull) Frame, the fixation tool which is used for the proton of brain cancer increases the lateral penumbra by increasing the airgap (the distance between patient and beam jet), due to the collision of the beam of the posterior oblique direction. Thus, we manufactured the fixation tool per se for improving the limits of BoS frame, and we'd like to evaluate the utility of the manufactured fixation tool throughout this study. Materials and Methods : We've selected the 3 patients of brain cancer who have received the proton therapy from our hospital, and also selected the 6 beam angles; for this, we've selected the beam angle of the posterior oblique direction. We' ve measured the planned BoS frame and the distance of Snout for each beam which are planned for the treatment of the patient using the BoS frame. After this, we've proceeded with the set-up that is above the location which was recommended by the manufacturer of the BoS frame, at the same beam angle of the same patient, by using our in-house Bos frame fixation tool. The set-up was above 21 cm toward the superior direction, compared to the situation when the BoS frame was only used with the basic couch. After that, we've stacked the snout to the BoS frame as much as possible, and measured the distance of snout. We've also measured the airgap, based on the gap of that snout distance; and we've proceeded the normalization based on each dose (100% of each dose), after that, we've conducted the comparative analysis of lateral penumbra. Moreover, we've established the treatment plan according to the changed airgap which has been transformed to the Raystation 5.0 proton therapy planning system, and we've conducted the comparative analysis of DVH(Dose Volume Histogram). Results : When comparing the result before using the in-house Bos frame fixation tool which was manufactured for each beam angle with the result after using the fixation tool, we could figure out that airgap than when not used in accordance with the use of the in-house Bos frame fixation tool was reduced by 5.4 cm ~ 15.4 cm, respectively angle. The reduced snout distance means the airgap. Lateral Penumbra could reduce left, right, 0.1 cm ~ 0.4 cm by an angle in accordance with decreasing the airgap while using each beam angle in-house Bos frame fixation tool. Due to the reduced lateral penumbra, Lt.eyeball, Lt.lens, Lt. hippocampus, Lt. cochlea, Rt. eyeball, Rt. lens, Rt. cochlea, Rt. hippocampus, stem that can be seen that the dose is decreased by 0 CGE ~ 4.4 CGE. Conclusion : It was possible to reduced the airgap by using our in-house Bos frame fixation tool for the proton therapy; as a result, it was possible to figure out that the lateral penumbra reduced. Moreover, it was also possible to check through the comparative analysis of the treatment plan that when we reduce the lateral penumbra, the reduction of the unnecessary irradiation for the normal tissues. Therefore, Using the posterior oblique the Brain cancer proton therapy should be preceded by decreasing the airgap, by using our in-house Bos frame fixation tool; also, the continuous efforts for reducing the airgap as much as possible for the proton therapy of other area will be necessary as well.

• Ocean Science Journal
• /
• v.41 no.4
• /
• pp.201-205
• /
• 2006

Larval specimens of Halicampus punctatus were collected off Ulsan and Uljin in December 2002 (three specimens) and off Ulsan in December 2003 (one specimen). These specimens are characterized by the following morphological characteristics: rings, 14 + 35 = 49; subdorsal rings, 1 + 3 = 4; dorsal fin rays, 19 - 20; pectoral fin rays, 14 - 15; anal fm rays, 9; head length (HL), 5.8 - 6.7 in the standard length; snout length, 1.9 in HL; snout depth, 3.7 - 5.2 in snout length. The number of caudal fin rays 9 is less than those of the other species in the same genus 10. Wide stripe bands composed of small pigments are shown in the trunk and the tail. Melanophores are not found in the dorsal fin, the pectoral fin, and the anal fin except the caudal fin. The supraoccipital crest is on the head. The frontal ridge is on the dorsal side of front trunk. The blanched ridges on the opercular are fused with a main ridge like a tree branch. A few branched ridges that are small and narrow on the trunk and the tail are fused with the main ridges. We report these specimens as the first record in Korea and name them 'Byeol-sil-go-ki' in Korean.

• The Korean Journal of Zoology
• /
• v.39 no.4
• /
• pp.437-446
• /
• 1996

The courtship and fighting behaviors and the sexual dimorphism of the salamander Hynohius leechil were studied. The parameters, snout vent length, body length (from snout to tail tip), and proportion of snout vent length to body size were larger in the female than the male. Five physical parameter in males were significantly correlated with one another, body length, snout vent length, head width, tail vent length, and tall depth, while all, except tail depth, were significantly correlated in females. Sexual behavior of H. leechIl involved external fertilization and consisted of three stages, identifying the female, aifrading the female, and insemination. The identification stage consisted of a positive advance by the male toward the female and display of snout contact. The male attracted the female with chin rubbing, tail undulation, smelling, and digging displays. The insemination process consisted of four phases, amplex, separating egg sacs from the female's cloacal, fertilizing eggs, and post fertilization. liighting behaviors were quite simple. The attacking male would generally bite the opposite male's upper chin or hind limbs and then shakes his head two or three times. The bitten male, which in most cases was of a dissimilar body size, quicidy escaped from the attacking male. After fighting, winning male usually displayed rapid tail undulation.

• Journal of Animal Science and Technology
• /
• v.57 no.12
• /
• pp.44.1-44.9
• /
• 2015

Background: Heat shock proteins play an important role in protection from stress stimuli and metabolic insults in almost all organisms. Methods: In this study, computational tools were used to deeply analyse the physicochemical characteristics and, using homology modelling, reliably predict the tertiary structure of the blunt snout bream (Ma-) Hsp70 and Hsc70 proteins. Derived three-dimensional models were then used to predict the function of the proteins. Results: Previously published predictions regarding the protein length, molecular weight, theoretical isoelectric point and total number of positive and negative residues were corroborated. Among the new findings are: the extinction coefficient (33725/33350 and 35090/34840 - Ma-Hsp70/ Ma-Hsc70, respectively), instability index (33.68/35.56 - both stable), aliphatic index (83.44/80.23 - both very stable), half-life estimates (both relatively stable), grand average of hydropathicity (-0.431/-0.473 - both hydrophilic) and amino acid composition (alanine-lysine-glycine/glycine-lysine-aspartic acid were the most abundant, no disulphide bonds, the N-terminal of both proteins was methionine). Homology modelling was performed by SWISS-MODEL program and the proposed model was evaluated as highly reliable based on PROCHECK's Ramachandran plot, ERRAT, PROVE, Verify 3D, ProQ and ProSA analyses. Conclusions: The research revealed a high structural similarity to Hsp70 and Hsc70 proteins from several taxonomically distant animal species, corroborating a remarkably high level of evolutionary conservation among the members of this protein family. Functional annotation based on structural similarity provides a reliable additional indirect evidence for a high level of functional conservation of these two genes/proteins in blunt snout bream, but it is not sensitive enough to functionally distinguish the two isoforms.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.46 no.4
• /
• pp.377-383
• /
• 2013

We ran a feeding trial to determine optimal dietary protein and lipid levels for growth of juvenile long snout bullhead Leiocassis longirostris Gunther. Eight experimental diets (P20L7, P20L14, P30L7, P30L14, P40L7, P40L14, P50L7 and P50L14) were formulated to contain 20%, 30%, 40% or 50% protein combined with either 7% or 14% lipid. Three replicate groups of fish (mean mass: 3.9 g/fish) were fed one of the experimental diets ad libitum for 8 weeks. Survival of fish fed the P20L14 diet was lower than that of fish fed the P40L14, P50L7 and P50L14 diets. Growth of fish fed diets containing 7% lipid increased with increasing protein level (up to 50% protein); growth of fish fed diets containing 14% lipid increased with increasing protein level (up to 30% protein). The feed efficiency of fish fed a diet with 50% protein and 7% lipid was higher than that of other groups. Whole body moisture and lipid contents were affected by dietary lipid level but not by dietary protein level. The crude lipid contents of fish fed 14% lipid diets were higher than those fed 7% lipid diets across all protein levels (other than the 50% level). Thus, under our experimental conditions, an increase in dietary protein level improved growth and feed efficiency of fish; a diet containing 50% protein with 7% lipid was optimal for growth and effective feed utilization in juvenile long snout bullhead.

• Korean Journal of Environment and Ecology
• /
• v.25 no.5
• /
• pp.666-672
• /
• 2011

This study examined the different growth rate of larval salamander Hynobius leechii by the predation risk. We collected salamander's eggs from Mountain Inwang. Eggs were treated by two different conditions: (1) cue - which had a predation risk three times a day; (2) no cue - which had no predation risk. Predation risk was conducted by using chemical cue from Chinese minnows. The chemical cue treatment started from the next day after the collection and ended one week after the hatching. Between the first week and the second week after the hatching we fed salamander larvae with tubifex ad. libitium. After the treatment phase, we measured snout - vent length of the each larva on the first week and the second week after the hatching. The results showed that there was a significant difference in the growth rate by the predation risk. From these results we found that predation risk can cause the different growth rate to the larval salamander and these changes could be affect their mortality.

• Korean Journal of Environment and Ecology
• /
• v.24 no.6
• /
• pp.744-750
• /
• 2010

This study examined the different polyphenism of larval salamander Hynobius ieechii according to two habitats, pond and stream. We collected salamander's eggs from three regions including Mountain Inwang, Surak and Gwangju. Eggs were treated by four different conditions according to predation level and habitat: high risk - which had a predation risk three times a day; low risk - which had no predation risk, pond and stream habitat. Predation risk was conducted by using chemical cue from Chinese minnows. The chemical cue treatment started from the day of collection and ended one week after the hatching. After the treatment phase, we measured the head width at the level of the eyes(HWE) and the largest head width(LHW) and snout-vent length of the each larva. We calculated the ratio of the head size by dividing HWE by LHW and made a comparison with each of the average ratio of head size according to the predation risk. The results showed that there was a significant difference in the ratio of the head size and snout-vent length according to the predation risk and habitat. From these results we found that predation risk and habitat condition can cause the different polyphenism to the larval salamander and these morphological changes could be affect their mortality.