• 한국공작기계학회논문집
• /
• 제16권5호
• /
• pp.151-156
• /
• 2007

In this paper, the creep characteristics of lead and lead-free solder joint were investigated using the QFP(Quad Flat Package) creep test. Two kind of solder pastes(Sn-3Ag-0.5Cu, Sn-0.2Sb-0.4Ag-37.4Pb) were applied to the QFP solder joints and each specimen was checked the external and internal failures(i.e., wetting failure, void, pin hole, poor-heel fillet) by digital microscope and X-ray inspection. The creep test was conducted at the temperatures of $100^{\circ}C$ and $130^{\circ}C$ under the load of 15$\sim$20% of average pull strength in solder joints. The creep characteristics of each solder joints were compared using the creep strain-time curve and creep strain rate-stress curves. Through the comparison, the Sn-3Ag-0.5Cu solder joints have higher creep resistance than that of Sn-0.3Sb-0.4Ag-37.4Pb. Also, the grain boundary sliding in the fracture surface and the necking of solder joint were observed by FE-SEM.

• 한국진공학회지
• /
• 제13권3호
• /
• pp.127-131
• /
• 2004

BGA(ball grid array) package에서 솔더볼의 피로강도에 대한 솔더 조성에 대한 영향을 조사하기 위하여 패키지 신뢰성 시험을 실시하였다. 공정조성 솔더 63Sn/37Pb, 62Sn/36Pb/2Ag, 63Sn/34.4Pb/2Ag/0.5Sb 솔더를 이용하여 제조된 시편을 MRT Lv3 (moisture resistance test level) 조건에서 전처리 후 T/C(temperature cycle test) 실험을 수행하였다. 각각의 신뢰성 시험에 대하여 전단강도를 측정하였으며, 미세 조직 사진을 얻었다. 또한, SEM (scanning electron microscope)과 EDX (energy dispersive X-ray)를 이용하여 파괴 기구에 대한 분석을 실시하였다. Sn63Pb34.5Ag2Sb0.5 솔더에서 Au-Sn 성장비는 63Sn/37Pb, 62Sn/36Pb/2Ag 솔더에 비해 느리다 솔더 조성에 따른 솔더볼의 전단응력 저하에 대하여 논의하였다.