• 제목/요약/키워드: Smooth Zone

검색결과 92건 처리시간 0.105초

Lagrangian Dynamic Smagronsky 난류모형과 SPH를 이용한 쇄파역에서의 비선형 천수거동에 관한 연구 (Numerical Analysis of Nonlinear Shoaling Characteristics over Surf Zone Using SPH and Lagrangian Dynamic Smagronsky Model)

  • 조용준;이헌
    • 한국해안해양공학회지
    • /
    • 제19권1호
    • /
    • pp.81-96
    • /
    • 2007
  • 단조해안에서의 비선형 천수거동을 가장 강건한 파랑모형인 Navier Stokes 식에 기초하여 수치모의 하였다. 이와 더불어 SUPERTANK LABORATORY DATA COLLECTION PROJECT(Krauss et al., 1992)에서 취득한 자료를 활용하여 Reynolds 응력에 대한 구배모형의 한계를 검증하였다. 취득한 쇄파대 유동계의 자기상관함수는 상당한 특성길이를 지니며 이러한 결과는 구배모형이 큰 오류를 야기할 수 있다는 사실을 시사한다. 이러한 인식에 기초하여 파랑모형은 Large Eddy Simulation(LES), Smooth Particle Hydrodynamics(SPH), Gaussian kernel function을 사용하여 수치 적분하였다. 잔차응력은 Lagrangian Dynamic Smagronski 모형(Meneveau et al.,1996)을 활용하여 모의하였으며 모의 기간 중 유체 알갱이간의 이격거리는 관성부영역의 특성길이보다 작게 유지되도록 노력하였다. 천수과정에서 진행되는 동조 비동조 고차 조화성분으로 전이된 파랑에너지로 인해 상당히 예리하고 왜도된 파형, 파형의 마루로부터 시작되는 물입자 자유낙하, 착수로 인한 커다란 물보라의 형성, 물보라 형성층의 해변으로의 이행, wave finger(Narayanaswamy와 Darlymple, 2002) 등이 비교적 정확히 재현되는 등 상당히 고무적인 결과를 얻었다.

비무장지대(DMZ) 문화유적 현황과 보전방안 (Status and Preservation of Cultural Relics in the Demilitarized Zone)

  • 이재
    • 헤리티지:역사와 과학
    • /
    • 제52권1호
    • /
    • pp.216-241
    • /
    • 2019
  • 현재까지 알려진 비무장지대(Demilitarized Zone : DMZ) 내의 문화재는 14종 35개소이지만 앞으로 더 증가될 것으로 보인다. 그중에서도 지하에 묻혀있는 철원도성(鐵原都城)과 김화 병자호란 전골총(戰骨塚)은 남과 북이 공동조사를 실시하여 그 실체를 밝히는 것이 보존방향의 첫걸음일 것이다. 특히 철원도성의 공동조사는 남북이 오랫동안 동일한 역사와 문화전통을 지녀온 같은 민족임을 일깨워줄 뿐만 아니라 비무장지대를 평화의 무대로 전환시키는 상징적 의미를 부여할 것이다. 김화의 전골총도 청(淸)의 침입에 대항하여 싸운 평안도 근왕군(謹王軍)의 전몰자 집단무덤인 만큼 남북의 공동조사를 통하여 그 위치와 규모 등을 확인하여 국가지정문화재로 관리해야 할 것이다. 또한 비무장지대는 이데올로기의 대립으로 인한 국제적 전쟁인 한국전쟁의 유산이라는 점에서 세계문화유산으로의 요건을 갖추고 있을 뿐만 아니라 100여종의 멸종위기종 및 천연기념물 외에도 6,000여종의 온대림을 갖고 있어 세계자연유산의 자격도 갖추고 있으므로 비무장지대를 유네스코 세계문화유산과 세계자연유산의 자격을 동시에 갖추고 있는 세계복합문화유산으로 등재할 수 있을 것이다. 그 외에도 비무장지대는 한국전 당시의 수많은 고지, 땅굴, 진지 등이 그대로 남아있을 뿐만 아니라 휴전협정으로 생긴 감시초소(GP), 군사분계선, 남북한 한계선 철조망, 판문점 등이 남아있어 그 일부구간과 전쟁시설을 선별하여 근대 문화재로 등록하는 것이 바람직할 것이다. 끝으로 도라산의 봉수지는 복원하여 남과 북이 평양-개성-도라산-서울을 잇는 전통시대의 통신시설을 필요시 재연하여 남북간의 원활한 소통을 상징적으로 보여주는 계기로 삼을 수 있을 것이다. 앞으로 다가올 종전으로 인한 비무장지대의 난개발에 대비하기 위하여 정부 및 문화재 전문가들은 비무장지대의 문화재 파악과 보전에 힘써야 할 것이며 무분별한 조사나 지뢰제거 등의 문제도 일관성 있게 통제를 해야 할 것이다.

Identification of Lacrymaria velutina (Pers. Ex Fr.) Konrad & Maubl. from Micheon-myeon, Jinju-city, Korea

  • Han, Ki-Soo;Volk, Thomas J.;Kim, Hee-Kyu
    • Mycobiology
    • /
    • 제38권4호
    • /
    • pp.249-255
    • /
    • 2010
  • We identified Lacrymaria velutina of the Coprinaceae in Korea. The unusually large and sturdy fruiting body, fibrillose to fibrillose-scaly cap and stalk without a volva with an obscure superior hairy ring zone or hairy annulus, and blackish brown, warted spores distinguished this species from closely related Psathyrella species. An illustrated account of the microscopic traits is presented. Fruiting bodies with obtusely hemispherical caps, 2.5~6 cm, becoming convex with age; surface dry, densely fibrillose-scaly with split margin; stipe, 4.5~6 cm, equal, hollow, fibrillose, dry, whitish above the superior ring zone, light brown below; crowded gills, adnexed, dark black at maturity. Pileipellis typically cellular with the gill edge appearing white and beaded. Blackish brown basidiospores that discolor in concentrated sulfuric acid. Spores elliptical, warted, $9\sim11{\times}6\sim8{\mu}m$, with prominent snout-like germpores. Cheilocystidia abundant, $57\sim68{\times}19\sim25{\mu}m$, and narrowly elongated clavate, often clustered in threes or fours. Pleurocystidia rarely present, $45\sim47.5{\times}12\sim13{\mu}m$, and clavate to utriform. This trait distinguishes our sample as L. velutina from other Psathyrella spp. of the Coprinaceae, which have smooth spores. This taxon was clarified by the observation that Psathyrella spores fade in concentrated sulfuric acid. A molecular phylogenetic study revealed that our specimen was Lacrymria velutipes, which is closely related to Lacrymaria lacrymabunda. Moreover, those two species are clearly distinguishable from other Psathyrella species, which agreed with the morphologically distinctive traits described above. We believe that this is the first report of this taxon, which has not been described in Korea.

레이저 반사광을 이용한 미세 표면 거칠기 측정 알고리즘에 관한 연구 (Study on Algorithm of Micro Surface Roughness Measurement Using Laser Reflectance Light)

  • 최규종;김화영;안중환
    • 대한기계학회논문집A
    • /
    • 제32권4호
    • /
    • pp.347-353
    • /
    • 2008
  • Reflected light can be decomposed into specular and diffuse components according to the light reflectance theory and experiments. The specular component appears in smooth surfaces mainly, while the diffuse one is visible in rough surfaces mostly. Therefore, each component can be used in forming their correlations to a surface roughness. However, they cannot represent the whole surface roughness seamlessly, because each formulation is merely validated in their available surface roughness regions. To solve this problem, new approaches to properly blend two light components in all regions are proposed in this paper. First is the weighting function method that a blending zone and rate can be flexibly adjusted, and second is the neural network method based on the learning from the measurement data. Simulations based on the light reflectance theory were conducted to examine its performance, and then experiments conducted to prove the enhancement of the measurement accuracy and reliability through the whole surface roughness regions.

Parameter calibrations and application of micromechanical fracture models of structural steels

  • Liao, Fangfang;Wang, Wei;Chen, Yiyi
    • Structural Engineering and Mechanics
    • /
    • 제42권2호
    • /
    • pp.153-174
    • /
    • 2012
  • Micromechanical facture models can be used to predict ductile fracture in steel structures. In order to calibrate the parameters in the micromechanical models for the largely used Q345 steel in China, uniaxial tensile tests, smooth notched tensile tests, cyclic notched bar tests, scanning electron microscope tests and finite element analyses were conducted in this paper. The test specimens were made from base metal, deposit metal and heat affected zone of Q345 steel to investigate crack initiation in welded steel connections. The calibrated parameters for the three different locations of Q345 steel were compared with that of the other seven varieties of structural steels. It indicates that the toughness index parameters in the stress modified critical strain (SMCS) model and the void growth model (VGM) are connected with ductility of the material but have no correlation with the yield strength, ultimate strength or the ratio of ultimate strength to yield strength. While the damage degraded parameters in the degraded significant plastic strain (DSPS) model and the cyclic void growth model (CVGM) and the characteristic length parameter are irrelevant with any properties of the material. The results of this paper can be applied to predict ductile fracture in welded steel connections.

Linear regression analysis for factors influencing displacement of high-filled embankment slopes

  • Zhang, Guangcheng;Tan, Jiansong;Zhang, Lu;Xiang, Yong
    • Geomechanics and Engineering
    • /
    • 제8권4호
    • /
    • pp.511-521
    • /
    • 2015
  • It is a common failure type that high-filled embankment slope sideslips. The deformation mechanism and factors influencing the sideslip of embankment slope is the key to reduce the probability of this kind of engineering disaster. Taking Liujiawan high-filled embankment slope as an example, the deformation and failure characteristics of embankment slope and sheet-pile wall are studied, and the factors influencing instability are analyzed, then the correlation of deformation rate of the anti-slide plies and each factor is calculated with multivariate linear regression analysis. The result shows that: (1) The length of anchoring segment is not long enough, and displacement direction of embankment and retaining structure are perpendicular to the trend of the highway; (2) The length of the cantilever segment is so large that the active earth pressures behind the piles are very large. Additionally, the surface drainage is not smooth, which leads to form a potential sliding zone between bottom of the backfill and the primary surface; (3) The thickness of the backfill and the length of the anti-slide pile cantilever segment have positive correlation with the deformation whereas the thickness of anti-slide pile through mudstone has a negative correlation with the deformation. On the other hand the surface water is a little disadvantage on the embankment stability.

Unsteady Analysis of Impeller-Volute Interaction in Centrifugal Pump

  • Cheah, Kean Wee;Lee, Thong See;Winoto, Sonny H.
    • International Journal of Fluid Machinery and Systems
    • /
    • 제4권3호
    • /
    • pp.349-359
    • /
    • 2011
  • An unsteady numerical analysis has been carried out to study the strong impeller volute interaction of a centrifugal pump with six backward swept blades shrouded impeller. The numerical analysis is done by solving the three-dimensional Reynolds Averaged Navier-Stokes codes with standard k-${\varepsilon}$ two-equations turbulence model and wall regions are modeled with a scalable log-law wall function. The flow within the impeller passage is very smooth and following the curvature of the blade in stream-wise direction. However, the analysis shows that there is a recirculation zone near the leading edge even at design point. When the flow is discharged into volute casing circumferentially from the impeller outlet, the high velocity flow is severely distorted and formed a spiraling vortex flow within the volute casing. A spatial and temporal wake flow core development is captured dynamically and shows how the wake core diffuses. Near volute tongue region, the impeller/volute tongue strong interaction is observed based on the periodically fluctuating pressure at outlet. The results of existing analysis also proved that the pressure fluctuation periodically is due to the position of impeller blade relative to tongue.

원발성 갑상선 림프종의 세침흡인 세포학적 소견 - 1예 보고 - (Fine Needle Aspiration Cytology of Primary Malignant Lymphoma of the Thyroid Gland - A Case Report -)

  • 권미선;이승숙;고재수;정진행;이교영
    • 대한세포병리학회지
    • /
    • 제12권1호
    • /
    • pp.67-71
    • /
    • 2001
  • Primary malignant lymphoma of the thyroid gland is uncommon malignancies. Its fine needle aspiration cytology (FNAC) findings are rarely described in the literature. This article highlights the FNAC diagnosis of primary malignant lymphoma of the thyroid gland. A 70-year-old female presented with a rapidly enlarging thyroid mass of five months' duration. FNAC smears showed low cellularity consisting of predominantly atypical enlarged lymphoid cells admixed with a few small lymphocytes, plasma cells, and oncocytic cells. Some disrupted lymphoid cells were also present. The tumor cells infiltrated into the thyroid follicular epithelium forming lymphoepithelial lesion, The cytologic appearance showed a diffuse mixture of cell types with only a few small, mature lymphocytes and many enlaraed lymphoid cells. The enlarged lymphoid cells were atypical and pleomorphic with nuclear clefting and irregularities. Grossly, the left lobe of the thyroid was nearly replaced by a diffuse firm to soft solid mass with smooth tan fish-flesh homogeneous cut surface. Histological diagnosis was diffuse large B-cell lymphoma with areas of marginal zone B-cell lymphoma of MALT type.

  • PDF

$Al_2O_3$ 세라믹의 미세구멍 가공시 가공조건과 보조가스가 미치는 영향 (The influence of processing condition and assistance gas in microhole machining of $Al_2O_3$ ceramics)

  • 이광길
    • 한국생산제조학회지
    • /
    • 제8권5호
    • /
    • pp.115-120
    • /
    • 1999
  • This research is a described result of experimental for the parameter's effecting the microhole machining by Nd-Yag laser, The parameters are energy, pulse interval time a kin of assisting gas and its pressure. The result reveals that parameter value of energy 0.08J, pulse 20Hz, interval time of 300 microseconds could be a good machining condition to make upper microhoel that is the diameter range of 50-70${\mu}{\textrm}{m}$. At tat time the assistant gas such air, $O_2$, Ar $N_2$, was appelied. Assistant gas of air makes heat affected zone enlarge due to burning of material surface. Also it makes microhole irregular and damageable. Because of refusion caused by chemical reaction with $Al_2O_3$ ceramic material . The $O_2$(99.9%) has good characteristics to get good drilling and smooth surface on pressure of 0.2kgf/$\textrm{cm}^2$ but it is expensive. Ar, $N_2$ make material crack and burnning and proved that to be unappropriate but, Ar was a better than $N_2$.

  • PDF

모서리 부위 연속 용접을 위한 아크 용접 로봇 시스템의 궤적 개발 (Trajectory Development of Robotic Arc Welding System for Continuous Welding of Corner Area)

  • 장교근;유범상
    • Journal of Welding and Joining
    • /
    • 제14권6호
    • /
    • pp.68-80
    • /
    • 1996
  • When a workpiece is to be arc welded around the outside corner, continuous welding without welding seam in the neighborhood of comer still remains a very difficult technique. Skilled welders weld comers by delicate“hand-eye coordination”while turning the workpiece manually, However, there is not a very clear solution to this problem in robotized arc welding process. In order to solve this problem, the coordination of a robot and a positioner with one or two axes is necessary. This paper presents a method of continuous welding around the corner of workpiece using the coordinated motion of a robot and a positioner. The positioner is either revolute jointed or prismatic jointed. In this paper, a clothoid curve is chosen for welding trajectory. The clothoid curve is excellent in connecting straight and curved weld-lines with good continuity and accommodates various welding conditions. By using this welding trajectory, the deceleration, which leads to widening of the melt and the heat affected zone, at comer area is reduced with strategic rotation of robot torch in coordination with a positioner providing smooth transition of welding torch orientation. Two types of special clothoid curves are developed for different weld slope conditions. These clothoid curves are applied to the case of linear and rotary Positioners at arc welding robot work-cell.

  • PDF