• 제목/요약/키워드: Smear effect

검색결과 142건 처리시간 0.023초

Effects of dentin surface preparations on bonding of self-etching adhesives under simulated pulpal pressure

  • Chantima Siriporananon;Pisol Senawongse;Vanthana Sattabanasuk;Natchalee Srimaneekarn;Hidehiko Sano;Pipop Saikaew
    • Restorative Dentistry and Endodontics
    • /
    • 제47권1호
    • /
    • pp.4.1-4.13
    • /
    • 2022
  • Objectives: This study evaluated the effects of different smear layer preparations on the dentin permeability and microtensile bond strength (µTBS) of 2 self-etching adhesives (Clearfil SE Bond [CSE] and Clearfil Tri-S Bond Universal [CTS]) under dynamic pulpal pressure. Materials and Methods: Human third molars were cut into crown segments. The dentin surfaces were prepared using 4 armamentaria: 600-grit SiC paper, coarse diamond burs, superfine diamond burs, and carbide burs. The pulp chamber of each crown segment was connected to a dynamic intra-pulpal pressure simulation apparatus, and the permeability test was done under a pressure of 15 cmH2O. The relative permeability (%P) was evaluated on the smear layer-covered and bonded dentin surfaces. The teeth were bonded to either of the adhesives under pulpal pressure simulation, and cut into sticks after 24 hours water storage for the µTBS test. The resin-dentin interface and nanoleakage observations were performed using a scanning electron microscope. Statistical comparisons were done using analysis of variance and post hoc tests. Results: Only the method of surface preparation had a significant effect on permeability (p < 0.05). The smear layers created by the carbide and superfine diamond burs yielded the lowest permeability. CSE demonstrated a higher µTBS, with these values in the superfine diamond and carbide bur groups being the highest. Microscopic evaluation of the resin-dentin interface revealed nanoleakage in the coarse diamond bur and SiC paper groups for both adhesives. Conclusions: Superfine diamond and carbide burs can be recommended for dentin preparation with the use of 2-step CSE.

저소성 연약지반에서의 스미어 존 특성 평가 (Characteristics of the Smear Zone by Vertical Drain of Low Plasticity on Soft Ground)

  • 강윤;백성철;김홍택
    • 한국지반환경공학회 논문집
    • /
    • 제8권3호
    • /
    • pp.27-33
    • /
    • 2007
  • 최근에 연약지반개량공사에서 연직배수공법은 가장 많이 사용하는 공법 중 하나이다. 그러나 개량을 위한 배수재의 시공시에 지반 교란이 발생하여 스미어 존이라는 교란영역을 발생시킨다. 이렇게 발생된 스미어 존의 특징은 그 영역내의 투수계수가 감소하여, 설계시 예상하였던 압밀이 원활히 이루어지지 않는 문제점이 발생 된다는 점이다. 스미어 존의 수평압밀계수, 수평투수계수는 압밀도에 직접적으로 영향을 미치는 중요한 설계인자이다. 그러나 기존에 수행되는 설계방법에서 이러한 주요설계인자의 산정방법은 수직압밀계수에 의하여 수평압밀계수 및 수평투수계수를 경험적으로 유추하여 설계를 수행하고 있다. 그러나 이러한 방법으로 산정된 수평투수계수, 수평압밀계수는 설계 특성상 불확실성에 대한 과대설계로 진행되어 시공성, 공사기간 및 경제적인 측면에서 큰 손실을 가져올 수 있게 된다. 따라서 이번 연구에서는 국내에 서해안과 남해안 지역에 널리 분포하고 있는 저소성 지반을 대상으로 선정, 실험을 수행하여 저소성의 실트 및 점토지반에서의 스미어 존의 크기를 평가하였으며, 원지반의 압밀특성 및 물리적 특성과의 상관성 분석을 수행하여 설계시 참고자료로 활용할 수 있도록 하였다.

  • PDF

도말층이 가온 수직가업 근관 충전후 치근단 누출에 미치는 영향 (EFFECT OF SMEAR LAYER ON THE APICAL LEAKAGE OF WARM VERTICAL CANAL FILLING)

  • 권태경;김성교
    • Restorative Dentistry and Endodontics
    • /
    • 제23권2호
    • /
    • pp.561-574
    • /
    • 1998
  • 본 연구는 근관형성시 생성되는 도말층의 존재가 System-B를 이용한 가온 수직가압충전 후의 미세누출에 미치는 영향을 관찰하고자 시행되었다. 최근에 발거된 20개의 상악전치를 이용하여 Ni-Ti 전동화일의 한 종류인 Quantec series 2000$^{TM}$(Tycom, USA) 과 수통 K-화일로 근관형성시 생성되는 도말층의 차이와 EDTA 용액 및 EDTA/차아염소산나트륨 용액의 2종 세척액에 따른 도말층의 제거양상을 주사전자현미경으로 관찰하였다. 44개의 상악전치를 이용하여 System-B를 이용한 가온 수직가압충전후의 미세누출의 정도를 근관형성시 생성되는 도말층의 존재유무에 따라 색소침투법과 치아투명화법을 이용하여 비교한 결과 다음과 같다. ${\cdot}$ 수동 K-화일이나 전동 Ni-Ti 화일로 근관형성한 군 모두에서 EDTA 용액을 사용한 군은 도말층이 완전히 제거되어 상아세관이 깨끗하게 개방되었지만, 차아염소산나트륨 용액만 사용한 군은 근관의 대부분이 도말층으로 덮혀 있었고 개방된 상아세관은 발견할 수 없었다. ${\cdot}$ 수동 K-화일 군과 전동 Ni-Ti 화일 군 사이에는 생성된 도말층의 차이를 관찰할 수 없었다. ${\cdot}$ EDTA 용액을 이용하여 도말층을 제거한 경우와 차아염소산나트륨 용액만을 사용한 경우간의 비교에서는, sealer를 사용했을 때에는 도말층을 제거한 경우가 유의하게 적은 색소 침투를 나타냈으며(p<0.01), sealer를 사용하지 않았을 때에는 EDTA 용액과 차아염소산나트륨 용액으로 세척한 경우가 다소 적은 색소 침투를 나타냈으나 통계적 유의성은 없었다(p>0.05). ${\cdot}$ EDTA 용액를 이용하여 도말층을 제거한 후 sealer사용 유무에 따른 비교에서는 sealer를 사용한 경우에서 통계적으로 유의하게 적은 색소침투를 나타냈다(p<0.01). ${\cdot}$ EDTA 용액을 사용하지 않고 차아염소산나트륨 용액만으로 근관형성한 후 sealer사용 유무에 따른 비교에서는 sealer를 사용한 경우에서 통계적으로 유의하게 적은 색소 침투를 보였다(p<0.01).

  • PDF

산 처리가 상아질 접착에 미치는 영향 (EFFECT OF ACID-TREATMENT ON DENTIN BONDING)

  • 김영경;김성교;박진훈
    • Restorative Dentistry and Endodontics
    • /
    • 제18권1호
    • /
    • pp.73-83
    • /
    • 1993
  • 산 처리방법에 따른 상아질 접착을 평가하고 표면처리 후의 상아질 표면의 성상변화 및 파단면의 양상을 관찰하기 위해 발거된 구치 에 10% polyacrylic acid (GC Dental Industrial Corp., U. S. A.), 10 % 인산(Bisco Inc., U. S. A.) 및 10-3 용액 (Parkell Bio-Materials, U. S. A.)을 사용하여 상아질 표면을 처리하고 모든 시편에 상아질 접착제인 All Bond 2$^{(R)}$(Bisco Inc., U.S.A.)를 도포하였으며 복합레진 (Silux Plus$^{(R)}$, 3M Co., U.S.A.)을 첨가한 후 접착강도를 측정하고 상아질 표면 및 파단면을 주사 전자현미경으로 관찰, 비교하여 다음과 같은 결과를 얻었다. 1. 접착강도는 상아질 표면을 산 처리한 군이 무처리한 대조군에 비해 높게 나타났고, 산처리를 시행한 군들 간에는 10-3 용액으로 처리한 군이 가장 높았으며 10% 인산으로 처리한 군, 10% polyacrylic acid로 처리한 군의 순이었다(p<0.01). 2. 상아질 표면의 관찰에서, 무 처리의 상아질 면은 상아세관이 개방되지 않은 채 도말층으로 덮혀 있었고, 10% polyacrylic acid로 처리한 상아질 면은 도말충이 제거되고 상아세관이 개방되어 있었으나 상아세관 내에 smear plug이 일부 남아 있었으며, 10% 인산또는 10-3 용액으로 처리한 상아질 면은 도말층 및 smear plug이 모두 제거되고 상아세관이 완전히 개방되어 있음이 관찰되었다. 3. 파단면의 관찰에서, 무 처리군에서는 도말층 내에서 파단이 일어났으며, 10% polyacrylic acid로 처리한 군에서는 상아세관 내 잔존 레진 tag이 관찰되지 않았으나 10% 인산 및 10-3 용액으로 처리한 군에서는 상아세관 내의 잔존 레진 tag이 관찰되었다. 4. 파단 양상에 있어서, 접착강도가 큰 군일수록 응집성 파단의 빈도가 증가되어 나타났으며, 각 시편에서 구한 접착강도와 응집 파단율의 상관 계수는 0.71이었다.

  • PDF

The effect of a diode laser and traditional irrigants on the bond strength of self-adhesive cement

  • Tuncdemir, Ali Riza;Yildirim, Cihan;Ozcan, Erhan;Polat, Serdar
    • The Journal of Advanced Prosthodontics
    • /
    • 제5권4호
    • /
    • pp.457-463
    • /
    • 2013
  • PURPOSE. The purpose of this study was to compare the effect of a diode laser and traditional irrigants on the bond strength of self-adhesive cement. MATERIALS AND METHODS. Fifty-five incisors extracted due to periodontal problems were used. All teeth were instrumented using a set of rotary root canal instruments. The post spaces were enlarged for a No.14 (diameter, 1.4 mm) Snowlight (Abrasive technology, OH, USA) glass fiber reinforced composite post with matching drill. The teeth were randomly divided into 5 experimental groups of 11 teeth each. The post spaces were treated with the followings: Group 1: 5 mL 0.9% physiological saline; Group 2: 5 mL 5.25% sodium hypochlorite; Group 3: 5 mL 17% ethylene diamine tetra acetic acid (EDTA), Group 4: 37% orthophosphoric acid and Group 5: Photodynamic diode laser irradiation for 1 minute after application of light-active dye solution. Snowlight posts were luted with self-adhesive resin cement. Each root was sectioned perpendicular to its long axis to create 1 mm thick specimens. The push-out bond strength test method was used to measure bond strength. One tooth from each group was processed for scanning electron microscopic analysis. RESULTS. Bond strength values were as follow: Group 1 = 4.15 MPa; Group 2 = 3.00 MPa; Group 3 = 4.45 MPa; Group 4 = 6.96 MPa; and Group 5 = 8.93 MPa. These values were analysed using one-way ANOVA and Tukey honestly significant difference test (P<.05). Significantly higher bond strength values were obtained with the diode laser and orthophosphoric acid (P<.05). There were no differences found between the other groups (P> .05). CONCLUSION. Orthophosphoric acid and EDTA were more effective methods for removing the smear layer than the diode laser. However, the diode laser and orthophosphoric acid were more effective at the cement dentin interface than the EDTA, Therefore, modifying the smear layer may be more effective when a self-adhesive system is used.

모래기둥의 설치 간격에 관한 연구 (A Study on the Spacing between the Sand Drain Wells)

  • 김홍택
    • 한국지반공학회지:지반
    • /
    • 제8권1호
    • /
    • pp.67-80
    • /
    • 1992
  • 본 연구에서는 시간에 따른 공사하중의 크기 변화가 다양할 경우에, smear zone및 well resistance의 영향을 모두 고려하여 설계시에 요구되는 모래기등 영향원의 반지름(즉, 모래기둥의 설치간격)을 결정하기 위한 해석법을 제시하였다. 이를 위해 단순선형점증하중의 경우에 대해 제시된 Olson의 해석법(smear zone 및 well resistance의 영향을 모두 무시한 경우)을 변형하였으며, 아울러 제시된 해석법을 토대로 설계에 관련된 여러가지 변수가 모래기end의 설치간격에 미치는 영향을 조건별로 분석하였다.

  • PDF

An in-vitro investigation of appearance of smear layer removal depending on application times and temperature of EDTA

  • Shin, Jang-Shik;Cho, Yong -Bum
    • 대한치과보존학회:학술대회논문집
    • /
    • 대한치과보존학회 2001년도 추계학술대회(제116회) 및 13회 Workshop 제3회 한ㆍ일 치과보존학회 공동학술대회 초록집
    • /
    • pp.574.2-574
    • /
    • 2001
  • The objective of this study was to evaluate the effect of EDTA irrigant depending on application times and temperatures. 31 human mature extracted teeth with a single canal and a closed apex were sectioned with microtome in 3mm thickness. They were distributed randomly into 6 groups of 10 specimens each and control group of 2 specimens. Each specimen was prepared with $GT^{TM}$ rotary file (Dentsply, Maillefer Co., Swiss) and irrigated with 3ml sodium hypochlorite every minute. Then smear layer wasn removed with EDTA solution ($PULPDENT^{\circledR}$, PULPDENT Co., USA.) except two control specimens. Specimens of each group were irrigated with 17% EDTA.(omitted)

  • PDF

Sand Drain 지반에 대한 변형해석법의 적용성 (The Applicability of Numerical Analysis Technique to The Soft Clayey Foundation Improved by Sand Drain)

  • 이진수;이문수;장철
    • 한국농공학회지
    • /
    • 제40권1호
    • /
    • pp.96-105
    • /
    • 1998
  • Soil properties, drain conditions and numerical analysis technique have great influence upon consolidation behavior. In relevant to the above described fact, this paper aims to examining the applicability of prediction model of consolidation as well as deformation characteristics for soft clayey foundation improved by sand drain. A case study for actual foundation of Kwangyang steel works was performed. Single drain consolidation model proposed by Hansbo and Biot's consolidation theory coupled with modified Cam-clay model developed during the research were employed for the FEM numerical analysis of the foundation. Both smear effect and drain capacity were taken into account for the analysis. Finally the applicability of the newly developed technique to the behavior of foundation composed of soft clay proved satisfactory.

  • PDF

상아질 치관 치료를 위한 EDTA Na염의 킬레이션 (The chelation of EDTA sodium salts solution for the root canal dentin treatment)

  • 송근호;장화익;이광래
    • 산업기술연구
    • /
    • 제31권A호
    • /
    • pp.59-62
    • /
    • 2011
  • The demineralizing effect of chelating agents(Maleic acid solution, EDTA salts solutions; disodium-, trisodium- and tetrasodium-EDTA) on hydroxyapatite(HA) for the root canal dentin treatment was investigated. Dissolution of Ca from HA was increased with increasing immersion time in chelating solutions. Among the EDTA salts solutions, tetrasodium-EDTA was least effective in dissolving Ca out from HA, and trisodium-EDTA was the most effective. Trisodium-EDTA solutionmight be more effective in removing the smear layer compared to tetrasodium-EDTA solution.

  • PDF

자궁 경질부 도말 표본에서 관찰된 Curschmann 나선체 검색 (Curschmann's Spirals in Cervico-Vaginal Smears)

  • 박인애;함의근
    • 대한세포병리학회지
    • /
    • 제2권1호
    • /
    • pp.56-61
    • /
    • 1991
  • Curschmann's spirals morphologically similar to those seen in sputum were found in cervico-vaginal smears of six patients ranged from 28 to 40 years of age, during 18 months from January. 1985 to June 1986. The prevalence was 1 in 2147 smears in that period. All of them had gynecologic disorders without systemic effect such as chronic cervictis in three, leiomyoma in one, pelvic inflammatory disorder in one, and primary infertility in one. The Curshmann's spirals in the smear showed varying degrees of maturation from wavy incipient ones to highly celled mature ones, admixed with thick mucinous back-ground, suggesting of their production in the uterine cervix itself. Also the recent history of undergone cryocautery, electrocautery or parturition suggest its production in the endocervical gland due to mechanical obstruction and/or change in biochemical composition of mucus.

  • PDF