• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.2
• /
• pp.151-156
• /
• 2015

As the proliferation of smart phone, almost every user has one's own smart phone, and the user could get the global position and location based services using GPS system outdoors. But indoor positioning system using GPS does not work, and it could not detect global position using TDOA local positioning system. In this paper, a new indoor global positioning system for smart phone employing GPS receiver and electronic compass device is proposed with the TDOA local positioning system using acoustic signal, and the performance and the experimental result are described.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.7
• /
• pp.3322-3337
• /
• 2018

Sleep mode detection is a significant power management and green computing feature. However, it is difficult for televisions and smart TVs to detect deactivation events because we can use these devices without the assistance of an input device. In this paper, we propose a robust method for smart TVs to detect deactivation events based on a visual combination of face and motion detection. The results of experiments conducted indicate that the proposed method significantly reduces incorrect face detection and human absence by means of motion detection. The results also show that the proposed method is robust and effective for smart TVs to reduce power consumption.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.29 no.2
• /
• pp.75-78
• /
• 2016

This research was designed 700 level power MOSFET for smart LED driver ICs package. And we analyzed electrical characteristics of the power MOSFET as like breakdown voltage, on-resistance and threshold voltage. Because this research is important optimal design for smart LED ICs package, we designed power MOSFET with design and process parameter. As a result of this research, we obtained $60{\mu}m$ N-drift layer depth, 791.29 V breakdown voltage, $0.248{\Omega}{\cdot}cm^2$ on resistance and 3.495 V threshold voltage. We will use effectively this device for smart LED driver ICs package.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.2
• /
• pp.416-422
• /
• 2011

Smart grid is the next generation intelligent power grid that combines the existing electric power infrastructure and information infrastructure. It can optimize the energy efficiency in both directions, suppliers and power consumers to exchange information in real time. In smart grid environments, with existing network security threats due to the smart grid characteristics, there are additional security threats. In this paper, we propose a security mechanism that provides mutual authentication and key agreement between a remote user and the device. The proposed mechanism has some advantages that provides secure mutual authentication and key agreement and secure against a replay attack and impersonation attacks.

• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2005.05a
• /
• pp.98-101
• /
• 2005

The study applied to a smart technology for every filed in the various countries of world is actively progressing. In the field of construction, a home-network market based on the smart technology is getting to occupy a position as a social issue. and lots of construction companies are taking part in the home-network market to take possession of a market and is investing for a marketing and a technical study in abundance. as a result, the concern for Household Housing of a future and for how to apply the material technology is getting increase. In this study, it has a understanding of such a necessity and suggests the research of the room-space Module to apply the smart technology and a prototype of a house as a building device. and it predicts not only the development of the technology but also about how to change the home-space that we live.

• Smart Media Journal
• /
• v.8 no.3
• /
• pp.47-52
• /
• 2019

In this paper, we designed HW / SW interfaces for processing the signals of capacitive sensors like Electric Potential Sensor (EPS) to detect the surrounding electric field disturbance as feature signals in motion recognition systems. We implemented a smart light control system with those interfaces. In the system, the on/off switch and brightness adjustment are controlled by hand gestures using the designed and fabricated interface circuits. PWM (Pulse Width Modulation) signals of the controller with a driver IC are used to drive the LED and to control the brightness and on/off operation. Using the hand-gesture signals obtained through EPS sensors and the interface HW/SW, we can not only construct a gesture instructing system but also accomplish the faster recognition speed by developing dedicated interface hardware including control circuitry. Finally, using the proposed hand-gesture recognition and signal processing methods, the light control module was also designed and implemented. The experimental result shows that the smart light control system can control the LED module properly by accurate motion detection and gesture classification.

• Journal of Advanced Information Technology and Convergence
• /
• v.10 no.1
• /
• pp.85-97
• /
• 2020

As a solution to the rapid urbanization problem, interest in and use of personal mobility devices such as bicycles and electric kickboards are increasing, and accidents are also rising every year. In this study, a smart vest to prevent traffic accidents and promote safe driving of personal mobility users was designed and implemented. Unlike the existing products on the market that indicate directions using buttons, the smart vest designed and implemented in this study indicates the moving direction by shaking a bracelet and displays the direction by LEDs on the vest. Therefore, this product was designed and implemented to be safer and differentiated from other existing products.

• Journal of Urban Science
• /
• v.11 no.1
• /
• pp.1-8
• /
• 2022

As the magnitude and frequency of earthquakes increase in Korea, interest in earthquake damage reduction technology has increased. Therefore, research on vibration damping devices that directly respond to seismic loads is being actively researched. After an earthquake, damage or destruction of the device occurs due to the yield of materials, and thus it takes considerable cost and time for restoration and replacement. To supplement the problems of the existing earthquake damage reduction technology, a study was conducted on the recentering smart damper that can be used continuously after an earthquake. In this study, the recentering smart damper that can be restored to its original shape after load removal was developed using superelastic shape memory alloy, pre-compressed polyurethane. General steel was commonly applied to verify the seismic performance of the superelastic shape memory alloy, and the performance of the smart damper was verified according to the amount of polyurethane pre-compressed

• Korea Science and Art Forum
• /
• v.19
• /
• pp.561-568
• /
• 2015

A lot of electrical energy is used in our daily life. While energy saving concerns are overall, consumption practices of people in general are very different. People want to control their energy use and by knowing the amount of energy they use. Smart plug is a new device that measures electricity usage through each plug at an outlet with on/off control. User experience for electrical devices in regards to electricity usage should be newly designed. In this study, based on the survey, personas have been devised and their energy use experience in relation with smart plugs have been designed. Service models have been designed as well. By designing service with smart plug, user could enhance the experience of energy usage and saving and energy consumption practices could be improved in a sustainable manner.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.18 no.9
• /
• pp.2805-2817
• /
• 2024

This study focuses on the performance of device-to-device (D2D) communications in underlay cellular networks by analyzing key metrics such as successful transmission probability, coverage probability, and throughput. Under the homogeneous Poisson point process (PPP) spatial distribution of full-duplex (FD)-D2D users in cellular networks, stochastic geometry tools are used to derive approximate expressions for D2D users' coverage probability and throughput. In comparison to the conventional half-duplex (HD) communication mode, when the self-interference cancellation factor β reaches -95 dB, there is a substantial improvement in the throughput of FD-D2D users, nearly doubling their gain. Additionally, experimental results demonstrate that the Newton iterative algorithm can be used to optimize the targeted signal-to-interference-plus-noise-ratio (SINR) threshold of users within the range of (10, 20) dB.