• International journal of advanced smart convergence
• /
• v.11 no.4
• /
• pp.41-46
• /
• 2022

This study is a Ku-band array antenna for the manufacture of low-orbit satellite communication terminals, designed to have miniaturization, high gain, and wide beam width. The transmission of low-orbit satellite communication has a right-rotating circularly polarized wave, and the reception has a left-rotating circularly polarized wave. The 4×8 array antenna was separated for transmission and reception, and it was combined with the RF circuit part of the transmitter and receiver, and was terminated in the form of a waveguide for RF signal impedance matching in the form of a transition from the microstrip line to the waveguide. The 30° beam width of the receiver maximum gain of 19 dBi and the 29° beam width of the transmitter maximum gain of 18 dBi are shown. Through this antenna configuration, the system was configured to suit the low-orbit satellite transmission/reception characteristics.

• Journal of Fashion Business
• /
• v.27 no.2
• /
• pp.39-51
• /
• 2023

The purpose of this study was to effectively improve the thigh muscles of adult women working from home due to COVID-19. In this study, ten adult women working from home performed 1) an electromyography test, 2) a static balance test on a balance board, and a 3) dynamic balance test by squatting on a Bosu ball four times: before electric muscle stimulation (EMS), after EMS, after high-intensity circuit training (HICT), and after EMS plus HICT. For this test, EMS was attached to a medical knee support to manufacture an EMS knee band that could be easily worn regardless of the location. For the experiment, EMS(electric muscle stimulation) was attached to the medical knee protector to manufacture an EMS knee band that can be easily worn regardless of location, and was measured based on the right foot. The study results confirmed that in all tests (electromyography test, static balance test on the balance board, and dynamic balance test by squatting on a Bosu ball), thigh strength improved in the order of treatment before EMS, after EMS, after HICT, and after EMS plus HICT. The study showed that people working from home or with activity restrictions due to COVID-19 had better exercise effects when wearing the EMS knee band and performing HICT, even in a small space.

• Journal of Institute of Control, Robotics and Systems
• /
• v.20 no.5
• /
• pp.570-577
• /
• 2014

This paper describes the design of a force applying system for a smart phone curved glass molding system and its characteristic test. The force applying system is composed of a motor and gear, a rectilinear movement structure, a force sensor, an LVDT (Linear Variable Differential Transformer) sensor, an up and down moving block, and so on. The system precisely controls the applying force and time to the plane glass because the glass can be easily destroyed under applied force, and can be bent imperfectly. As a result of the characteristic test, the curved glass can be manufactured using this system, and the holding time under 0N force, the applying force to the plane glass, the time for applying from 0N to maximum force, and the holding time under maximum force at the manufacture feasible temperature $620^{\circ}C$ were found.

• Journal of the Korean Society for Precision Engineering
• /
• v.31 no.7
• /
• pp.561-567
• /
• 2014

Precision injection mold is an essential element in order to manufacture small and precision plastic lenses used for phone camera. There are many critical factors to meet the requested specifications of high quality plastic lenses. One of the main issues to realize high quality is minimizing decenter value, which becomes more critical as pixel numbers increases. This study suggests the method to minimize decenter value by modifying ejecting structure of the mold. Decenter value of injection-molded lens decreased to 1 ${\mu}m$ level from 5 ${\mu}m$ by applying suggested ejecting method. Also, we also developed BIS (Built-in Sensor) based smart mold system, which has pressure and temperature sensors inside of the mold. Pressure and temperature profiles from cavities are obtained and can be used for deduction of optimal injection molding condition, filling imbalance evaluation, status monitoring of injection molding and prediction of lens quality.

• International journal of advanced smart convergence
• /
• v.4 no.1
• /
• pp.1-10
• /
• 2015

Automotive Theft has been an obstinate problem around the world. Design and manufacture of anti-theft systems have become more and more complex due to the rise in complexity of theft in the system. Most of the anti-theft systems available in the market, are the alarm types which audibly deter some thieves away but do not prevent one's car from being stolen and even are not good enough to meet the growing complexity of theft in the country. This paper presents a simple and an efficient anti-theft system which provides improved security by the use of efficient access mechanisms and immobilization systems. This security system can immobilise an automobile and its key auto systems through remote control when it is stolen. It hence deters thieves from committing the theft. It also effectively prevents stealing of key auto systems for reselling by introducing four layers of security features written in the form of firmware and embedded on the Electronic Control Units (ECUs). The particulars of system design and operation are defined in the paper. The experimental outcomes show that this system is practicable and the owner can steadily control his vehicle within a few seconds.

• International journal of advanced smart convergence
• /
• v.8 no.4
• /
• pp.26-33
• /
• 2019

We conducted research to evaluate economically and engineering about the synthesis of Magnesium Oxide, MgO, nanoparticles using physicochemical methods. The method used was economic evaluation by calculating GPM, BEP, PBP, and CNPV. The other method used was engineering perspective. MgO nanoparticles were synthesized by reacting Mg(NO₃)₂ and NaOH with a mole ratio 1: 2. Mg(OH)₂ formed was heated and calcined to remove water content and to oxidation to form MgO. An economic evaluation by calculating GPM and CNPV for the production of MgO nanoparticles on an industrial scale shows that the payback period (PBP) occur in the third year and profits increase each year. Tax variations show that the higher of tax, the lower profits received. When there was an increase of selling prices, the profit was greater. The variable cost used is the price of raw material. When there was an increased in the variable cost price, the payback period was longer and the profits was reduced. The benefit of this research is knowing the industrial production of MgO nanoparticles is beneficial. The function of MgO nanoparticles is a material for the manufacture of ceramics and can be used as an antimicrobial in the water filtration process.

• Smart Structures and Systems
• /
• v.8 no.1
• /
• pp.53-67
• /
• 2011

Human state in human-machine systems highly affects the overall system performance, and should be detected and monitored. Physiological cues are essential indicators of human state and useful for the purpose of monitoring. The study presented in this paper was focused on developing a bio-inspired sensing system, i.e., Nano-Skin, to non-intrusively measure physiological cues on human-machine contact surfaces to detect human state. The paper is presented in three parts. The first part is to analyze the relationship between human state and physiological cues, and to introduce the conceptual design of Nano-Skin. Generally, heart rate, skin conductance, skin temperature, operating force, blood alcohol concentration, sweat rate, and electromyography are closely related with human state. They can be measured through human-machine contact surfaces using Nano-Skin. The second part is to discuss the technologies for skin temperature measurement. The third part is to introduce the design and manufacture of the Nano-Skin for skin temperature measurement. Experiments were performed to verify the performance of the Nano-Skin in temperature measurement. Overall, the study concludes that Nano-Skin is a promising product for measuring physiological cues on human-machine contact surfaces to detect human state.

• The Journal of the Korea Contents Association
• /
• v.13 no.5
• /
• pp.103-116
• /
• 2013

Meanwhile, the governmental organization has been familiar with construction and method of one-way communication focused on public relation. As a result, it is true that there are few customers who have interest in, understand, and actively participate in public policy of the government.However, by propagation of smart phone terminal, public relation of government policy is diversified such as SNS, application manufacture, etc. It paved the way for actively increasing customers' comprehension of relevant information and participation as well. With that background in mind, this research tried to search pattern and feature of SNS strategy through domestic and American examples for improving trustof government policy and find common ground in order to seek for solution to help government office conduct a PR campaign more efficiently through SNS.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1998.03a
• /
• pp.155-159
• /
• 1998

This paper describes a research work of developing a computer-aided design and manufacturing (CAD-CAM) of irregular shaped sheet metal product for blanking or piercing and bending operation. An approach to the system is based on the knowledge-based rules. Knowledge for the system is formulated form plasticity theories, experimental results and the empirical knowledge of field experts. This system has been written in AutoLIST on the AutoCAD and in customer tool kit on the SmartCAM with a personal computer and is composed of nine modules. the system is designed by considering several factors, such as material and thickness of product, complexities of blank geometry and punch profile, diameter and material of a wire, and availability of press. This system is capable of unfolding a formed sheet metal to give flat pattern and automatically account for the adjustment of bending allowances to match tooling requirements by checking dimensions and generating NC data automatically according to drawings of die-layout module. Results carried out in each module will provide efficiencies to the designer and the manufacture of blanking or piercing and bending die in this field.

• International journal of advanced smart convergence
• /
• v.4 no.2
• /
• pp.29-33
• /
• 2015

In this paper, we propose the method to improve the performance of the antenna system that contains three bands, such as Lte3G, WLAN and Lte4G. This antenna has an advantage that can cover the three different frequency bands 2.1GHz, 2.4GHz and 2.6GHz through one antenna design. The design and simulations are done using CST Microwave Studio 2014 program. The antenna is designed by using the FR-4 (lossy) substrate with the dielectric constant of er=4.3 and dielectric loss tangent 0.025. The substrate dimensions are the following; Thickness[h] is 1.6mm, Length is 90mm, and Width is 40mm. The ground is designed by using the PEC material with h=0.035mm. The patch is designed by using the copper with h=0.035mm. In the near future, we will fabricate the antenna, which we have designed, and then apply this antenna to the mobile communication system. And we will test this mobile communication system for the diverse environments.