• Journal of Information Processing Systems
• /
• v.15 no.1
• /
• pp.181-188
• /
• 2019

A production system is a management system that supports all activities to perform production operations at the manufacturing site. From the point-of-view of a smart factory, smart manufacturing systems redesigned the concept of onsite production systems to fit the entire system and its necessary functional composition. In this study, we select the key functions needed to build a smart factory for a PCB line and propose a new six-step model for the deployment of a smart manufacturing system by integrating essential functions. The smart manufacturing system newly classified the production and operation tasks of PCB manufacturing and selected necessary functions through requirement analysis and benchmarking of advanced companies. The selected production operation tasks are mapped to the functions of the system and configured into seven modules, and the optimal deployment model is presented to allow flexible responses to the characteristics of the tasks. These methodologies are first presented in this study, and the proposed model was applied to the PCB line to confirm that they had significant changes in the work method, qualitative effects, and quantitative effects. Typically, lead time and WIP have reduced by about 50%.

• Transactions of Materials Processing
• /
• v.24 no.3
• /
• pp.212-217
• /
• 2015

SmartCrown is a system to control the plate crown by shifting the sine-shaped work rolls in the axial direction. The control range of the plate crown depends on a depth of sine-shaped roll profile because the roll radius varies continuously along the axial direction. When the roll profile is changed to improve the control range, the contact stress between the work roll and the back-up roll also changes. In the current study, the contact stress for various profiles and rolling conditions were analyzed using the finite element method and compared with results from Hertzian contact theory. A submodel method is used to increase the accuracy of the finite element analysis. The analysis results showed that the maximum increase in the contact stress was only 53MPa, so it is anticipated that no back-up roll spalling will occur.

• Journal of Distribution Science
• /
• v.22 no.1
• /
• pp.37-46
• /
• 2024

Purpose: This study aims to address the overlooked micro-level aspects within Smart Manufacturing (SM) research, rectifying the misalignment in manufacturing firms' estimation of their technological adoption capabilities. Drawing upon the Social-Technical Systems (STS) theory, this paper utilises innovation capability as a mediating variable, constructing a human-centric organizational model to bridge this research gap. Research design, data and methodology: This study collected data from 233 Chinese manufacturing firms via online questionnaires. Introducing innovation capability as a mediating variable, it investigates the impact of social-technical system dimensions (work design, social subsystems, and technical subsystems) on SM adoption willingness. Smart PLS 4.0 was employed for data analysis, and Structural Equation Modelling (SEM) validated the theoretical model's assumptions. Results: In direct relationships, social subsystems, technical subsystems, and work design positively influence firms' innovation capabilities, which, in turn, positively impact SM adoption. However, innovation capability does not mediate the relationship between technical subsystems and SM adoption. Conclusions: This study focuses on the internal micro-level of organisational employees, constructing a human-centric framework that emphasises the interaction between organisations and technology. The study fills empirical gaps in Smart Manufacturing adoption, providing organisations with a means to examine the integration of employees and the organisational social-technical system.

• Journal of information and communication convergence engineering
• /
• v.16 no.1
• /
• pp.31-37
• /
• 2018

In this work, we propose an analytic framework for evaluating the quality of service and dimensioning the link capacity in the gateway router of a smart farm with a greenhouse eco-management system. Specifically, we focus on the gateway router of an IoT network that provides an access service for smart farms. We design the link capacity of a gateway router that is used for the remote management of the greenhouse eco-management system to accommodate both time-critical and delay-tolerant traffic in a greenhouse LAN. For this purpose, we first investigate the ecosystem for smart farm, and we define the specification and requirements of the greenhouse eco-management system. Second, we propose a system model for the link capacity of a gateway that is required to guarantee the delay performance of time-critical applications in the greenhouse LAN. Finally, the validity of the proposed system is demonstrated through a series of numerical experiments.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.2
• /
• pp.151-156
• /
• 2015

As the proliferation of smart phone, almost every user has one's own smart phone, and the user could get the global position and location based services using GPS system outdoors. But indoor positioning system using GPS does not work, and it could not detect global position using TDOA local positioning system. In this paper, a new indoor global positioning system for smart phone employing GPS receiver and electronic compass device is proposed with the TDOA local positioning system using acoustic signal, and the performance and the experimental result are described.

• Journal of Information Technology Services
• /
• v.13 no.3
• /
• pp.93-110
• /
• 2014

With the explosive proliferation of smart devices that may be connected to the fast Internet, virtual desktop interfaces(VDI) are being implemented in enterprises allowing employees to work anywhere anytime in the same technological environment. As this kind of systems are intended to raise the work performance, a research model is constructed from the review of research literature on service quality and work design. The model consists of VDI system service quality (ubiquity, availability, compatibility, security and ease of use), system satisfaction, task performance and job satisfaction. As VDI is designed as a support system for cooperative work, the task interdependence adopted from the work design theory is postulated here as moderating the effect of user satisfaction on task performance and job satisfaction. 147 data points were collected by a survey of VDI users in a global firm and subjected to PLS analysis. Interestingly, ubiquity and compatibility seem to be not statistically significant for user satisfaction while availability, security and ease of use of VDI system are statistically significant. Task interdependence is found to be a relatively strong mediator between system user satisfaction and task performance, however, interestingly, the coefficient come out as negative. This may indicate that the influence of VDI user satisfaction on task performance would not be high in highly interdependent tasks. Considering that VDI is intended for supporting 'interdependence' in cooperative work, this finding is a bit surprising. In-depth discussions are made in the discussion followed by future research directions.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.21 no.4
• /
• pp.181-194
• /
• 2019

The purpose of this study is to analyze the problems associated with the domestic fashion sewing industry and suggest solutions for re-development. The research methods are a content analysis of literature, including articles and reports, and interviewing practitioners who are in charge of the fashion industry. The problems of the domestic fashion sewing industry are as follows. 1. Weakness in price competitiveness and a lack of work. 2. Aging of workers and difficulty securing new workers. 3. The age of the production facilities and the lack of manpower required for mass production. 4. Unrealistically low cost of labor due to over-competition considering the lack of work.5. The prevalence of illegal label grinding. The solutions to the problems listed above are as follows. 1. Establishment of a win-win effort between fashion brands and sewing companies. 2. Allow systematic education, support, and development of a meister system for fostering sewing manpower. 3. Undertake efforts to improve the sewing work environment. 4. Establishment of the system for realizing the actual cost of labor. 5. Establishment of a quota system to secure domestic sewing production. 6. Construction of Smart DB to connect work orders. 7. Construction of a smart factory using technology such as automated systems of production suitable for the 4th Industrial Age. 8. Enforcement of specialized strategies to encourage fashion sewing companies, not only Seoul but also in other urban areas.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.22 no.4
• /
• pp.797-808
• /
• 2012

In smart work environment, a company provides employees a flexible work environment for tele-working using mobile phone or portable devices. On the other hand, such environment are exposed to the risks which the attacker can intrude into computer systems or leak personal information of smart-workers' and gain a company's sensitive information. To reduce these risks, the security administrator needs to analyze the usage patterns of employees and detect abnormal behaviors by monitoring VPN(Virtual Private Network) access log. This paper proposes a decision support system that can notify the status by using visualization and similarity measure through clustering analysis. On average, 88.7% of abnormal event can be detected by this proposed method. With this proposed system, the security administrator can detect abnormal behaviors of the employees and prevent account theft.

• Journal of the Society of Disaster Information
• /
• v.18 no.4
• /
• pp.754-768
• /
• 2022

Purpose: The purpose of this study is to derive improvements through user satisfaction analysis for the smart traffic safety system being applied to improve traffic safety. Method: A survey-based IPA analysis was used to derive system and service improvements for groups of drivers and pedestrians. Result: As a result of the analysis, both drivers and pedestrian groups showed that Quadrant 1(Keep up the Good Work) was 'Perception of risk information', and Quadrant 3(Low Priority) was 'Reliability of warning information'. On the other hand, 'AI display suitability', which was analyzed as Quadrant 1(Keep up the Good Work) in the driver group, was found to be Quadrant 3(Low priority) in the pedestrian group. Conclusion: Satisfaction factors for smart pedestrian safety systems may vary depending on users, and it is judged that user-centered system construction and service provision are necessary.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.6 no.12
• /
• pp.631-638
• /
• 2016

GNSS(Global Navigation Satellite System) such as GPS(Global Positioning System), GLONASS(GLObal NAvigation Satellite System) has been used in various fields for construction of geospatial inforamtion. But RTK or VRS method for high accuracy has some bad points like requirement of additional GNSS device and internet. So, this methods are difficult to take advantage of field survey. In this study, In this study, experiments using DGPS handheld devices and smart devices that can maximize mobility through was to suggest ways to improve the efficiency of field survey work. As a results, field survey work with smart devices is difficult to apply the limits of accuracy yet. On the other hand, DGPS has been found possible to determine the position accuracy within 1m. If DGPS is used in related work can greatly improve the efficiency of field survey work, which is currently much is done by hand, it is expected to serve as the basis for a structured GIS data management.