• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.5
• /
• pp.85-90
• /
• 2015

Work environments within the firm with a concept of mobile office is growing divided into two sections. It's Wi-Fi FMC(Fixed Mobile Convergence) field Which are implemented in a telephone service available from existing fixed-line service in the center of the smart phones and the EMS(Enterprise Mobility Service) field to make people will be able to handle PC the center of the information system within an enterprise using a smart phone instead of terminal facility connects to a system in the workplace and external. This paper developed FMC controller to allow execution IMS(IP Multi-Media Subsystem) services to complement the issues of the FMC corporation, telephony service associated. The controller includes FMC automatic enrollment services, voice quality enhancement of the mobile phone, anywhere within the firm on his mobile phone calls can provide mobility and is also implemented FMC LCR function that use status information from mobile soft-phone within the IP-PBX.

• Journal of Sensor Science and Technology
• /
• v.30 no.5
• /
• pp.342-348
• /
• 2021

For the characterization or failure analysis of electronic devices such as PCB (printed circuit boards), the most common method is the measurement of voltage waveforms with an oscilloscope. However, because there are many types of problems that cannot be detected by voltage waveform analysis, several other methods such as X-ray transmission, infrared imaging, or eddy current measurement have been applied for these analyses. However, these methods have also been limited to general analyses because they are partially useful in detecting physical defects, such as disconnections or short circuits. Fundamentally current waveform measurements during the operation of electronic devices need to be performed, however, commercially available current sensors have not yet been developed, particularly for applications in highly integrated PCB products with sub-millimeter fine pitch. In this study, we developed a highly sensitive PHR (planar hall resistance) magnetic sensor for application in highly integrated PCBs. The developed magnetic sensor exhibited sufficient features of an ultra-small size of less than 340 ㎛, magnetic field resolution of 10 nT, and current resolution of 1 mA, which can be applicable for PCB analyses. In this work, we introduce the development process of the magnetic sensing probe and its characteristic results in detail, and aim to extend this pin-type current probe to applications such as current distribution imaging of PCBs.

• Tribology and Lubricants
• /
• v.31 no.1
• /
• pp.6-12
• /
• 2015

This paper investigates the stick-slip characteristic of magnetorheological elastomer (MRE) between an aluminum plate and the surface of the MRE. MRE is a smart material and it can change its mechanical behavior with the interior iron particles under the influence of an applied magnetic field. Stick-slip is a movement of two surfaces relative to each other that proceeds as a series of jerks caused by alternate sticking from friction and sliding when the friction is overcome by an applied force. This special tribology phenomenon can lead to unnecessary wear, vibration, noise, and reduced service life of work piece. The stick-slip phenomenon is avoided as far as possible in the field of mechanical engineering. As this phenomenon is a function of material property, applied load, and velocity, it can be controlled using the characteristics of MRE. MRE as a soft smart material, whose mechanical properties such as modulus and stiffness can be changed via the strength of an external magnetic field, has been widely studied as a prospective replacement for general rubber in the mechanical domain. In this study, friction force is measured under different loads, speed, and magnetic field strength. From the test results, it is confirmed that the stick-slip phenomenon can be minimized under optimum conditions and can be applied in various mechanical components.

• The Korean Journal of Emergency Medical Services
• /
• v.23 no.3
• /
• pp.7-16
• /
• 2019

Purpose: The present study was conducted to identify the factors influencing the perfromance of the emergency medical technicians (EMTs) utilizing smart advance life support (SALS) and to provide appropriate feedback to improve SALS performance. Methods: The study subjects were recruited from 119 EMT members working in G city participating in SALS project. A total of 155 data were used in the analysis. Results: Of the three areas, the mean score of importance was the highest (4.53±0.48). followed by educational needs (4.24±0.66), and SALS performance (4.08±0.55). Importance was identified as a significant factor influencing SALS performance (β=.187, p<.047).The length of education. work scope. amd role of level 1 EMTs vary significantly depending on the type of qualifications they have as emergency medical professionals, while the supply of level 1 EMTs has already reached a point of saturation. Accordingly, the current regulation on allowing level 2 EMTs with at least three years of experience to take the level 1 EMT test presents serious inequity for students just graduating from their emergency medical services program. It is also a factor that degrades the professionalism of level 1 EMTs. Conclusion: Based on the results of this study, it was found that mediation and education programs need to be implemented to highlight the importance of the tasks performed in SALS situations in order to improve performance.

• IEIE Transactions on Smart Processing and Computing
• /
• v.6 no.3
• /
• pp.193-199
• /
• 2017

Instead of using only spatial features from a single frame for person re-identification, a combination of spatial and temporal factors boosts the performance of the system. A recurrent neural network (RNN) shows its effectiveness in generating highly discriminative sequence-level human representations. In this work, we implement RNN, three Long Short Term Memory (LSTM) network variants, and Gated Recurrent Unit (GRU) on Caffe deep learning framework, and we then conduct experiments to compare performance in terms of size and accuracy for person re-identification. We propose using GRU for the optimized choice as the experimental results show that the GRU achieves the highest accuracy despite having fewer parameters than the others.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.31 no.2
• /
• pp.107-111
• /
• 2018

In this study, we designed the temperature coefficient of resistance (TCR) and heat radiation properties of shunt fixed resistors by adjusting the atomic composition of a metal alloy resistor, and fabricated a resistor that satisfied the designed properties. Resistors with similar atomic composition of copper and nickel showed low TCR and excellent shunt fixed resistor properties such as short-time overload, rated load, humidity load, and high temperature load. Finally, we expect that improved sensor accuracy will be obtained in current-distribution-type shunt fixed resistor for IoT sensors by designing the atomic composition of the metal alloy resistor proposed in this work.

• Journal of Electrical Engineering and Technology
• /
• v.8 no.6
• /
• pp.1626-1636
• /
• 2013

Nowadays, a rapid development in wind power technologies is occurring compared with other renewable energies. This advance in technology has facilitated a new generation of wind turbines with larger capacity and higher efficiency. As the height of the turbines and the distance between turbines increases, the monitoring and control of this new generation wind turbines presents new challenges. This paper presents the architectural design, simulation, and evaluation of hybrid communication networks for a large-scale wind turbine (WT). The communication network of WT is designed based on logical node (LN) concepts of the IEC 61400-25 standard. The proposed hybrid network architectures are modeled and evaluated by OPNET. We also investigate network performance using three different technologies: Ethernet-based, WiFi-based, and ZigBee-based. Our network model is validated by analyzing the simulation results. This work contributes to the design of a reliable communication network for monitoring and controlling a wind power farms (WPF).

• The Journal of the Korea Contents Association
• /
• v.16 no.2
• /
• pp.251-256
• /
• 2016

The music video was produced by the multimedia type of a video clip by adding the image to match it with the release of audio recordings. mass production. Although originally it started as a means of promoting music as mere receive attention as the main content of the music cable broadcast M-TV began mass production. The 21st century has used the technology in various fields, including animated films and live action films, documentaries smart phone era. Among attempts to analyze their work tends to center the photographer and music video director Anton Corbijin and Stephen Sednaoui representing a photographic image of a music video

• Smart Structures and Systems
• /
• v.20 no.6
• /
• pp.697-708
• /
• 2017

Maintenance plays a critical role in the bridge industry, but actual practices show many limitations because of traditional, 2D-based information systems. It is necessary to develop a new generation of maintenance information management systems for more reliable decision making in bridge maintenance. Enhancing current work processes requires a BIM-based 3D digital model that can use information from the whole lifecycle of a project (design, construction, operation, and maintenance) through continuous exchanges and updates from each stakeholder. This study describes the development of a data scheme for maintenance of cable-stayed bridges. We implemented the proposed system for a cable-stayed bridge and discussed its effectiveness.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.37 no.5
• /
• pp.343-350
• /
• 2019

Map labels are the most recognizable map elements using the human visual system because they are essentially a natural language. In this study, an experiment was conducted using an eye-tracker to objectively record and analyze the response of subjects regarding visual attention to map labels. A primary building object was identified by analyzing visit counts, average visit duration, fixation counts, and the average fixation duration of a subject's gaze for an area of interest acquired using the eye-tracker. The unmarked rate of map labels in Google map, Naver map, and Daum map was calculated. As a result, this rate exceeded fifty-one percent, with the lowest rate recorded for Google map. It is expected that the results of this study will contribute to an increase in the diversity of research in terms of the spatial cognition approach for map labels, which is more helpful to users than the existing body of work on methods of expression for labels.