• Smart Structures and Systems
• /
• v.14 no.4
• /
• pp.659-678
• /
• 2014

The study is aimed at investigating the feasibility of a high TRL solution for a wing flap segment characterized by morphable camber airfoil and properly tailored to be implemented on a real-scale regional transportation aircraft. On the base of specific aerodynamic requirements in terms of target airfoil shapes and related external loads, the structural layout of the device was preliminarily defined. Advanced FE analyses were then carried out in order to properly size the load-carrying structure and the embedded actuation system. A full scale limited span prototype was finally manufactured and tested to: ${\bullet}$ demonstrate the morphing capability of the conceived structural layout; ${\bullet}$ demonstrate the capability of the morphing structure to withstand static loads representative of the limit aerodynamic pressures expected in service; ${\bullet}$ characterize the dynamic behavior of the morphing structure through the identification of the most significant normal modes. Obtained results showed high correlation levels with respect to numerical expectations thus proving the compliance of the device with the design requirements as well as the goodness of modeling approaches implemented during the design phase.

• Proceedings of the KIEE Conference
• /
• 2003.07b
• /
• pp.1270-1272
• /
• 2003

Smart card system is being used in many countries to improve access to their transportation systems. Especially for subway system that typically see high volumes of passengers at specific times of the days, it's critical to find a ray to collect fares without unnecessarily delaying passengers. The card consists of antenna, modulation and demodulation block, power supply module and memory. The antenna receives the power and data signal from reader. The FRAM is used as the inner memory. And it is a non-volatile memory and complements the problems, that is high consumption and low data processing speed, of using conventional EEPROM in the passive smart cart. In this paper, we analyze and design the RF passive smart card to apply to the fare collection for the subway gate system.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.3
• /
• pp.1674-1688
• /
• 2019

As environmental pollution and fossil fuel energy problems from fuel vehicle have occurred, the interest of electric vehicle(EV) has increased. EV industry and energy industry have grown dynamically in these days. It is expected that the next generation of primary transportation will be EV, and it is necessary to prepare EV infra and efficient energy management such as EV communication protocol, EV charge station, and smart grid. Those EV and energy industry fields are now on growth. Also, the study and development of them are now in progress. In this paper, distributed charge signal processing software for smart slow and quick EV charge is proposed and designed for dealing with EV charge demand. The software consists of smart slow and quick EV charge schedule engine and EV charge power distribution core. The software is designed to support two charge station types. One is normal EV charge station and the other is bus garage EV charge station. Both two types collect the data from EV charge stations, and then analyze the collected data. The software suggests optimized EV charge schedule and deliveries EV charge power distribution information to power switchboard system, and the designed software is implemented on embedded system. It is expected that the software provides efficient EV charge schedule.

• International Journal of Computer Science & Network Security
• /
• v.21 no.6
• /
• pp.107-118
• /
• 2021

The deployment of 5G is in full swing, with a significant yearly growth in the data traffic expected to reach 26% by the year and data consumption to reach 122 EB per month by 2022 [10]. In parallel, the idea of smart cities has been implemented by various governments and private organizations. One of the main objectives of 5G deployment is to help develop and realize smart cities. 5G can support the enhanced data delivery requirements and the mass connection requirements of a smart city environment. However, for specific high-demanding applications like tactile Internet, transportation, and augmented reality, the cloud-based 5G infrastructure cannot deliver the required quality of services. We suggest using multi-access edge computing (MEC) technology for smart cities' environments to provide the necessary support. In cloud computing, the dependency on a central server for computation and storage adds extra cost in terms of higher latency. We present a few scenarios to demonstrate how the MEC, with its distributed architecture and closer proximity to the end nodes can significantly improve the quality of services by reducing the latency. This paper has surveyed the existing work in MEC for 5G and highlights various challenges and opportunities. Moreover, we propose a unique framework based on the use of MEC for 5G in a smart city environment. This framework works at multiple levels, where each level has its own defined functionalities. The proposed framework uses the MEC and introduces edge-sub levels to keep the computing infrastructure much closer to the end nodes.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.6
• /
• pp.1279-1286
• /
• 2021

This study suggests the user's needs for a smart parking service that enables parking lot search and advance reservation service, and is a study on the user's preference selection model related to fees (reservation fee, penalty fee), etc. Two types of user preference models in the form of logit models were constructed by composing a response questionnaire for smart parking service. The first is a model for selecting a smart parking lot, which suggests a situation in which the probability of selection is higher than that of a general parking lot in the relationship between usage fee and cost. The second is a parking ticket reservation discount selection model, and the smart parking service selection probability was analyzed through the relationship model between the reservation amount and the penalty. It can be used as a design requirement that enables sophisticated and various types of smart parking service considering users' preferences.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.10a
• /
• pp.357-359
• /
• 2021

Railway system as a mass transportation is under progress to smart railway system beyond high speed and automation era. Communication network technology including 5G-R(5th Generation - Railway) mobile communication technology and information convergence technology of Big Data, Deep Learnig, AI(Artificial Intelliegnce) and Block Chain have to be used for implementation and operation of this smart railway system. In this paper, a communication network structure is suggested for this smart railway system. This suggested smart railway commnuication network structure is composed with layered structure of plane unit for safety operation of high speed railway, railway system management and customer services, and also have some complexed function of each plane. Results of this study can be used for smart railway communication network implementation, operation and managements, development of railway communication standards.

• International conference on construction engineering and project management
• /
• 2017.10a
• /
• pp.24-31
• /
• 2017

As the concept of sustainability becomes more and more popular, a large amount of literature have been recorded recently on intelligent green building and smart city (IGB&SC). It is therefore needed to systematically analyse the existing knowledge structure as well as the future new development of this domain through the identification of the thematic trends, landmark articles, typical keywords together with co-operative researchers. In this paper, Citespace software package is applied to analyse the citation networks and other relevant data of the past eleven years (from 2006 to 2016) collected from Web of Science (WOS). Through this, a series of professional document analysis are conducted, including the production of core authors, the influence made by the most cited authors, keywords extraction and timezone analysis, hot topics of research, highly cited papers and trends with regard to co-citation analysis, etc. As a result, the development track of the IGB&SC domains is revealed and visualized and the following results reached: (i) in the research area of IGB&SC, the most productive researcher is Winters JV and Caragliu A is most influential on the other hand; (ii) different focuses of IGB&SC research have been emerged continually from 2006 to 2016 e.g. smart growth, sustainability, smart city, big data, etc.; (iii) Hollands's work is identified with the most citations and the emerging trends, as revealed from the bursts analysis in document co-citations, can be concluded as smart growth, the assessment of intelligent green building and smart city.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.24 no.2
• /
• pp.129-135
• /
• 2014

In the paper, we propose a design method for the logistics transportation system using magnetic levitation that has a good characteristics without mechanical friction, noise and dust. The proposed transportation system consists of a levitation control system and a propulsion control system. Magnetic levitation system is an electromagnetic suspension system in which electromagnet generates magnetic attractive force and the attractive force pulls the rail. We design a PID controller for the current control of electromagnets. We use linear induction motors for propulsion of the proposed logistics transportation system and adapt the space vector PWM method for the propulsion control system. The proposed transportation system using magnetic levitation is verified performances through levitation and propulsion experiments.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.20 no.5
• /
• pp.130-145
• /
• 2021

As part of the Smart Seoul policy, the importance of using big urban data is being highlighted. Furthermore interest in the impact of transportation-related urban environmental factors such as PM10 and noise on citizen's quality of life is steadily increasing. This study established the integrated DB by matching IoT big data with transportation data, including traffic volume and speed in the microscopic Spatio-temporal scope. This data analyzed the impact of a spatial unit in the road-effect zone on environmental risk level. In addition, spatial units with similar characteristics of road traffic and environmental factors were clustered. The results of this study can provide the basis for systematically establishing environmental risk management of urban spatial units such as PM10 or PM2.5 hot-spot and noise hot-spot.

• Journal of the Korea Society of Computer and Information
• /
• v.27 no.1
• /
• pp.157-166
• /
• 2022

In this study, The goal is to analyze the feasibility of introducing a Piggyback system that can reduce the time and cost incurred by transshipment work and improve the transportation speed when transporting complex cargo by rail. To this end, the feasibility analysis methodology is reviewed through domestic and international literature review. In order to quantitatively derive the feasibility analysis values, a transportation database was applied to develop a freight transport simulation model and a freight demand prediction model for major freight transport O-D routes with a transportation distance of 200 km or more. As a result of analyzing economic feasibility by setting the analysis period to 15 years on the premise that the Piggyback System will be introduced on major cargo transport O-D routes in 2025, the NPV value was positive and the B/C value was 1.18, indicating that the Piggyback system was economical. The proposed research method can be meaningful data for establishing transportation policies that can improve the competitiveness of railroad transportation.