• Ocean Systems Engineering
• /
• 제4권4호
• /
• pp.279-291
• /
• 2014

Smart flanges are used for pipeline and riser repair in subsea. In a typical case in the gas export pipeline project, the end cap bolts of a 4inch smart flange were broken during operation, and in turn leakage occurred. This work presents the detail of three dimensional finite element analysis of the smart flange to support the observed end cap bolts failure. From finite element analysis it turns out that in the presence of external bending moment, an uneven contact distribution is present between seal and end cap, which in turn changes the uniform load distribution on bolts and threaten the integrity of bolts. On the other hand, 3D finite element analysis of interaction between pipeline and seabed is presented by means of Abaqus to explore the distribution of bending moment along the pipeline route. It is found that lateral buckling occurs in the pipeline which introduces large bending moment.

• Journal of Electrical Engineering and Technology
• /
• 제9권4호
• /
• pp.1240-1247
• /
• 2014

The applications of Distributed Generation (DG) in a smart distribution grid environment are widely employed especially for power balancing and supporting demand responses. Using these applications can have both positive and negative impacts on the distribution system. The sizing and location of their installations are the issues that should be taken into consideration to gain the maximum benefit from them when considering the economic aspects. This paper presents an application of the Bat Algorithm (BA) for the optimal sizing and siting of DG in a smart distribution power system in order to maximize the Benefit to Cost Ratio (BCR), subjected to system constraints including real and reactive power generation, line and transformer loading, voltage profile, energy losses, fault level as well as DG operating limits. To demonstrate the effectiveness of the proposed methodology and the impact of considering economic issues on DG placement, a simplify 9-bus radial distribution system of the Provincial Electricity Authority of Thailand (PEA) is selected for the computer simulation to explore the benefit of the optimal DG placement and the performance of the proposed approach.

• 한국유체기계학회 논문집
• /
• 제15권4호
• /
• pp.5-11
• /
• 2012

To identify the flow characteristics of the SMART reactor, a flow distribution model test and a numerical simulation are performed in KAERI. Among several part of the SMART reactor, the fuel assemblies are simulated using simulators because of the complexity. The geometries of the core in the SMART reactor and simulator are different, but some similarities are maintained such as the ratio of pressure drop in the vertical and cross directions. There are cross flow holes in each core simulator to reproduce the cross flow of SMART fuel assemblies. To know the flow characteristics of the cross flow, numerical analysis is performed. As the cross flow area is decreased, the pressure drop between inlet and outlet is decreased. Also, when the flow imbalance between two core simulators is constant, the cross flow area does not significantly affect the cross flow.

• Agribusiness and Information Management
• /
• 제6권2호
• /
• pp.13-23
• /
• 2014

The world is in the process of a structural change related to ICT convergence knowledge industries. ICT is leading to the creation of new products and services, and is making our lives more convenient, safer, and more efficient. In advanced countries, many studies have been conducted with the goal of developing new business models converged with ICT, and this is also the case in the food industry. Korea possesses world-leading ICT, and if this ICT is applied to the food industry, a world-class new business model can be developed. The u-Food System, which is in the process of development in Korea, is a next-generation food system that can allow food providers, consumers, and distributors to access various types of information about food products, including traceability, distribution, safety, quality, and freshness, and manage this information. It is a future food system that converges ICT, biotechnology and sensing technology with food. Based on the u-Food System, this paper will introduce the status of current smart quality distribution technologies that converge ICT (such as sensor tag, sensor network, LBS, GIS, and CDMA) with food technologies (such as traceability, quality, distribution management) to manage the safety and quality of fresh food in the distribution process.

• Journal of Electrical Engineering and Technology
• /
• 제9권6호
• /
• pp.1805-1811
• /
• 2014

After an occurrence of a fault in any distribution system, it is desired to limit the effects of the fault to smallest possible area and restore the un-faulty areas as soon as possible. Due the advancements in communication technologies, this task can be achieved in multiple efficient ways. In order to decrease the restoration time in the Smart Grid Distribution Management System (SDMS) a communication based algorithm is proposed in this paper, in which the restoration can be done during reclosing. This paper also analyzes various communication failures with power failures cases including the entire network of communication failures. Results of all these cases have been verified by doing simulations.

• Journal of Electrical Engineering and Technology
• /
• 제11권2호
• /
• pp.274-284
• /
• 2016

The increasing penetration of distributed energy resources on the distribution networks have brought a number of technical impacts where voltage and thermal variations have been identified as the dominant effects. Active network management in distribution networks aims to integrate distributed energy resources with flexible network management so that distributed energy resources are organized to make better use of existing capacity and infrastructure. This paper propose active solutions which aims to solve the voltage and thermal issues in a distributed manner utilizing a collaborative approach. The proposed algorithms have been fully tested on a distribution network with distributed generation units.

• 전기학회논문지
• /
• 제67권11호
• /
• pp.1455-1462
• /
• 2018

As the interests in eco-friendly energy has increased, the interests in Electric Vehicles(EVs) are increasing as well. Moreover, due to the government's economic support for EVs, penetration level of it has rapidly increased. These sharp increases, however, induce various problems in distribution system, such as voltage/frequency variations, peak demand increasement, demand control, etc. To minimize these possible matters, lots of research have conducted. Nevertheless, most of it assumed extremely important factors, such as numbers and charging patterns of EVs. It inevitably results in errors in their research, and thus make it difficult to prevent the possible matters from EVs. In this paper, therefore, we use actual EVs charging data from KEPCO, and analysis and deduction of it were conducted. The simulations were carried out for four aspect(season, region, purpose).

• 유통과학연구
• /
• 제18권5호
• /
• pp.15-23
• /
• 2020

Purpose: This research focused on the fact that the Internet platform is integral to IoT products such as Smart home and studied consumer buying decisions when products are sold bundled with internet service. Contrary to the sales strategies of telecommunication companies, some companies sell IoT products alone, for example Google, Kakao, and Naver. In this market situation, the sales strategies of Korean telecommunication companies were analyzed with bundling theory and technology acceptance model, then it was conducted to figure out which sales and distribution strategies could affect consumers' purchase behavior. Research design, data, methodology: Data was collected by149 questionnaires from groups who are familiar with IoT smart home systems, then exploratory factor analysis and regression were used to analyze the research model. Results: The results revealed that the perceived ease of use and the perceived usefulness affect the purchase intention of IoT-based products; however, this effect was not found in the case of bundled products. In other words, it is found that selling and distributing Internet services and IoT products together does not affect consumers' purchases. Conclusion: It is suggested that Korean telecommunications companies' existing sales and distribution strategies for IoT products need to be changed according to its characteristics.

• 유통과학연구
• /
• 제13권9호
• /
• pp.13-18
• /
• 2015

Purpose - This study investigates the effects of thought suppression on depression and uneasiness among college students likely to be influenced by smart phone addiction. Research design, data, and methodology - A total of 151 valid questionnaires were collected. The following analyses were conducted using SPSS 19.0 and AMOS 19.0: frequency, descriptive statistics, correlation, simple regression, and multiple regression. Results - Smart phone addiction increased uneasiness, depression, impulsiveness, and aggression. Moreover, uneasiness, depression, impulsiveness and aggression from smart phone addiction, had a negative influence on psychological wellbeing resulting in potential delinquent behavior. In addition, the addiction treatment relied heavily on drugs; therefore, such psychological treatment should be strengthened to control intermittent addiction. Conclusions - The results indicate that various kinds of research are needed to investigate personality and environmental factors that influence smart phone addiction. Additionally, studies on lessening smart phone addiction and living healthy lifestyles are needed. Moreover, psychological rehabilitation and treatment should be developed to lessen the rebound effect after thought suppression, to verify the effects of clinical application, and to prevent intermittent addiction.

• 한국산업융합학회 논문집
• /
• 제24권6_2호
• /
• pp.849-860
• /
• 2021

Recently, it is easy to find cases of 3D printing product, equipment, and materials in the architecture field. However, there is a lack of distribution environment where 3D printing products can be traded on an online platform or to access on-demand services in the architecture field. Therefore, in this study, a distribution platform development plan was proposed in consideration of the maturity level of the 3D printing distribution market in the domestic architecture field. For this purpose, the research was carried out as follows. First, by analyzing the case of the 3D printing distribution platform, the development stage of the distribution platform was set as three stages from the perspective of market maturity, platform development level, and sales/purchase experience level of suppliers and consumers. Second, the market maturity of the current domestic architecture field was evaluated as the first stage, and a distribution platform that could be implemented in the first stage was presented as a pilot. Third, we presented the first stage pilot, collected practical opinions on future construction plans through in-depth interviews, and presented detailed implementation plans for each stage necessary to achieve the second and third stage market maturity goals. Based on the roadmap derived from this study, it is expected that the domestic distribution platform market will grow step by step in the future and be utilized for business model development.