• Resources Recycling
• /
• v.11 no.2
• /
• pp.28-35
• /
• 2002

A study on the grinding characteristics of metal components in printed circuit boards (PCBs) scrap by a swing-hammer typeimpact mill was conducted. The PCBs scrap crushed to sizes less than 3 mm were pulverized to liberate metal components by the impact mill. The effect of rotation speed of hammer on the grinding characteristics was investigated. The particle size distribution and degree of liberation of metals such as copper and solder were measured. The effect of rotation speed and particle size on the shape sorting of metal Particles from milled PCBs was investigated using an inclined vibrating Plate. At the hammer speed of 61.3 m/s about 80% of the copper particles became larger than 297 $\mu$m while 90% of solder particles was smaller than 297 $\mu$m. In the shape sorting method, the recovery location becomes shorter as the rotation speed of hammer increases. The recovery location for particles larger than 297$\mu$m was shorter than for particles sized between 149$\mu$m and 297$\mu$m. As the recovery location becomes shorter, KI value increases towards unity while $\phi_{c}$ value decreases towards unity indicating the more roundness of metal particles.

• Journal of the Korean Society of Radiology
• /
• v.10 no.7
• /
• pp.503-510
• /
• 2016

Even though children are exposed to the same amount of radiation, their effective dose amount is higher than those of adults. Therefore, it is very important to reduce the amount of unnecessary radiation exposure because children have a higher radiosensitivity and a smaller body size than adults. In this study, the proposal to seek ways to reduce the amount of radiation is drawn by comparing and analyzing CT Dose Index(CTDI) on the pediatric head CT which was performed at the Busan regional hospitals, to the national diagnostic reference levels. For this, the pediatric head CT scan was conducted among the CT equipments that were installed in downtown Busan. From 2,043 children 10 years old or less who were referred to the pediatric head CT scan, targeting the 28 CT equipments in the 24 hospitals that transmit dose reports to PACS, were examined retrospectively. As a result, the average value of CTDIvol, computed tomography dose index (CTDI) of infant brain, across the hospital, was 31.18 mGy, with DLP of $444.73mGy{\cdot}cm$, which exceeded the diagnostic reference level. The lower the age, the more management is needed for radiation. However, the reality is that the CT examinations are being conducted with a dose that exceeds the reference level as the age of the aged is exceeded. For this purpose, the study seeks to determine the degree of doses of doses outside the diagnostic reference level and analyze the cause of the excess dose and devise measures to reduce the dose reduction.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.28 no.4
• /
• pp.419-424
• /
• 1983

Tensile strength and shattering losses of rice grains in a binder harvest and in a free falling test were examined. Indica$\times$Japonica varieties, Milyang 23, Hangangchal, and Taebaek, and a Japonica variety, Jinheung were used for this study. The average tensile strength varied with varieties, showing 0.743N (Newton) in Milyang 23, 1.078N in Hangangchal, 1.573 N in Taebaek, and 1.775 N in Jinheung. Extrapolation of the average tensile strength for the zero field loss of grain indicated about 1.7 N. Moisture content of straw at the cutting position in a binder harvest was 76.0 to 86.7% in culm and 76.7 to 77.8% in leaf sheath. The percent loss of grains occurring in binder barvest in the field was equivalent to the degree of shattering in the panicle-falling test onto the concrete floor at the height of about 40cm. The grain shattering (Y) was closely related to the impulse (X), the change in momentum: Y=-25.73+4958.4X, ($r^2$=0.987) for Milyang 23, Y=-12.97+2258.3X, ($r^2$=0.979) for Hanagangchal, Y=-5.24+840.4X, ($r^2$ =0.976) for Taebaek. The tensile strengths of grains and their variance varied singnificantly yearly even in the same variety. The magnitude of year-variance was somewhat smaller for the easily shattering variety.

• Journal of Biosystems Engineering
• /
• v.42 no.2
• /
• pp.104-111
• /
• 2017

Purpose: We have studied the necessary qualities of seedlings of some leafy vegetables for a riding-type two-row automatic transplanter. When seedlings are planted using a transplanter, long roots may be rounded in the bottom of the tray, and this can interfere with the separation of the seedlings. Uprightness related to leaf spread angle is an important quality for seedlings in mechanical planting. Methods: To select cultivars suitable for the transplanter, we compared varieties of Kimchi cabbage (Chukwang, Daetong, Whipalam and Namdo), head lettuce (Abi and Sensation), cabbage (YR Onnuri, YR Hogel, Harutama, and Ogane), and broccoli (Nicegreen and Earlyyou). To compare the effect of bed soil on root formation and growth, we used five types of soil: Chologi, Burger, Wonjomix, Bio, and Baroker with 2.6-3 L per tray. Growth increment and the degree of root formation were measured according to the RDA guidelines 25 days after sowing for Kimchi cabbage and head lettuce and 44 days after sowing for cabbage and broccoli. Conclusions: According to the plug tray, the optimum seedling age in both 128- and 200-hole trays was 28 days for Kimchi cabbage and 44 days for cabbage and broccoli. Head lettuce took 35 days in 128-hole trays and 31 days in 200-hole trays. Burger soil was most effective for root formation and growth of the four kinds of leafy vegetables; it appeared that smaller soil volume led to faster root formation.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.47 no.12
• /
• pp.904-912
• /
• 2019

We have studied the numerical analysis about the fragment ejection velocity and spray angle when the High Explosive warhead detonated at proximity distance at an aircraft. To study the physical quantities about the warhead components is very important to assessment the vulnerability of aircraft. Generally, the physical quantities about the components of a warhead such as the mass, length, diameter and charge to mass ratio are unknown. Therefore, it is required to estimate the physical quantities by using physical continuities of similar threats. The empirical formulas to understand the dependence among charge to mass ratio, length and diameter ratio were driven by using the physical parameters of similar threatening such as terrier, sparrow. As a result, we confirmed that the dead mass ratio was closed to 20% of warhead mass since the metal case of the proximity threat acts as a simple carrier. This implies that the effective length and diameter of High Explosive Compound is smaller than the length and diameter of warhead, and become a key to understand the large ejection gradient velocity and small spray angle of fragments within 6 degree.

• Korean Journal of Food Science and Technology
• /
• v.40 no.1
• /
• pp.1-7
• /
• 2008

Quality attributes of welsh onion (Allium fistulosum L.) as affected by harvest timing (November, December 2006 and January 2007) and storage temperature (5, 10 and $20^{\circ}C$) were investigated in terms of respiration rate, weight loss, decay rate, color, hardness, sensory quality. A higher respiration rate was found when welsh onions were harvested later and storage temperature was higher. A smaller weight loss was observed in welsh onions that were harvested in November and stored at temperature of $5^{\circ}C$, demonstrating a 9.35% reduction. In other words, there were a minimum difference of 2.15% and a maximum difference of 9.92% between the weight loss in test samples harvested in November and those of test samples harvested in other months. The decay rate was higher in welsh onions harvested in January. The degree of color was more stable in test samples kept at temperature of $5^{\circ}C$ than those kept at higher temperature (10 and $20^{\circ}C$). There were, however, no significant differences in color changes among test samples harvested at different times of the year. Thus color change is closely associated with temperature. Also, welsh onions were harvested in November and stored at temperature of $5^{\circ}C$ showed a good sensory quality.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.26 no.2
• /
• pp.205-220
• /
• 2010

Purpose : To analyze the effect of implant designs on insertion torque and stress by performing a comparative study on von Mises stress, torque and normal force through a three-dimensional finite element analysis. Materials and methods : Models of the screw type implant were used to model the implant as a form placed in the mandibular premolar region applying a three-dimensional finite element method. Screw type implant designs were classified into 4 types of parallel ones and 7 types of tapered ones. Other factors were simulated to represent clinical environment. Results : In parallel implant designs, higher and wider threads resulted in higher insertion torques and higher stress distributions. In tapered implant designs, changes in the taper led to remarkable differences in the insertion torques. It was difficult to determine a certain tendency of stress distribution around the implants since the stress level was too high around them. In tapered implant designs, smaller implants demonstrated lower insertion torques than the original type and were relatively less dependent on the degree of taper. Tapered implants showed higher insertion torques and higher stress distributions than parallel implants. Conclusion : According to this study, although the tapered implant demonstrated a higher insertion torque than the parallel implant, stress tended to be concentrated in the entire fixture of the tapered implant due to the inefficient stress distribution.

• Journal of The Korean Astronomical Society
• /
• v.49 no.5
• /
• pp.209-223
• /
• 2016

We present analyses of ~1250 variable sources identified in a 20 square degree field toward NGC 2784 by the KMTNet Supernova Program. We categorize the variable sources into three groups based on their B-band variability. The first group consists of 31 high variability sources with their B-band RMS variability greater than 0.3 magnitudes. The second group of medium variability contains 265 sources with RMS variability between 0.05 and 0.3 magnitudes. The remaining 951 sources belong to the third group of low variability with an RMS variability smaller than 0.05 magnitudes. Of the entire ~1250 sources, 4 clearly show periods of variability greater than 100 days, while the rest have periods shorter than ~51 days or no reliable periods. The majority of the sources show either rather irregular variability or short periods faster than 2 days. Most of the sources with reliable period determination between 2 and 51 days belong to the low-variability group, although a few belong to the medium-variability group. All the variable sources with periods longer than 35 days appear to be very red with B - V > 1.5 and V - I > 2.1 magnitudes. We classify candidates of 51 Cepheids, 17 semi-regular variables, 3 Mira types, 2 RV(B) Tauri stars, 26 eclipsing binary systems and 1 active galactic nucleus. The majority of long-term variables in our sample belong to either Mira or semi-regular types, indicating that long-term variability may be more prominent in post-main sequence phases of late-type stars. The depth of the eclipsing dips of the 26 candidates for eclipsing binaries is equivalent to ~0.61 as the average relative size of the two stars in the binary system. Our results illustrate the power of the KMTNet Supernova Program for future studies of variable objects.

• Korean Journal of Agricultural Science
• /
• v.7 no.2
• /
• pp.156-168
• /
• 1980

The air-center nozzles, being specially designed to supply air into the central part of water stream at seven levels of air volume, were tested for spray deposit pattern and flow-rate at each of the twelve pressure levels ranging from $0.35kg/cm^2$ (5 psi) to $6.33kg/cm^2$ (90 psi) in comparison with those of standard nozzles. The air-center nozzles produced comparatively more stable spray deposit patterns than the standard nozzles. The spray deposit patterns of the air-center nozzle were concentrated gradually in the central region with increase of air volume as a component of spray mixture. The degree of concentration of spray deposit on the central region from the air-center nozzle was higher than that of the standard nozzle, which suggested the possibility of obtaining farther travel distance spraying system at a given performance level. The flow rate of the air-center nozzle was not as much as that of the standard nozzle due to the air within certain limits. The rate of decrease of water flow became smaller with an increase in operating pressure although it changed rapidly in the beginning stage, ranging up to two or three percent of the air flow rate due to the compressive properties of air.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.43 no.5 s.311
• /
• pp.29-37
• /
• 2006

Thresholding is a fundamental approach to segmentation that utilizes a significant degree of pixel popularity or intensity. Otsu's thresholding employed the normalized histogram as a discrete probability density function. Also it utilized a criterion that minimizes the between-class variance of pixel intensity to choose a threshold value for segmentation. However, the Otsu's method has a disadvantage of repeatedly searching optimal thresholds for the entire range. In this paper, a simple but fast multi-level thresholding approach is proposed by means of extending the Otsu's method. Rather than invoke the Otsu's method for the entire gray range, we advocate that the gray-level range of an image be first divided into smaller sub-ranges, and that the multi-level thresholds be achieved by iteratively invoking this dividing process. Initially, in the proposed method, the gray range of the object image is divided into 2 classes with a threshold value. Here, the threshold value for segmentation is selected by invoking the Otsu's method for the entire range. Following this, the two classes are divided into 4 classes again by applying the Otsu's method to each of the divided sub-ranges. This process is repeatedly performed until the required number of thresholds is obtained. Our experimental results for three benchmark images and fifty faces show a possibility that the proposed method could be used efficiently for pattern matching and face recognition.