• Journal of the Korean Geotechnical Society
• /
• v.24 no.2
• /
• pp.77-86
• /
• 2008

The disturbance zone and measured values are affected by the size of the penetrometer. The local value may be measured by the smaller penetrometer. An ultra small Micro-Cone penetrometer (5mm in outer diameter) is designed and manufactured to characterize soil properties with minimum disturbance during penetration tests. The tip resistance is measured by using stain gauges attached near the Micro-Cone. In addition, the friction sleeve is adopted to effectively remove the skin friction from the tip resistance. Design concern includes the installation of stain gauges, circuits, penetration systems, penetration rate, sampling rate, operating temperature, and calibration. Application tests show that the clay interface, and the soil layers consisting of clay and sand are clearly detected by the Micro-Cone. Furthermore, the cone tip resistances measured by the Micro-Cone and the miniature cone (16mm in outer diameter) are similar. Note the resolution is much higher in the Micro-Cone. This study shows that the Micro-Cone may effectively detect the soil interface with high resolution, and with minimum disturbance.

• Geotechnical Engineering
• /
• v.13 no.4
• /
• pp.109-120
• /
• 1997

In the working stress conditions, the strain level in a soil mass experienced by existing structures and during construction is less than about 0.1-1%. In order to analyse the deformational behavior accurately, the in-situ testing technique which provides the reliable deformational characteristics at small strains, needs to be developed. The purpose of this paper is to measure the small-strain shear modulus of soils by using pressuremeter test(PMT). PMT is a unique method for assessing directly the in-situ shear modulus of soils with strain amplitude. For the accurate small strain measurements without initial disturbance effect, the unloading-reloading cycle was used and the measured modulus was corrected in view of the relevant stress and strain levels around the PMT probe during testing. Not only in the calibration chamber but in the field, PMT tests were performed on the cohesionless soils. The variation in shear modulus with strain amplitude ranging from 10-2% to 0.5% was reliably determined by PMT PMT results were also compared with other in-situ and laboratory test results. Moduli obtained from different testing techniques matched very well if the effect of strain amplitude was considered in the com pall son.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.34 no.3
• /
• pp.490-497
• /
• 2007

Odontoma is defined as a benign odontogenic tumor containing enamel, dentin as well as cementum and constitued 22% of all odontogenic tumors. Although the lesions are commonly asymptomatic, they may be discovered routine radiographic examination. Odontomas often cause disturbances in the eruption of teeth such as, impaction or delayed eruption, retention of primary teeth, or abnomalities in the position of the teeth such as tipping or displacement of adjacent teeth. Radiologically, odontomas manifest as a dense radiopaque lesion surrounded by a thin radiotransparent halo. However, in some cases, radiopacity was not quite clear and images of the teeth shadowed very tiny odontomas. And at early development stages of odontoma, calcification remains immature and is difficult to diagnose on radiographs. This suggests that when delayed eruption of the teeth is found, periapical radiographs should be taken to clarify whether any small area of radiopaque material exists. This case report shows tiny odontomas involving an impacted tooth and crowding and we remove the tiny odontoma surgically.

• Journal of Power System Engineering
• /
• v.21 no.1
• /
• pp.30-36
• /
• 2017

In robot industries, the request to obtain a high efficiency and accurately controlled electric actuator has been growing. Nevertheless, the effectiveness of electric actuators is significantly affected by the presence of factors such as nonlinearity, uncertain disturbance and unknown dynamics. Therefore, it makes difficult to derive an exact mathematical model of the controlled system. In this paper, a new method for easily recognizing and regenerating robot motions used in small size industries such as painting and welding parts is proposed. Instead of modeling the entire dynamic motion of the robot system, this method is based on the procedure of modeling and controller design for every arm individually. The proposed method does not require complex model and control system such that it gives easy working process to the small size industries. Based on this fact, in this research, the model and PID controller for every arm of the 3 DOF robot system are obtained separately. Some experimental results are implemented to validate the effectiveness of the proposed method.

• Journal of Environmental Science International
• /
• v.26 no.4
• /
• pp.457-466
• /
• 2017

The extensive construction works of container terminals progressed since 2006 was converted to small scaled construction works or reclaiming works since 2012 in Busan New Port area. To investigate changes in activity of otters with the change of construction work scales, the linear densities of spraints at 15 localities of 5 areas (I-V) near the Busan New Port construction areas were surveyed during the period from 2012 to 2016. As the results, the average linear density of spraints has a tendency to increase since 2014. That is, the linear densities of spraints have increased at the area II and IV where the reclaiming works have been progressed, although have decreased or unchanged in the areas I, III and V where small scaled construction works have been progressed. Based on the fact that there were habitats at the Honamdo in the area II and the Yeondo in the area IV, otters seemed to restore their activities around the habitats as the center regardless of the reclaiming works.

• Journal of Plant Biology
• /
• v.19 no.2
• /
• pp.49-61
• /
• 1976

A survey was conducted on the vegetation of Judo and Gamagseum in warm temperate zone of Southern Korea. They are covered with natural vegetation, evergreen forest dominated with Castanopsis cuspiadata in Judo and Machilus thunbergii in Gamagseum. Judo is a small island, ca. 1.75 ha, located within the Wando port. Since the flora of Wando including the Judo was reported in 1924, some investigator have reported evergreen trees of Judo. But the list of plant species of Judo is still unavailable. Gamagseum, located at the 15km morth of Judo, is a small island, ca. 1.45 ha, cosisting of two islands, Dae-o-do and So-o-do in low tide, and the report of its flora and any other survery on its is almost none. The vegetatons of Judo and Gamagseum are an example of natural forest vegetation occured rarely in warm temperate zone because of human disturbance in the southern coast zone of the Korean Peninsula. However, the ecological study of those vegetation has not ever been made, and the ecological or plant geographical situations of their vegetation is not clear. To determine the vegetation type, listing of plant species in the islands, calculation of basal area of trees over DBH=4.5cm, Raunkiaer's life form, leaf size class, Pte.-Q and etc., were studied. Total plant species of Judo was 110 species and that of Gamagseum was 99 species. In Judo, Castanopsis cuspidata was 1384 individuals among 2359 individuals over DBH=4.5cm, and in Gamagseum, Machilus thunbergii was remarkably abundant and Castanopsis cuspidata could not be found.

• Nuclear Engineering and Technology
• /
• v.55 no.7
• /
• pp.2395-2406
• /
• 2023

To study the influence of parameter uncertainty in small pressurized water reactor (SPWR) once-through steam generator (OTSG), the nonlinear mathematical model of the SPWR is firstly established. Including the reactor core model, the OTSG model and the pressurizer model. Secondly, a control strategy that both the reactor core coolant average temperature and the secondary-side outlet pressure of the OTSG are constant is adopted. Then, the uncertainty quantification method is established based on Latin hypercube sampling and statistical method. On this basis, the quantitative platform for parameter uncertainty of the OTSG is developed. Finally, taking the uncertainty in primary-side flowrate of the OTSG as an example, the platform application work is carried out under the variable load in SPWR and step disturbance of secondary-side flowrate of the OTSG. The results show that the maximum uncertainty in the critical output parameters is acceptable for SPWR.

• Journal of Aerospace System Engineering
• /
• v.17 no.6
• /
• pp.82-93
• /
• 2023

In this paper, nonlinear transonic flutter analyses of a composite missile fin considering the effect of delamination are conducted. An effective modal analysis methodology is adopted and verified with the experimental modal test data for laminated composite plates with delamination. Extended version of the in-house computational aeroelastic analysis program with the transonic small-disturbance (TSD) code is used in order to predict the flutter dynamic pressure of the delaminated composite fin models. In the subsonic, transonic, and supersonic flow regions, nonlinear time-domain flutter analyses are performed for various delamination conditions, and aeroelastic characteristics due to the delamination phenomena are examined in detail.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.11 no.2
• /
• pp.116-124
• /
• 2008

Current paper investigates the dynamic behavior and stability of an infrared search and track subjected to external disturbance having gimbal structure with three rotating axes keeping constant angular velocity in the azimuth direction. Euler-Lagrange equation is applied to derive the coupled nonlinear dynamic equation of motion of infrared search and track and the characteristics of dynamic coupling are investigated. Two equilibrium points with small variations from the nonlinear coupling system are derived and the specific condition from which a coupled equation can be three independent equations is derived. Finally, to examine the stability of system, Lyapunov direct method was used and system stability and stability boundaries are investigated.

• Journal of Chest Surgery
• /
• v.13 no.4
• /
• pp.448-454
• /
• 1980

The juxtaposition of atrial appendage may possibly be diagnosed by angiography recently, and it is widely regarded as an ominous sign of severe cyanotic congenital heart disease. However, it is apparently rare congenital cardiac anomaly in which the atrial appendages lie side by side, both to the left or right of the great arteries, known as left or right juxtaposition of the atrial appendages. Juxtaposition of the atrial appendages has no functional significance, since it does not, itself, cause any hemodynamic disturbance. But it`s presence always indicates the coexistence of other major cardiac anomalies. In review of literatures TGA and VSD are invariable present, and ASD is common. Other anomalies, such as, tricuspid atresia, pulmonary outflow that, obstruction bicuspid pulmonic valve, persistent SVC etc. are relatively high incidence. In this report, we present one case of 6 year old female child having left juxtaposition of atrial appendage combined with TGA [D-looping, D-transposition], TAPVD, large ASD, small VSD, and vertical vein.