• 한국의류학회지
• /
• 제17권2호
• /
• pp.177-196
• /
• 1993

By cluster sampling measurements, passing months of pregnancy according to changes of pregnant women body forms. On the basis of the above mentioned data, sizes of pregnant women clothes were decided. The results are as follows. 1. By cluster sampling measurements, sixty-nine items of apparel were obtained during the three different periods of pregnancy. They included the mean and standard deviation of body form measurement and the minimum and maximum values (Chart 3-4). The results of these surveys made it possible to notice the changes of pregnant womens' physical characteristics, i. e., the increased physical proportions: frontal waist area, umbilicus width, abdominal girth, crotch length, the length of the nipple, and body weight and the decreased proportions: omphalos height, perineum dimension. There was little change in the rear parts of the body. 2. The analized results of principle factors for body form measurements by cluster measurements produced seven major factors for which the proper values were over 1.0. They were: form factor, pregnancy factor, posture factor, breast formation factor, rear body formation factor, and nipple to nipple breadth. 3. In deciding garment sizes of pregnant women, four different sizes were established; small, medium, large, and extra-large according to the third, fifth, eighth, and tenth month of pregnancy. The measurement value of each item was produced by estimate.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.975-977
• /
• 2004

According to thin and light form-factor and additional function of today's electronic devices, it is required to decrease the pattern pitch of FPC. The high density demand is more and more important trend especially, for small size LCD module. Based on this requirement, the manufacturing process is advancing from subtractive method to super subtractive method.

• 대한교통학회지
• /
• 제14권1호
• /
• pp.29-42
• /
• 1996

Among trip distribution models, The BPR type Gravity Model is the one which is the most widely used. The key issue associated with this model is a functional form of friction factor which should be calibrated in the process, and interpretation for socioeconomic factor known as K-factor(Kij) which is used to adjust the difference between observed zone-to-zone trips and the estimated trips. In this study, the BPR type Gravity Model has been fitted to 1990 O/D data for Seoul. Two type of function form for friction factor has been employed : one is a form of Generalized function and the orther is UTP function. With above two function, the parameters for travel distance(Skin-tree) are prepared. The relationship between socioeconomic factor and trips is identified by calculating and analyzing the characteristics of Kij. Consequently, both of the friction factor functions are statistically signified. However, it show an overestimation tendency when estimated with UTP function. It is found that the Generalized function is suitable for the city of Seoul, and also, in case there are a lot of trips correlatively, the socioeconomic factor is close to 1, on the other hand if it's small, it shows a bias which is dispersed around 1.

• 전자통신동향분석
• /
• 제30권1호
• /
• pp.65-76
• /
• 2015

스마트폰의 보급에 따른 대용량 멀디미디어 서비스의 폭발적인 수요 증가에 따라데이터센터의 100Gb/s 광트랜시버에 대한 수요는 2017년을 기점으로 10Gb/s를 추월하여 2018년 데이터콤 전체 시장의 50% 이상을 차지할 전망이다. 한편, 데이터센터의 소비전력 및 시스템 집적도 증가를 위해 광트랜시버의 Form-factor는 CFP(40G/100G Form-factor Pluggable)에서 QSFP28($4{\times}28G$ Quad Small Form-factor Pluggable)로 약 1/14배 소형화될 전망이며, 이에 따른 광트랜시버 구성 부품의 집적도는 높아지고 소비전력은 현재 대비 1/9로 낮아져야 한다. 본고에서는 소형화 및 저전력화를 위한 광트랜시버의 표준화 및 기술동향과 국내외 시장동향에 대해 기술한다.

• 소성∙가공
• /
• 제14권5호
• /
• pp.477-481
• /
• 2005

Wafer scale micro mirror array with high surface quality for small form factor (SFF) optical pick-up was fabricated by micro UV-molding. To replicate micro mirror array for SFF optical pick-up, a high- precision mold was fabricated using micro-machining technology. Wafer scale micro mirror array was UV-molded using the mold and then the process was optimized experimentally. The surface flatness and roughness of UV-molded micro mirror array were measured by white light scanning interferomety system and analyzed the transcribing characteristics. Finally, the measured flatness of UV-molded micro mirror away for SFF optical pick-up, which was fabricated in the optimum processing condition, was less than 70nm.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 춘계학술대회논문집
• /
• pp.173-176
• /
• 2004

Nowadays, mobile devices are very common equipments such as mobile phone, PDA, etc. These equipments need information storage devices. Optical storage devices have more advantages than other storage devices, but it is not free from shock situation like dropping by user's mistakes. A complete model of a Small Form Factor Optical(SFFO) disk drive subject to shock loads is developed to investigate the response of the pickup/disk interface. With this model, we can simulate the drop test and consider the matters of shock simulation using commercial software(Ansys/LS-Dyna).

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 춘계학술대회 논문집
• /
• pp.47-50
• /
• 2005

In this study, micro mirror array for small form factor optical pick-up was replicated by micro UV-molding. First, mold for micro mirror array was fabricated using micromachining. Also, to analyze the characteristics of the surface quality, flatness of replicated mirror surface were measured by white light scanning inteferometry system. The results show that the micro mirror array with a sufficient surface quality can be obtained by polymer replication process.

• 반도체디스플레이기술학회지
• /
• 제19권4호
• /
• pp.1-5
• /
• 2020

By adapting black body leadflame and thin film type Green A filter, we successfully demonstrated night vision imaging system (NVIS) Green A compatible LED. Fabricated NVIS compatible LEDs show small form factor compared to that of commercialized NVIS compatible LED. Especially, NVIS radiance and chromaticity of MIL-STD-3009 specification can be satisfied simultaneously and easily by controlling the color temperature of the white LED as well as the concentration of the Green A dye and the thickness of the Green A filter. The optimal dye concentration of the NVIS Green A filter is expected to be about 1 wt%. The results of this study are expected to contribute to miniaturization, weight reduction and localization of avionic display and lighting devices.

• 한국의류학회지
• /
• 제29권8호
• /
• pp.1079-1091
• /
• 2005

The purpose of this study was to point out the unification of the size of swimming headgear by measuring detailed measurement of head ferm and systematizes the head form. A total of 300 male and female Korean adults aged from 18 years old to 35 years old were measured through the direct measurement method. This study attempted to identify the head form of male and female adults using measurement data and the head form was classified through factor analysis and cluster analysis. (1) Based on the fact that this study especially focuses on the size of swimming headgear, factor analysis was performed far both direct measurements with hair and without hair. For the measurements with hair, seven factors were extracted. They were head thickness factor, head width factor, width of side head factor, height of back head factor, length of front head factor, circumference of front head factor, thickness of front head factor and head height factor. They explained the $70.95\%$ of the measurements. (2) The cluster analysis was executed to classify the somatotype of the korean head form on the basis of similarity. According to the cluster analysis result, the measurements with hair categorized types, 'Woman's long-hair type', 'Small type', 'Long and flat type', 'Large type'. (3) Head circumference B and Left tragion - Vertex - Right tragion circumference which are generally length and width in choosing swimming headgear size were selected as measurement items far size of swimming headgear. Direct measurements and sizes of four swimming headgear with different materials taking into account their elongation rate were also compared.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.65-69
• /
• 2004

The small form factor optical data storage devices are developing rapidly nowadays. Since it is designed for portable and compatibility with flash memory, its components such as disk, head, focusing actuator, and spindle motor should be assembled within 5 m thickness. The thickness of focusing actuator is within 2 mm and the total working range is $+/-100{\mu}m$, with the resolution of less than $1{\mu}m$. Since the thickness is limited tightly, it is hard to place the yoke that closes the magnetic circuit and hard to make strong flux density without yoke. Therefore, Halbach array is adopted to increase the magnetic flux of one side without yoke. The proposed Halbach array type focusing actuator has the advantage of thin actuation structure with sacrificing less flux density than conventional magnetic array. The optical head unit is moved on the swing arm type tracking actuator. Focusing coil is attached to swing arm, and Halbach magnet array is positioned at the bottom of deck along the tracking line, and focusing actuator exerts force by the Fleming's left hand rule. The working range and resolution of focusing actuator are analyzed with FEM and experiment.