• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.11a
• /
• pp.227-231
• /
• 2004

Technological advance in information technology has sparked the necessity of small form factor (SFF) optical disk for mobile devices. Small form factor optical disk is highly anticipated to be a next generation storage device because it can be used for a cost-effective way compared with solid state memory. For the application to the 5 mm height small-form-factor optical disk drive, we have presented an optical flying head and swing arm actuator. In this study, we propose a small 1-axis actuator for compensating ficus error and SA due to the variation of cover-layer thickness in the cover-layered small optical disk. The main design issues of the 1-axis actuator are the realization of compact structure and the new support structure of the actuator: Finally, the compensating principle and performance of the 1-axis actuator will be explained.

• Fashion & Textile Research Journal
• /
• v.19 no.5
• /
• pp.635-645
• /
• 2017

The industry of character toys is increasing and new characters are constantly being developed. However, the development of 2D cover patterns for toys is time-consuming due to frequent pattern modifications made through trial and error. Studies are now underway to obtain 2D clothing patterns from 3D body data, however, little research has been done on 2D pattern of character toys. This study suggests efficient guidelines to develop 2D cover patterns with a reasonable accuracy and processing time. Two 3D models of a dog and rabbit were used to develop 2D cover patterns. Independent variables of this study are set as 3 levels of triangle area (small, medium, and large) that influence the efficacy of 3D and 2D pattern development. The determination of the appropriate triangular area was based on the area and shape change of the 2D pattern. A medium or large triangle area was shown to be suitable for a character dog with a smooth curved surface. However, the appropriate triangle area was small if the characteristics of the curved surface are complicated as in the case of rabbit. The head of a dog (a double-curved surface) and the curved forepaw of a rabbit (a triangular area) should be small when the characteristics of the curved surface (such as the hind leg of a rabbit having a large convex surface and a small surface area) are complicated. Grouping by 3D surface characteristics could be a suitable guideline for the triangle area selection.

• Korean Journal of Computational Design and Engineering
• /
• v.10 no.5
• /
• pp.375-379
• /
• 2005

Durability of rubber dust cover in the ball joint for automotive suspension parts is analyzed by FEM and compared with experimental data. Upper open area of ball joint is sealed by dust cover for preventing outflow of the lubricating oil and intrusion of send, dust, water, etc. This rubber cover undergoes repeated loadings such as tension and compression while the car is running. Analysis about rubber material needs to consider every kinds of nonlinearities arise in finite element analysis, which are geometric nonlinearity due to large displacement and small strain, materially nonlinearity and nonlinear boundary condition such as contact. The deformation behavior of dust cover is analysed by using the commercial finite element program MARC. In the study, this program could solve these kinds of nonlinear analysis accurately. Finite element model of dust cover is considered as 3-dimensional half model based on 2-dimensional axisymmetric model. Material property of rubber is modeled by Ogden model and input data for calculation takes form uniaxial tension test of rubber specimen. The final object of the study is obtaining the design specification of dust covers and the result of analysis should be a useful data to design of rubber cover.

• Journal of the Korean Mathematical Society
• /
• v.46 no.1
• /
• pp.51-58
• /
• 2009

Let R be a ring. A right R-module M is called perfect if M possesses a projective cover. In this paper, we consider the relationship between the class of perfect modules and other classes of modules. Some known rings are characterized by these relationships.

• Water for future
• /
• v.10 no.2
• /
• pp.101-111
• /
• 1977

The analysis performed here is aimed to increase the familiarity of hydrologic process especially for the small basins which are densely gaged. Kyung An and Mu Shim river basins are selected as a represectative basin according to the criteria which UNESCO has establisheed back in 1964 and being operated under the auspice of Ministry of Construction. The data exerted from these basins is utilized for the determination of the characteristics of precipitation and runoff phenomena for the small basin, which is considerred as a typical Korean samll watershed. The methodology developed by Soil Conservation Service, USA for determination of runoff value from precipitation is applied to find the suitability of the method to Korean River Basin. The soil cover complex number or runoff curve number was determined by considering the type of soil, soil cover, land use and other factor such as antecent moisture content. The averag values of CN for Kyung An and Mushim river basins were found to be 63.9 and 63.1 under AMC II, however, the values obtained from soil cover complex was less than those from total precipitation and effective precicpitation by 10-30%. It may be worth to note that an attention has to be paid in the application of SCS method lo Korean river basin by adjusting 10-30% increase to the value obtained from soil cover complex. Finally, the design flood hydrograph was consturcted by employing unit hydrograph technique to the dimensionless mass curve. Also a stepwise multiple regression was performed to find the relationship between runoff and API, evapotranspiration rate, 5 days antecedent precipitation and daily temperature.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.1292-1294
• /
• 2003

This paper presents the results of research and analysis with the satellite-derived snow data. It provides the main climatic characteristics of snow cover in China and shows the variation and distribution of snow in regions of Xinjiang, Inter Mongolia and Tibet plateau. The study reveals the vicissitude periods of winter snow cover in Tibetan Plateau by using wavelet analysis with the data from 1980 to 2001. It has about 10 years large period and 3-5 years small period. The analysis shows that the extension of snow increased in recent years in Xinjiang. The results of analysis proves the relationship between winter snow cover in Tibetan Plateau and next summer precipitation in the middle and lower reaches of the Yangtze River. They have good correlation.

• Journal of the Korean Society of Industry Convergence
• /
• v.26 no.5
• /
• pp.945-952
• /
• 2023

In this study, the sand casting process was applied to design the gating system and perform casting simulation in order to domestically produce the submarine mast cover. Based on simulation results, casting experiments were conducted to produce a soundness prototype. The design concept of the mast cover's gating system was based on the design of bell casting. By arranging eight tower-type gates in a circle at 45° intervals, the flow of melt flowing into each gate was uniform and did not mix with each other, and the velocity of melt was also uniform. The mast cover made of Ni-Al-Bronze alloy has no unfilled parts. However, small porosities and flow marks occurred on the surface in several places. Yield strength and ultimate tensile strength are 279.3 MPa and 675.7 MPa, respectively, and elongation is 21.2%.

• Journal of Conservation Science
• /
• v.36 no.6
• /
• pp.440-455
• /
• 2020

This study aims to examine the material characteristics of bowls and compare the making techniques of flat cup with cover and jar coffin from the Oryang-dong kiln site, Naju. Bowls, the most frequently excavated small pottery have similar material characteristics, including gray surface, fine-grained texture, and small-sized tempers such as quartz and feldspar, regardless of the excavation slopes. However, the firing temperature of the bowls mostly ranges from 950 to 1,100 ℃. It is estimated that the bowls had formalized making techniques, owing to the similar material composition and firing technique regardless of the excavation slope. The flat cups with cover have similar texture and mineral phases, except their poorly sorted inclusions. However, the jar coffins contain not only fine-grained minerals but also medium-grained quartz, feldspar, and biotite, showing a relatively wide range of firing temperatures. According to the geochemical results of pottery by type, it is assumed that chemical compositions are classified into two groups: small pottery(bowl and falt cup with cover) and jar coffins. In conclusion, small potteries such as bowls and flat cups with cover were made by removing the heavy minerals from raw materials, whereas jar coffins were made by adding medium-grained minerals to raw materials to maintain and support their structures, despite the same source materials. In addition, it is presumed that pottery making proceeded by selecting the source materials, preparing according to their use and controlling the firing temperature and environment.

• Korean Journal of Remote Sensing
• /
• v.24 no.5
• /
• pp.507-515
• /
• 2008

Many studies have generally used a large number of pure pixels as an approach to training set design. The training set are used, however, varies between classifiers. In the recent research, it was reported that small mixed pixels between classes are actually more useful than larger pure pixels of each class in Support Vector Machine (SVM) classification. We evaluated a usability of small mixed pixels as a training set for the classification of high-resolution satellite imagery. We presented an advanced approach to obtain a mixed pixel readily, and evaluated the appropriateness with the land cover classification from IKONOS satellite imagery. The results showed that the accuracy of the classification based on small mixed pixels is nearly identical to the accuracy of the classification based on large pure pixels. However, it also showed a limitation that small mixed pixels used may provide insufficient information to separate the classes. Small mixed pixels of the class border region provide cost-effective training sets, but its use with other pixels must be considered in use of high-resolution satellite imagery or relatively complex land cover situations.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.05a
• /
• pp.778-781
• /
• 2002

Durability of rubber dust cover in the ball joint for automotive suspension parts were analyzed by FEM and compared with experimental data. Upper open area of ball joint is sealed by dust cover for preventing outflow of the lubricating oil and intrusion of send, dust, water, etc. This rubber cover undergoes repeated loadings such as tension and compression while the car is running. Analysis about rubber material needs to consider every kinds of nonlinearities arise in finite element analysis, which are geometric nonlinearity due to large displacement and small strain, materially nonlinearity and nonlinear boundary condition such as contact. So in the study, the deformation behavior of dust cover was analysed by using the commercial finite element program MARC. This program could solve these kinds of nonlinear analysis accurately. Finite element model of dust cover is considered as 3-dimensional half model based on 2-dimensional axisymmetric model. Material property of rubber was modeled by Ogden model and input data for calculation takes form uniaxial tension test of rubber specimen, The final object of the study is obtaining the design specification of dust covers and the result of analysis should be a useful data to design of rubber