• Journal of the Korean Geographical Society
• /
• v.31 no.2
• /
• pp.309-316
• /
• 1996

With the increased availability of spatial datasets and advances in data processing technologies, the last 50 years witnessed remarkable progress in the area of cartography and geoinformatics. Researchers in Korea involved in these area, however, were exposed to the new development only recently. They are now at the stage of absorbing the works of leading countries. There have been only a small number of research papers on the area of conventional cartography land use/vover mapping, mapping of distribution of slope calsses, and topographic models. It is only recently that the research scope be extended to computer-assisted cartography and Geographic Information System (GIS). The majority of research papers have been focused on the applications of GIS. Recently, a group of researchers begin to address some of the fundamental issues in GIS such as formal models, standization, data structure, spatial analysis and networking.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.7
• /
• pp.1424-1432
• /
• 2015

As the wireless communication technologies are being studied for application to maritime communication networks in a fusion of marine industries and IT technology, interference coordination techniques have been studied in the maritime heterogeneous networks. In this paper, we develop a simulator for measuring, verifying and evaluating performance of a maritime heterogeneous network. Unlike other previous simulators, the developed simulator applies enhanced inter-cell interference coordination (eICIC) that are being introduced in the 3GPP Release 10 for mitigating the cross-tier interference between ships. Furthermore, we investigate the effects of almost blank subframes (ABS) and cell range expansion (CRE) on the throughput of small cells in maritime heterogeneous networks by using the developed simulator.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.4A
• /
• pp.307-314
• /
• 2010

In this paper, a receive diversity combining technique is proposed for single-carrier frequency division multiple access (SC-FDMA)-based cooperative relay systems when discrete Fourier transform (DFT) spreading sizes for mobile station (MS) and relay station (RS) are different. The proposed technique is composed of a DFT spreading size adjustment block, a phase rotation compensation block, a channel phase compensation block, and a receive diversity combining block. The proposed technique is robust to multipath channels and can be operated with a relatively small computational complexity because receive diversity combining is performed with scalar operations in the frequency-domain. It is shown by computer simulation that the proposed receive diversity combining techniques achieve a performance gain over the conventional maximal ratio combining (MRC) techniques for SC-FDMA-based cooperative relay systems.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.6C
• /
• pp.444-449
• /
• 2008

Selected mapping is well-known scheme for peak to average power ratio(PAPR) reduction in orthogonal frequency multiplexing(OFDM) systems. In this paper, we proposed a new scheme for generating a set of candidate transmission sequences. In conventional SLM, candidate sequences were generated by rotating the phases of the frequency domain OFDM M-ary symbols but in proposed scheme, candidate sequences are generated by multiplying the m-sequences with data in bit format of OFDM signals. Computer simulation results show that, as compared to the conventional SLM scheme, the proposed approach has better PAPR reduction performance and especially in case of OFDM systems which has small number of subcarriers has better performance than large ones.

• Journal of Digital Contents Society
• /
• v.15 no.6
• /
• pp.737-743
• /
• 2014

For single image super resolution (SR), interpolation based and example based algorithms are extensively used. The interpolation algorithms have the strength of theoretical simplicity. However, those algorithms are tending to produce high resolution images with jagged edges, because they are not able to use more priori information. Example based algorithms have been studied in the past few years. For example based SR, the nearest neighbor based algorithms are extensively considered. Among them, neighbor embedding (NE) has been inspired by manifold learning method, particularly locally linear embedding. However, the sizes of local training sets are always too small. So, NE algorithm is weak in the performance of the visuality and quantitative measure by the poor generalization of nearest neighbor estimation. An improved NE algorithm with Support Vector Regression (SVR) was proposed to solve this problem. Given a low resolution image, the pixel values in its high resolution version are estimated by the improved NE. Comparing with bicubic and NE, the improvements of 1.25 dB and 2.33 dB are achieved in PSNR. Experimental results show that proposed method is quantitatively and visually more effective than prior works using bicubic interpolation and NE.

• KIPS Transactions on Computer and Communication Systems
• /
• v.7 no.1
• /
• pp.19-26
• /
• 2018

Recently, DDoS amplification attacks using servers that provide Microsoft Active Directory information using CLDAP protocol are increasing. Because CLDAP is an open standard application that allows a wide range of directory information to be accessed and maintained in a network, the server is characterized by its openness to the Internet. This can be exploited by the Reflector server to perform an amplification attack by an attacker. In addition, this attack can be attacked with a packet that is amplified 70 times more than the conventional UDP-based flooding attack, and it can block service to small and medium sized server. Therefore, in this paper, we propose an algorithm that can reduce the DDoS amplification attack using CLDAP server and implement the corresponding CLDAP server environment virtually, and implement and demonstrate the corresponding algorithm. This provides a way to ensure the availability of the server.

• Restorative Dentistry and Endodontics
• /
• v.26 no.2
• /
• pp.134-140
• /
• 2001

The polymerization shrinkage of composite resins is an important drawback although the composites have many advantages-more esthetic and conservative than metallic restoratives etc. The purposes of this research were to develop a new measurement method and to manufacture an instrument that can measure the initial dynamic volumetric shrinkage of composite resins during polymerization. The instrument was basically an electromagnetic balance that constructed with a force transducer using position sensitive photo detector(PSPD) and a negative feedback servo amplifier of proportional-derivative(PD) controller. The volumetric change of composites during polymerization was detected continuously as buoyancy change in distilled water by means of Archimedes's principle. It was converted to continuous electrical voltage signal in real time. The signal was properly conditioned and filtered and then it was stored in computer by a data acquisition(DAQ) board. By using this electronic instrument. the dynamic patterns of the polymerization shrinkage of eight commercial(Z-100, DenFil, AeliteFil, Z-250, P-60, SureFil, Synergy compact, and Tetric ceram) composite resins were measured and compared. The results were as follows. 1. From this project of developing instrument, the ability has been achieved that can acquire and process data of electrical signal transformed from various physical phenomenon by using temperature, displacement. photo. and force transducer. As a consequence, the instrumentation and measurement system used to analyze the physical characteristics of various dental materials in dental research field can be designed, manufactured and implemented in lab. 2. This instrument has some advantages. It was insensible to temperature change and could measure true dynamic volumetric shrinkage in real time without complicated process. It showed accuracy and high precision results with small standard deviation. 3. The polymerization shrinkage of composites was significantly different between brands and ranged from 2.47％ to 3.89％, The order of polymerization shrinkage was as follows, in order of increasing shrinkage, SureFil, P60, Z250, Z100, Synergy compact. DenFil, Tetric ceram, and AeliteFil. 4. The polymerization shrinkage rate per unit time, dVol％/dt, showed that the instrument can provide an indirect research method for polymerization reaction kinetics.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.5
• /
• pp.1221-1230
• /
• 1997

In this study, the performance of a parallel file system(N-PFS), which is inplemented using conventional disks as disk arrays on a Workstation Cluster, is analyzed by using analytical method and adtual values in experiments.N-PFS can be used as high-performance file sever in small-scale server systems and effciently pro-cess massive data I/Os such as multimedia and scientifid data. In this paper, an analytical model was suggested and the correctness of the suggested was verified by analyzing the experimental values on a system.The result of the appropriate stping unit for processing massive data of the Workstation Cluster with 8 disks is 64-128Kbytes and the maximum throughput on it is 15.8 Mbytes/ses.In addition, the performance of parallel file system on massive data is bounded by the time required to copy data between buffers.

• The Journal of the Korea Contents Association
• /
• v.8 no.9
• /
• pp.42-54
• /
• 2008

In recent years, embedded systems have been expanding their application domains from traditional embedded systems such as military weapons, robots, satellites and digital convergence systems such as celluar phones, PMP(Portable Multimedia Player), PDAs(Personal Digital Assistants) to Next Generation Personal Computers(NGPCs) such as eating PCs, wearable computers. The NGPCs are network-based, human-centric digital information devices diverged from the traditional PCs used mainly for document writing, internet searching and database management. Wearable computers with battery capacity and memory size limitations have to use real-time operating systems with small footprints and low power management techniques to provide user's QoS in spite of hardware constraints. In this paper, we have designed and implemented a low-power RTOS (called eRTOS) for wearable computers. The implemented eRTOS has 18KB footprints and the dynamic power management and the device power management schemes are adapted in it. Experimental results with wearable computer applications show that the low power techniques could save energy up to 47 %.

• Journal of KIISE:Computer Systems and Theory
• /
• v.28 no.12
• /
• pp.674-684
• /
• 2001

This paper presents the SIC(Size-Interval-Count) prefetching scheme that can record the file access patterns of applications within a relatively small space of memory based on the repetitiveness of the file access patterns. Several knowledge-based prefetching methods were recently introduced, which includes high correctness in predicting future accesses of applications. They records the access patterns of applications and uses recorded access pattern information to predict which blocks will be requested next. Yet, these methods require to much memory space. Accordingly, the proposed method then uses the recorded file access patterns, referred to as "SIC access pattern information", to correctly predict the future accesses of the applications. The proposed prefetching method improved the response time by about 40% compared to the general file system and showed remarkable memory efficiency compared to the previously knowledge-based prefetching methods.