• 전기전자학회논문지
• /
• 제18권3호
• /
• pp.335-340
• /
• 2014

친환경 및 에너지 효율에 대한 관심이 증대되고 있는 가운데 LED(Light Emitting Diode)는 제어방식이 정 전류구동과 SMPS(Switching Mode Power Supply)방식으로 구동하므로 소형화 및 경량화를 이룰 수 있고 전력 소모가 적으며 효율이 높아 광원 및 조명장치에 활용하는데 유용하다. LED 생산업체는 고출력 LED 모듈의 칩 설계 원천기술의 확보가 필요하고, LED 를 조명으로 적용시키기 위해 전력손실을 줄일 수 있는 고출력 LED 모듈 개발을 위한 구동회로 설계와 역률 개선의 방안 연구가 필요하다. 산업현장에서 교류(AC) 직결 LED 구동소자인 HV9910를 일반적으로 사용하고 있다. 본 논문에서 HV9910에 PFC와 Noise Filter를 추가한 구동회로의 역률 및 효율에 대한 개선방법을 시뮬레이션을 통해 검증하는데 있다.

• Journal of Power Electronics
• /
• 제16권3호
• /
• pp.1200-1208
• /
• 2016

Planar electromagnetic interference (EMI) filter has significant engineering significance to power electronic system integration and miniaturization. However, the value of differential mode capacitance cannot meet the demand of noise suppression because of the size limit of ceramics. In this case, the EMI filter of novel multilayers is recommended to address this issue. A novel integrated structure of EMI filter based on multilayer ceramic is proposed in this study. The inductance and capacitance of the new structure can be designed separately, which is an advantage in manufacturing. Insertion loss is measured more closely to the actual situation in this study, which is different from the condition where source and load impedances are both 50 Ω. In the process of designing a novel EMI filter, noise impedance is considered. Moreover, the prototype is created and applied to a small switching power supply, which verifies the effectiveness of the developed EMI filter.

• 한국생산제조학회지
• /
• 제21권1호
• /
• pp.161-166
• /
• 2012

Intravenous (IV) injection is widely used to supply Ringer solution directly into a vein in hospital. Generally, a passive injection method has been used, which causes the inconsistent flow rate of fluid and inappropriate control of injection time by a patient. It leads to an unnecessary nurse's overwork and decrement of IV injection's effect. To solve these problems, flow control infusion pumps have been developed. But because of relatively heavy weight and high price, its usage has been limited. In the present study, a new automatic IV injection system is developed. It is installed with a small pressing mechanism driven by a small electric motor to regulate the flow rate by pressing tube. Proportional integral derivative (PID) feedback control algorithm is applied to control the electric motor. The system is smaller in size and uses lower power than the existing commercial product. The newly developed system is also installed with networking capability, which enables monitoring the status of several automatic IV injection system at the same time.

• 한국분무공학회지
• /
• 제7권2호
• /
• pp.31-36
• /
• 2002

According to the improvement of PC performance, it is expected that calorific value, which causes PC to malfunction, is increased. Therefore, the development of new cooling system is recently required. As the method to solve this problem, we applied loop heat pipe to PC cooling system. The advantage of the loop heat pipe is that it has a small size, light weight, simple shape, long life and it has a good performance on heat transfer, no-noise, wide range of applicable temperature and no supply of power from the outside. It is confirmed that loop heat pipe reduces thermal resistance and has a good performance on PC cooling.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제50권5호
• /
• pp.238-245
• /
• 2001

During an AC motor's start-up accelerating period, a large amount of current is required to reach to the rating speed. This is called in-rush current. This peak in-rush current can be more than about several times the operating or steady-state current in the full load rating of the motor. In-rush current is present in both and electronic ballasts. The main area of concern is the tripping of circuit breaker and fuses which can affect electrical system components From this, we can see that the electrical power controllers will be rather concerned, since they have to supply the actual current necessary to start the motor. This paper presents a new method to reducing in-rush current and energy saving of the single-phase induction motor used in air-conditioner. It can be obtained that proposed system is low cost and small size as compared with other controller. Experiments are focused on a capacitor starting single-phase induction motor. The optimal power saving and in-rush current limiting by phase angle control are verified by experimental results. Also, auxiliary winding was controlled by electronic starting switch.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 춘계학술대회 논문집
• /
• pp.247-251
• /
• 2008

This paper presents a micro air pump actuated by PZT actuator (synthetic jet actuator) for air supply for micro fuel cells. The synthetic jet actuators are usually created by a traditional PZT-driven actuator, which consists of a small cylindrical cavity, in/outlet channel and PZT diaphragms. To design the micro air pump, a numerical analysis has been conducted for flow characteristics with respect to various geometries. A prototype of the micro air pump, with a size of $mm{\times}mm{\times}mm$, was fabricated by PDMS replication process and was conducted performance test. To control the PZT actuator, we used the SP4423 micro chips that can be amplified input voltage to reduce the controller size and the power consumption. With a voltage of 3V at 100Hz, the air pump's pumping pressure is 600pa and its power consumption is only 0.1mW.

• 한국수소및신에너지학회논문집
• /
• 제31권6호
• /
• pp.596-604
• /
• 2020

Solid oxide electrolysis cell (SOEC) attracts much attention because of its high energy efficiency among many water-electrolysis technologies. SOEC operates at temperatures above 700℃, so that the water required for water-electrolysis must be supplied in the form of steam. When the steam to be supplied to the SOEC is generated by the SOEC system itself, an enormous amount of latent heat is required to vaporize the water, so additional energy must be supplied to the SOEC system. On the other hand, if the steam can be supplied from the outside, a small amount of energy is required to raise the temperature of the low temperature steam, so that the SOEC system can be operated without additional energy supply from outside, which enables efficient water-electrolysis. In this study, we figure out the size of heat exchanger for various steam temperature and effectiveness of heat exchanger, and propose the energy efficiency of the system.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제3C권4호
• /
• pp.123-129
• /
• 2003

We propose a high voltage dc-dc converter for a CW (continuous wave) $CO_2$ laser system using a current resonant half-bridge inverter and a Cockcroft-Walton circuit. This high voltage power supply includes a 2-stage voltage multiplier driven by a regulated half-bridge series resonant inverter. The inverter drives a step-up transformer and the secondary transformer is applied to the voltage multiplier. It is highly efficient because of the reduced amount of switching losses by virtue of the current resonant half-bridge inverter, and also due to the small size, low parasitic capacitance in the transformer stage owing to the low number of winding turns of the step up secondary transformer combined with the Cockroft-Walton circuit. We obtained a maximum laser output power of 44 W and a maximum system efficiency of over 16%.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 C
• /
• pp.1821-1823
• /
• 2003

We propose a high voltage dc-dc converter for CW(continuous wave) $CO_2$ laser system using a current resonant half-bridge inverter and a Cockcroft-Walton circuit. This high voltage power supply includes a 2-stage voltage multiplier driven by a regulated half-bridge series resonant inverter. The inverter drives a step-up transformer and the transformer secondary is applied to the voltage multiplier. Thus, it has high efficiency because of the less switching losses by virtue of the current resonant half-bridge inverter, and also compact size, small parasitic capacitance in the transformer stage owing to the low number of a winding turn of the step up transformer secondary by combining with Cockroft-Walton circuit. We could be obtained the maximum laser output power of 44 W and the maximum system efficiency of over 16 %.

• 한국인터넷방송통신학회논문지
• /
• 제22권6호
• /
• pp.31-36
• /
• 2022

본 논문에서는 (초)소형 위성에 탑재할 수 있는 영상레이다용 Backend 유닛의 제작 및 시험 결과를 제시한다. 영상레이다용 Backend 유닛은 (초)소형 위성 탑재를 목적으로 제어/저장보드, 송수신보드 및 전원보드를 하나의 박스 유닛으로 설계하였다. 제어/저장보드는 RFSoC를 이용하여 광대역 신호의 생성, 운용 타이밍 생성 및 영상레이다 운용을 위한 제어 및 연산을 수행하고, 자체적으로 저장기를 보유할 수 있도록 설계하였다. 송수신보드는 제어보드에서 생성되는 광대역 신호를 주파수 상향변환을 통해서 X-대역 운용주파수로 변환할 수 있도록 설계하였다. (초)소형 위성은 소형/경량/저비용이 중요한 고려요소 이므로 MIL, Industrial 등급의 부품을 적절히 적용하고 동시에 방사선 시험, 해석 및 우주환경 시험을 통해서 임무 수명을 보장할 수 있도록 설계 하였다.