• Food Science and Preservation
• /
• v.18 no.5
• /
• pp.786-794
• /
• 2011

To investigate the sanitary-quality level of commercial kimchi in South Korea, the pH, acidity, and microbial-flora changes in the kimchi were determined. Samples of kimchi produced by three different manufacturers (a small grocery store, a small/medium-sized enterprise, and a large food company) were collected. Freshly made kimchi was purchased and fermented at $10^{\circ}C$ for 10 days. The pH of the commercial kimchi on the purchased day was approximately pH 5.8, and that on the $10^{th}$ day of fermentation was ${\simeq}pH$ 4.1. The kimchi purchased from a large company showed a more rapid decline in pH level during fermentation. The saltiness of the kimchi purchased from a medium-sized company was slightly higher than those of the other commercial kimchi samples. The saccharinity index of the kimchi produced by a small grocery store was higher than those of the other samples, and its value deviation was also higher than those of the other commercial kimchi samples. A higher total viable-cell count and a higher lactic-acid bacteria (LAB) count were detected in the kimchi from the large food company at the beginning of fermentation compared to the samples of the two other kimchi manufacturers. The highest cell numbers of gram-positive bacteria (except LAB) and coliform bacteria were detected from the small-grocery-store kimchi, but the coliform bacteria count gradually decreased during fermentation although such bacteria were still detected until the $10^{th}$ day of fermentation. In contrast, coliform bacteria were not detected in the samples from the medium-sized and large food companies. Yeast, which is detected in over-ripened kimchi, was detected in the unfermented kimchi from the small grocery store, which had a below-0.36% acidity level. The gram-positive bacteria (except LAB) that were detected in all the tested commercial kimchi samples were determined to be Bacillus spp., and the gram-negative bacteria were determined to be Escherichia coli, Enterobacter spp., Sphingomonase spp., and Strenophomonas spp. The proportions of all the aforementioned bacteria in the kimchi samples, however, were different depending on the samples that were taken. These results indicate that a more sanitary kimchi production process and a more systematic kimchi production manual should be developed to industrialize and globalize kimchi.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• v.25 no.1
• /
• pp.13-20
• /
• 2022

Purpose: Hydrogen-methane breath tests are used to diagnose carbohydrate malabsorption and small intestinal bacterial overgrowth. The COVID-19 pandemic has driven the modification of procedures as breath tests are potentially aerosol-generating procedures. We assessed the effect of delayed analysis of breath samples, facilitating the at-home performance of breath testing. Methods: Children provided two breath samples at every step of the lactose breath test. The samples were brought back to the clinic, and one set of samples was analyzed immediately. The second set was stored at room temperature and analyzed 1-4 days later. Results: Out of the 73 "double" lactose breath tests performed at home, 33 (45.8%) were positive. The second samples were analyzed 20 to 117 hours after the first samples (41.7±24.3 hours). There was no significant difference in the hydrogen concentration between the first and second sets (Z=0.49, p=0.62). This was not the case for methane, which had a significantly higher concentration in the second breath samples (Z=7.6). Conclusion: Expired hydrogen levels remain stable in plastic syringes if preserved at room temperature for several days. On the other hand, the delayed analysis of methane appeared to be less reliable. Further research is needed to examine the impact of delayed analysis on methane and hydrogen concentrations.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.9
• /
• pp.5281-5286
• /
• 2013

Purpose: Prostate cancer caused by the abnormal disorderly growth of prostatic acinar cells is the most prevalent cancer of men in western countries. We aimed to screen out differentially expressed genes (DEGs) and explore small molecule drugs for prostate cancer. Materials and Methods: The GSE3824 gene expression profile of prostate cancer was downloaded from Gene Expression Omnibus database which including 21 normal samples and 18 prostate cancer cells. The DEGs were identified by Limma package in R language and gene ontology and pathway enrichment analyses were performed. In addition, potential regulatory microRNAs and the target sites of the transcription factors were screened out based on the molecular signature database. In addition, the DEGs were mapped to the connectivity map database to identify potential small molecule drugs. Results: A total of 6,588 genes were filtered as DEGs between normal and prostate cancer samples. Examples such as ITGB6, ITGB3, ITGAV and ITGA2 may induce prostate cancer through actions on the focal adhesion pathway. Furthermore, the transcription factor, SP1, and its target genes ARHGAP26 and USF1 were identified. The most significant microRNA, MIR-506, was screened and found to regulate genes including ITGB1 and ITGB3. Additionally, small molecules MS-275, 8-azaguanine and pyrvinium were discovered to have the potential to repair the disordered metabolic pathways, abd furthermore to remedy prostate cancer. Conclusions: The results of our analysis bear on the mechanism of prostate cancer and allow screening for small molecular drugs for this cancer. The findings have the potential for future use in the clinic for treatment of prostate cancer.

• Parasites, Hosts and Diseases
• /
• v.57 no.2
• /
• pp.197-200
• /
• 2019

Cryptosporidium is a common intestinal protozoan that can lead to diarrhea in humans and dogs. The predominant species of infection are C. hominis and C. parvum in humans, and C. canis in dogs. However, C. canis can infect immunocompromised humans. Considering the close contact with humans, dogs have the potential to be reservoirs for human cryptosporidiosis. Breeding kennels are the major supply source of puppies for pet shops. The present study is to determine the molecular prevalence and characteristics of Cryptosporidium spp. found in breeding kennel dogs. A total of 314 fecal samples were collected from young and adult dogs kept in 5 breeding kennels. A polymerase chain reaction targeting the small subunit rRNA gene was employed for the detection of Cryptosporidium spp. To determine the species, the DNA sequences were compared to GenBank data. Overall, 21.0% of the fecal samples were positive for Cryptosporidium spp. infection. Cryptosporidium spp. was detected in all 5 facilities. A sequencing analysis demonstrated that all isolates shared 99-100% similarity with C. canis. The results suggest that Cryptosporidium spp. infection is present at a high-level in breeding kennel dogs. However, because dominant species in this survey was C. canis, the importance of breeding kennel dogs as reservoirs for Cryptosporidium spp. transmission to humans is likely to be low in Japan.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2005.04a
• /
• pp.344-347
• /
• 2005

The purpose of the study for the development of the technologies of water quality monitoring and contamination protection at water resource aquifer is to secure the groundwater as potable water resources. The results of water analysis as a basis of potable water criteria showed that 30 groundwater samples among 138 samples of small water supply system (21.7%) were exceeded the water criteria. The concentrations of Cl, $NO_3$ and Na for granite area are higher than those of gneiss and metasedimentary rocks of Ogcheon belt area and they are caused by the high vulnerability of groundwater at granite region where the residential area and cultivated land are concentrated. The spatial distribution of components indicated the close relationships between water quality and geology, land use, and topography. The multivariate statistical results showed that the water samples are divided into three groups by geology.

• Food Science and Biotechnology
• /
• v.16 no.4
• /
• pp.610-614
• /
• 2007

Dynamic rheological properties of honeys with invert sugar at different mixing ratios of honey and invert sugar (10/0, 812, and 6/4 ratios) were evaluated at various low temperatures (-15, -10, -5, and $0^{\circ}C$) using a controlled stress rheometer for small-deformation oscillatory measurements. Honey-invert sugar mixtures displayed a liquid-like behavior, with loss modulus (G") predominating over storage modulus (G') (G">>G'), showing the high dependence on frequency (${\omega}$). The magnitudes of G' and G" increased with a decrease in temperature while their predominant increases were noticed at -10 and $-15^{\circ}C$. The greater tan ${\delta}$ values were found at higher temperature and ratio of honey to invert sugar, indicating that the honey samples at subzero temperatures become more viscous with increased ratio of honey to invert sugar and temperature. The time-temperature superposition (TTS) principle was used to bring G" values at various temperatures together into a single master curve. The TTS principle was suitable for the honey samples in the liquid-like state. The progress of viscous property (G") was also described well by the Arrhenius equation with high determination coefficients ($R^2=0.99$). Dynamic rheological properties of honey samples seem to be greatly influenced by the addition of invert sugar.

• The Research Journal of the Costume Culture
• /
• v.17 no.6
• /
• pp.1059-1067
• /
• 2009

The knitting method of the sleeves for improving movement adaptability were studied in this paper. The purpose of this study is proposing a knitting method that is suitable for the bodies of women in their 20's and can enhance wearing satisfaction. To see the effect of the bind-off length at the axilla, a movement adaptability test was undertaken for 4 samples that have bind-off at bodices. In addition to that, the analysis of their sliding distance with respect to the human motions were executed. The results of this study were listed below. Its result was that the samples with small bind-off lengths represent better wearing satisfaction than the samples which have large bind-off lengths. The comparison of the sliding distances at the hem, waist and sleeves with respect to the tester's motions also shows that the sample having small bind-off makes better result than the sample with large bind-off. It was observed that the optimal length of bind-off was 2cm for the improvement of the sleeve functionality.

• Journal of the Korean Society of Costume
• /
• v.60 no.10
• /
• pp.65-79
• /
• 2010

Each season, many clothing companies dump small pieces of fabrics left over from making samples. Since fabrics do not decompose easily, this results in environmental pollution. This research was done to discover effective ways to reuse these fabric remnants. As most of these remnants were not large enough for making clothes, fashion accessories was chosen as the design object. Four steps of design development process followed: information research & analysis, prototype design & sample making, market testing, final design decision. After market research and trend analysis, four neck decoration wear -- scarf & muffler(SM). collar & cape(CC), vest & top(VT), and necklace(NE) -- were selected as final product types. 45 designs arose, and 120 items with variations in fabric materials and colors were produced as samples. The three main themes (multiple. reversible, cross) were applied throughout all of the design items. Samples were evaluated from the reactions of the consumers through a 10-day sale at a retail store. Based on the sales record and customers' opinions, five designs from each of the product types SM, CC, and VT were picked out as final designs. In conclusion, fashion accessories turned out to be a more appropriate item to reuse fabric remnants from clothing companies than clothes were, because they necessitate small fabric size and the limitation in fabrics could be compensated with creative design ideas.

• The Korean Journal of Legal Medicine
• /
• v.41 no.2
• /
• pp.41-45
• /
• 2017

Fetal DNA (fDNA) detection in maternal serum is a challenge due to low copy number and the smaller size of fDNA fragments compared to DNA fragments derived from the mother. Massively parallel sequencing (MPS) is a useful technique for fetal genetic analysis that is able to detect and quantify small amounts of DNA. In this study, seven clinical samples of maternal serum potentially containing fDNA were analyzed with a commercial single nucleotide polymorphism (SNP) panel, the HID-Ion $AmpliSeq^{TM}$ Identity Panel, and the results were compared to those from previous studies. Reference profiles for mothers and fetuses were not available, but multiple Y chromosomal SNPs were detected in two samples, indicating that fDNA was present in the serum and thereby validating observations of autosomal SNPs. This suggests that SNP-based MPS can be valuable for fDNA detection, thereby offering an insight into fetal genetic status. This technology could also be used to detect small amounts of DNA in mixed DNA samples for forensic applications.

• Corrosion Science and Technology
• /
• v.23 no.2
• /
• pp.145-153
• /
• 2024

In the automotive industry, the hole expanding test is widely used to assess the formability of punched holes in sheets. This test provides a good representation of formability within the framework defined by the ISO 16630 standard. During hole expanding tests on galvanized high strength steels, a negative effect was observed when there was a delay between hole punching and expansion, as compared to performing both operations directly. This effect is believed to be caused by hydrogen aging, which occurs when hydrogen diffuses towards highly-work hardened edges. Therefore, the aim of this study is to demonstrate the migration of hydrogen towards work-hardened edges in high strength Zn-coated steel sheets using a novel Thermal Desorption Analyzer (TDA) designed for small samples. This newly-developed TDA setup allows for the quantification of local diffusible hydrogen near cut edges. With its induction heating and ability to analyze Zn-coated samples while reducing artifacts, this setup offers flexible heat cycles. Through this method, a hydrogen gradient is observed over short distances in shear-cut galvanized steel sheets after a certain period of time following punching.