• Journal of Korean Society for Quality Management
• /
• v.18 no.1
• /
• pp.96-115
• /
• 1990

This study suggest a plan for a small and medium auto parts enterprises in Ulsan Industrial Complex to do cooperation activity for management rationalization. To derive the plan, it is considered that characteristics of auto parts industry, existing status of cooperation activity, and faced problems of the small and medium enterprises in Ulsan area. Suggested plan may be well used for basic information of auto parts company's cooperation, and may contribute to expand cooperation activity.

• International Journal of Quality Innovation
• /
• v.4 no.1
• /
• pp.213-219
• /
• 2003

This paper proposes an efficient and effective BOM management scheme for small and medium manufacturing (SME) companies that produce automobile parts. Automobile part's manufacturers produce very various products due to various automobile characteristics such as types, colors, and options of cars. These products are classified into product groups with common parts and like this product groups with commonality are regarded as product family. This paper proposes a BOM data model for product family structures and implements the practical EXCEL-based BOM management system for real small and medium manufacturing (SU) companies that produces automobile parts.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.30 no.11 s.254
• /
• pp.1461-1471
• /
• 2006

This paper presents the mathematical model for rolling behaviors of a small regular polygonal part on an inclined plane. Throughout the numerical analysis performed with the simulation program which has been experimentally validated, it is shown that the number of edges of the rolling polygonal part can be a measure for the energy dissipation rather than the coefficient of friction. The appropriate slope angle has been found to be around 20 degree for roughness-separation as well as shape-separation of polygonal parts which have small number of edges. In additions, the vibratory motion applied to the inclined plane is able to cause mixed parts to be separated more effectively according to the shape or the roughness. Finally, a couple of parts separation methods based on the analysis results are presented, and are validated through the numerical simulation.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.31 no.7 s.262
• /
• pp.611-619
• /
• 2007

In this study, the droplet size distribution of a slit injector at different surrounding conditions, such as air flow and fuel temperature, were investigated. Phase Doppler anemometry (PDA) was utilized to investigate the initial droplet size distribution and the effect of fuel temperature and air flow on droplet size distribution. The entrained air motion was also evaluated by the temporal velocity profile of droplets. When the air flow velocity increased, the small droplets were more entrained to the upper and central parts of the spray and this tendency was confirmed by plotting the temporal velocity profile of droplets. This entrainment of small droplets at high airflow velocities caused relatively small mean droplet size at upper and central parts of the spray and the large mean droplet size at downstream and edge of the spray, compared to that of low airflow velocities. The total mean droplet size, obtained by averaging the size of all droplets measured at all test locations, decreased when the high airflow velocities were applied. The increased fuel temperature, with an airflow velocity of 10m/s, caused reduced droplet size at all test locations. However, the decreased value of mean droplet size at high fuel temperatures was relatively higher at upper parts of the spray, compared to downstream, as a result of enhanced entrainment of small droplets to upper parts of the spray.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.85-88
• /
• 1995

Recently, the micro mold maching techining technology is developed by means of the mechanical and high energy beam process. It is possible to make the micro structure mold with high aspect ratio by the LIGA technology. This mode is used for mass production of plastic parts by the micro injection molding method. In this study, we intend to research on the basic technology of micro injection molding. As the result, we developed the injection molding technology for small column plastic parts which diameter is 500 .mu. m and 200 .mu. m respectively with wbout aspect ratio 20.

• The KIPS Transactions:PartD
• /
• v.16D no.4
• /
• pp.613-620
• /
• 2009

It is necessary to develop a system of judging whether or not the parts are defective easily at low cost, especially in a small scale factory which manufactures a large variety of products in small amounts. To develop such system, we require to recognize objects using human's cognitive ability under various circumstances. Human's high intelligence originates mostly from neocortex of human brain. The HTM theory, which is proposed by Jeff Hopkins, is one of the recent researches to model the operation principle of neocortex. In this paper we developed PRESM (Parts image REcognition System for small scale Manufacturing industry) system based on the HTM theory to judge badness of manufactured products. As a result of application to the real field of workplace environments we identified the superiority of our recognition system.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.42 no.3
• /
• pp.80-88
• /
• 2019

Recently, automobile manufacturing companies, which are major customers of them, are requiring IATF 16949 (ISO/TS 16949) certification as a mandatory requirement to secure product quality. In particular, IATF 16949 : 2016, revised in October 2016, was reinforced product traceability requirements for production information management by lot in the production process. Therefore, small and medium-sized precision parts processing companies in the automobile industry are very difficult to survive due to quality and price competition for customers satisfaction. MES (Manufacturing Execution System) is required to solve this problem. However, small and medium sized precision parts processing enterprises are reluctant to introduce the MES which is not suitable for the manufacturing environment of them such as high cost and low utilization. Even if the system is introduced, it is difficult to operate and maintain the system because the lack of computer manpower. In this paper, we propose a method for building a lot tracking system for small and medium precision parts processing companies by reviewing relevant literature and analyzing cases. In addition, by managing the production history for each lot of the final product in the system, we will grasp the effect of reducing the quality failure cost obtained by minimizing the range of defect selection.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.7
• /
• pp.448-466
• /
• 2019

Today, companies are increasingly focused on SCM (Supply Chain Management) as a means for cost-cutting and efficient operation. The company's ultimate objective is to win and maintain a sustained dominant position in the uncertainties of the global environment and future competitiveness. In this respect, this study examined the effects of management strategy, collaboration process and SCM integration on corporate performance in small and midsize parts manufacturers. The results of empirical analysis are summarized as follows. Management strategy, collaboration process and SCM integration had positive effects on corporate performance in domestic small and midsize parts manufacturers, and all hypotheses were supported. Consequently, it can be confirmed that quality, cost and flexibility for management strategy, and strategic objective perception, support policy, problem solution and knowledge information sharing for delivery and collaboration as small and midsize parts manufacturers are mechanisms for improving quality reliability, decreasing cost, delivery obedience and information system operation of SCM integration, and boosting corporate quantitative and qualitative performance.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.38 no.6
• /
• pp.1001-1012
• /
• 2018

Regarding the small- and medium-sized enterprises in Korea that manufacture the railway vehicle parts, there are over 250 related companies. And they have been surviving in the form of producing and delivering the parts of the railway vehicles by importing the technologies and the products of the foreign countries rather than possessing their own technological abilities. Due to this, regarding the industry of the core components of the railroads, the dependence on the overseas has been high. As such, although, for supporting the small- and medium-sized enterprises that manufacture the railway vehicle parts, the government has been strengthening the diverse policy supports, it is a fact that the effectiveness of the support is not high. And, in order to effectively support these, there is a need to understand clearly and definitely what the important promotion factors are in the process of the technology commercialization. Accordingly, through the precedent researches regarding the factors that promote the technology commercializations of the small- and medium-sized enterprises that manufacture the railway vehicle parts, this research had extracted 10 main items. And the level of the importance of these indices was analyzed by using the AHP (Analytic Hierarchy Process). As a result of the AHP analysis, the factors within a corporation appeared to be the most important factor. And, as for the lower-ranking item, the commercialization capability was analyzed to be the most important item. It is highly expected that the contents and the results of this research will be usefully used when formulating the planning of the support program and the support policy for the technology commercializations by the public research organizations and the railroad management organization, which is an organization that supports the small- and medium-sized enterprises that manufacture the railway vehicle parts.

• Journal of the Korean Society of Industry Convergence
• /
• v.23 no.4_2
• /
• pp.661-667
• /
• 2020

The optimal shape modeling of core parts through 3D modeling and structural analysis for the development of small and medium-sized ships. The goal is to improve the efficient structure of the hydraulic system for controlling the rudder among the core steering parts in small and medium-sized ships. Through 3D modeling and structural analysis, a new concept of tiller parts and a double-acting hydraulic cylinder control system were proposed and operational structural stability was evaluated. Structural analysis of the three different tiller designs that can be replaceable onto existing fishing vessels was conducted to derive the final shapes. The emphasis was placed on evaluating the structural stability of the key drive components, the tiller, pin, and cylinder rodin the maximum torque condition of the hydraulic cylinder.