대한기계학회논문집B (Transactions of the Korean Society of Mechanical Engineers B)

  • 제31권7호
  • /
  • Pages.611-619
  • /
  • 2007
  • /
  • 1226-4881(pISSN)
  • /
  • 2288-5324(eISSN)
대한기계학회 (The Korean Society of Mechanical Engineers)
권호 표지
DOI QR코드

DOI QR Code

팬형분무의 주변조건에 따른 입자분포 변화

The Droplet Size Distribution of Fan Spray at Different Surrounding Conditions

  • 발행 : 2007.07.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

In this study, the droplet size distribution of a slit injector at different surrounding conditions, such as air flow and fuel temperature, were investigated. Phase Doppler anemometry (PDA) was utilized to investigate the initial droplet size distribution and the effect of fuel temperature and air flow on droplet size distribution. The entrained air motion was also evaluated by the temporal velocity profile of droplets. When the air flow velocity increased, the small droplets were more entrained to the upper and central parts of the spray and this tendency was confirmed by plotting the temporal velocity profile of droplets. This entrainment of small droplets at high airflow velocities caused relatively small mean droplet size at upper and central parts of the spray and the large mean droplet size at downstream and edge of the spray, compared to that of low airflow velocities. The total mean droplet size, obtained by averaging the size of all droplets measured at all test locations, decreased when the high airflow velocities were applied. The increased fuel temperature, with an airflow velocity of 10m/s, caused reduced droplet size at all test locations. However, the decreased value of mean droplet size at high fuel temperatures was relatively higher at upper parts of the spray, compared to downstream, as a result of enhanced entrainment of small droplets to upper parts of the spray.

키워드

참고문헌

  1. Zhao, F., Lai, M. C. and Harrington, D. L., 1999, 'Automotive Spark-ignited Direct-Injection Gasoline Engines,' Prog. Energy Combustion Sci., Vol.25, pp. 4-8 https://doi.org/10.1016/S0360-1285(99)00004-0
  2. Moon, S., Choi, J., Abo-Serie, E. and Bae, C. 2005, 'The Effect of Temperature on Spray and Combustion Characteristics in a Single Cylinder DISI Engine,' SAE Paper 2005-01-0101
  3. Choi, Y., Sohn, J., Cha, G. and Kim, D. 2001, 'Effects of Different Fluid Properties on Velocity and Size of Droplets from Pressure-Swirl Nozzles,' 2001 KSME Annual Spring and Fall conferences, Vol. 1, No. 4, pp. 909-914
  4. Honda, T., Kawamoto, M., Katashiba, H., Sumida, M., Fukutomi, N. and Kawajiri, K., 2004, 'A Study of Mixture Foramtion and Combustion for Spray Guided DISI,' SAE paper 2004-01-0046
  5. Park, Y. and Lee, C., 2001, 'Development of Gasoline Direct Swirl Injector,' Transactions of KSME B, Vol. 25, No. 1, pp. 78-86
  6. Abe, S., Sonoda, Y., Suzuki, H., Suzuki, Y. and Basaki, M., 2006, 'Development of V-6 3.5-liter Engine Adopting New Direct Injection System' SAE Paper 2006-01-1259
  7. Dombrowski, N. and Johns., W. R. 1963, 'The Aerodynamic Instability and Disintegration of Viscous Liquid Sheets,' Chemical Engineering Science 1963 Vol. 18, pp. 203-214 https://doi.org/10.1016/0009-2509(63)85005-8
  8. Okamoto, A., Sato, T., Shirabe, N. and Anezaki Y., 2001, 'Development of Fan Spray Simulation for Gasoline Direct Injection Engines,' SAE Paper 2001-01-0962
  9. Hayagawa, M., Takada, S., Yonesiga, K., Nagaoka, M. and Takeda, K., 2002, 'Fuel Spray Simulation of Slit Nozzle Injector for Direct-Injection Gasoline Engine,' SAE Paper 2002-01-1135
  10. Choi, J., Moon, S. and Bae, C., 2005, 'Spray Characteristics of High Pressure Fan Spray Injector with Various Crossflow Speed,' Journal of ILASS-Korea, Vol. 10, No. 3, pp. 38-44
  11. VanDerWege, B. A. and Hochgreb, S., 2000, 'Effects of Fuel Volatility and Operating on Fuel Sprays in DISI Engine : (1) Imaging Investigation,' SAE Paper 2000-01-0535
  12. Bayvel, L. and Orzechowski, Z., 1993, 'Liquid Atomization,' Taylor & Francis Press