• 자동차안전학회지
• /
• 제9권1호
• /
• pp.25-31
• /
• 2017

Small Overlap test decided on IIHS (Insurance Institute for Highway Safety) evaluates a robustness of the car body and a passenger injury protection. A current vehicle is satisfied with a robustness of the car body for Small Overlap test but not meet the requirements of passenger injuries because it is difficult to inquire into the actual state of injury mechanism for Small Overlap test. The study shows the new injury mechanism which represents the relation between a structure of the vehicle placed with the lift foot and the low extremity injury.

• 한국생산제조학회지
• /
• 제26권2호
• /
• pp.205-213
• /
• 2017

In order to improve occupant protection in frontal crash, the IIHS introduced a small overlap frontal crash test in 2012. When the front corner of a car collides with another car or object, such as utility pole the test replicated the sequence of events. Because occupants move simultaneously forward and toward the side of the vehicle this test is challenging for some airbag and safety belt designs. In the small overlap frontal test, a car travels at 64 km/h toward a rigid barrier. A hybrid III dummy is positioned in the driver seat. 25% of the total width of the car strikes the barrier on the driver side. After review of small overlap frontal test protocol and overall rating, six run-throughs were performed according to the original test method.

• 자동차안전학회지
• /
• 제5권1호
• /
• pp.11-15
• /
• 2013

Small overlap crash caused fatal injury in real-world crash. IIHS(Insurance Institute for Highway Safety) proposed the small overlap test. The objective of this study is to analyze dummy injury criteria and dummy excursion on the sled reinforced body angle. Result of the comparisons of dummy injury criteria of a head, neck, and chest was best correlation between sled and vehicle test on base $angle+3^{\circ}$. However, lower extremity was not correlation because sled test could not copy of intrusion. There were a correlation between dummy movement and sled reinforced body angle. Sled reinforced body angle affects the lateral direction of excursion more than longitudinal excursion.

• 한국정밀공학회지
• /
• 제16권3호통권96호
• /
• pp.208-214
• /
• 1999

The purpose of this paper is to develop a profile modification technique of spur gears and its computer program for the prevention of gear tooth overlap. In the gear system, tooth overlap produces an impact at the initial contact of some tooth pairs. In this analysis, contact surface was assumed to be unbonded and frictionless under small deformation and stain. The problem is formulated by a variational statement with inequality constraint. Tooth load sharing is obtained by the application of contact theory, and overlap is known by the analysis of deformation. After carrying out the profile modification of gear tooth, we verified the reasonable results.

• 한국의류학회지
• /
• 제20권4호
• /
• pp.620-630
• /
• 1996

This study identified overlap of male innovativeness and of opinion leadership across product class. Product class include clothing, hairstyle and cosmetics, small electronic appliances, large electronic appliances, interior supplies, sports and leisure supplies, and cars. 423 male adults working in Seoul area was surveyed using questionnaire. Results of statistical analysis supported that innovativeness and opinion leadership are not monomorphic but polymorphic across product class. Higher degree of overlap and higher degree of correlationship of innovativness and of opinion leadership exist across product class which share similar characteristics such as clothing-cosmetics, small electronic appliances-large electronic appliances. Innovative communicator ranged from 5.0% to 11.4% in which percentage of innovative communicator was highest in the case of clothing purchase.

• 한국생산제조학회지
• /
• 제25권2호
• /
• pp.118-123
• /
• 2016

Overlap cutting is a fundamental method of applying abrasive water jet (AWJ) machining to milling to produce a wider surface because the nozzle outlet is approximately 1.0 mm wide. In this study, the effects of overlap cutting on the depth profile and surface roughness are investigated. The overlapping area depends on the amount of step over, which is controlled in the pick-feed direction. If the step over is equal to or larger than the diameter of the nozzle, no overlap cut occurs but large cusps remain between the cut paths. A step over as small as one-thirds of the nozzle diameter may lead to triple-overlap cutting resulting in an extraordinary depth. By using pocket milling experiments with a step over of 0.46 (or 0.47), it is verified that AWJ can produce a milled surface of titanium, one of the hard-to-cut materials, with $76{\mu}m$ Ra.

• The Korean journal of internal medicine
• /
• 제39권3호
• /
• pp.524-536
• /
• 2024

Background/Aims: This study applied the 2022 American College of Rheumatology (ACR)/European Alliance of Associations for Rheumatology (EULAR) criteria for antineutrophil cytoplasmic antibody (ANCA)-associated vasculitis (AAV) to patients with systemic sclerosis (SSc) and investigated the frequency of overlap syndrome of SSc and AAV (SSc-AAV-OS). Methods: Among the 232 patients diagnosed with SSc, 105 with signs suggestive of small- or medium-vessel vasculitis, which were defined as the present of interstitial lung disease (ILD), peripheral neuropathy, or suspected renal vasculitis, were included in this study and analyzed. Results: Among the 105 SSc patients, the detection rate of ANCA was 19.0%. When the 2022 ACR/EULAR criteria were applied, the frequency of SSc-AAV-OS was 20.0%, which was much higher than 1.7% reported with previous criteria for AAV. ANCA positivity contributed to the reclassification of SSc-AAV-OS more than ANCA negativity in SSc patients with signs suggestive of small- or medium-vessel vasculitis. Conclusions: The frequency of SSc-AAV-OS in SSc patients with signs suggestive of small- or medium-vessel vasculitis at diagnosis was 20.0%. Therefore, we suggest that physicians should perform ANCA tests in SSc patients exhibiting signs suggestive of small- or medium-vessel vasculitis and apply the new criteria for AAV.

• 한국자동차공학회논문집
• /
• 제11권2호
• /
• pp.172-181
• /
• 2003

In this study, the stress intensity factor of center crack tip is calculated by the superposition method when it is surrounded by symmetrically distributed small cracks. The values of stress intensity factors of center crack tips are compared with those of the center crack tips calculated by the superposition method. These compared errors are influenced by the locations of distributed small cracks. These errors are inspected. When small cracks overlap and approach near the center crack tip, the effect of interaction caused by these cracks becomes noticeable and these errors become larger. In case of multiple distributed small cracks except this case, the stress intensity factor of the center crack tip is easily calculated by the superposition method.

• 한국정밀공학회지
• /
• 제15권11호
• /
• pp.244-250
• /
• 1998

In this study, the stress intensity factors of center crack are analyzed when it is surrounded by symmetrically distributed small cracks. The values of stress intensity factors of the center crack are greatly influenced by the locations of distributed small cracks. When small cracks overlap or approach near the tip of a center crack, the effect of interaction arisen by these cracks becomes noticeable. In case of multiple distributed small cracks, the stress intensity factor of a center crack is found to be efficiently determined by the superposition method.

• Journal of Welding and Joining
• /
• 제19권3호
• /
• pp.317-324
• /
• 2001

This study deals with high power Nd:YAG laser welding of thin steels for small pressure vessels. Full penetration welding at the overlap joint was performed so as to assure sufficient weld strength. Results showed that mid-depth weld size reduced drastically with increasing the travel speed. Position of focus had little effect on the bead formation even though short focal system was used. However, the shape factor and the bead width had closely related with the position of focus. Based on the microstructural inspection, acceptable weld was obtained when the overlap clearance was controlled up to 20% of the base metal thickness. In the case that the joint contained more clearance than the critical value, both the tensile shear strength and the tear strength were reduced. Results also demonstrated that shielding gases were proved to play a key role as far as the bead formation characteristics was taken into consideration. Blowing dry air through 5mm in diameter nozzle produced narrower bead cross-section than that of argon or nitrogen shielding.