• 제목/요약/키워드: Small MU

검색결과 2,251건 처리시간 0.025초

The Characterizing Analysis of a Buried-Channel MOSFET based on the 3-D Numerical Simulation

  • Kim, Man-Ho;Kim, Jong-Soo
    • Journal of Electrical Engineering and Technology
    • /
    • 제2권2호
    • /
    • pp.267-273
    • /
    • 2007
  • A depletion-mode MOSFET has been analyzed to evaluate its electrical behavior using a novel 3-D numerical simulation package. The characterizing analysis of the BC MOSFET was performed through short-channel narrow-channel and small-geometry effects that are investigated, in detail, in terms of the threshold voltage. The DIBL effect becomes significant for a short-channel device with a channel length of $<\;3({\mu}m)$. For narrow-channel devices the variation of the threshold voltage was sharp for $<4({\mu}m)$ due to the strong narrow-channel effect. In the case of small-geometry devices, the shift of the threshold voltage was less sensitive due to the combination of the DIBL and substrate bias effects, as compared with that observed from the short-channel and narrow-channel devices. The characterizing analysis of the narrow-channel and small-geometry devices, especially with channel width of $<\;4({\mu}m)$ and channel area of $<\;4{\times}4({\mu}m^2)$ respectively, can be accurately performed only from a 3-D numerical simulation due to their sharp variations in threshold voltages.

IRAS OBSERVATIONS OF DARK GLOBULES

  • Lee, H.M.;Hong, S.S.;Kwon, S.M.
    • 천문학회지
    • /
    • 제24권1호
    • /
    • pp.55-70
    • /
    • 1991
  • Infrared emission maps are constructed at 12.5, 25, 60, and $100{\mu}m$ for dark globules B5, B34, B133, B134, B361, L134 and L1523 by using Infrared Astronomical Satellite data base. These clouds are selected on the basis of their appearance in Palomar print as dark obscuring objects with angular sizes in the range of 3 to 30 arcminutes. The short wavelength(12.5 and $25{\mu}m$) maps show the embedded infrared sources. We found many such sources only in B5, B361 and B34 regions, Diffuse component at 12.5 and $25{\mu}m$, possibly arising from the stochastically heated very small dust grains(a < $0.01{\mu}m$) by interstellar radiation field, is found in B361 and L1523 regions. Such emission is characterized by the limb brightening, and it is confirmed in L1523 and in B361. Infrared emissions at the long wavelengths(60 and $100{\mu}m$) are due to colder dusts with temperature less than 20 K. The distribution of color index determined by the ratio 60 to $100{\mu}m$ intensities shows monotonic decrease of dust temperature toward the center. The black body temperature determined from these ratios is found to lie between 16 and 23 K. Such temperature is possible for small(i.e., $a\;{\lesssim}\;0.01{\mu}m$) graphite grains if the grains are mainly heated by interstellar radiation field. Thus IRAS 100 and $60{\mu}m$ emissions are arising mainly from small grains in the colud. The distribution of such dust grains implied from the emissivity distributions at 100 and $60{\mu}m$ resembles that of isothermal sphere. This contrasts to earlier findings of much steeper distribution of dusts contributing visible extinction. These dust grains are mainly larger ones(i.e., $a{\simeq}0.1{\mu}m$). Therefore we conclude that the average grain size increase, toward the cloud center.

  • PDF

미소 원주의 사출 성형 실험 (Injection Molding Experiments for Small Diameter Column)

  • 제태진;이응숙;김재구
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 1995년도 추계학술대회 논문집
    • /
    • pp.85-88
    • /
    • 1995
  • Recently, the micro mold maching techining technology is developed by means of the mechanical and high energy beam process. It is possible to make the micro structure mold with high aspect ratio by the LIGA technology. This mode is used for mass production of plastic parts by the micro injection molding method. In this study, we intend to research on the basic technology of micro injection molding. As the result, we developed the injection molding technology for small column plastic parts which diameter is 500 .mu. m and 200 .mu. m respectively with wbout aspect ratio 20.

  • PDF

중.소형 폐기물 소각시설에서 배출되는 수은, 납, 비소, 셀렌 배출특성 (A Characteristics of Hg, Pb, As and Se Emitted from Small and Medium Size Waste Incinerator Stacks)

  • 이한국;문부식;이동훈
    • 대한환경공학회지
    • /
    • 제27권11호
    • /
    • pp.1205-1214
    • /
    • 2005
  • 본 논문은 중소형 규모의 도시고형 폐기물소각시설 배가스의 수은, 납, 비소, 셀렌과 같은 휘발성중금속의 방출특성을 조사하는데 있다. 대체로, 소형 도시고형 폐기물소각시설에서 배출되는 수은, 납, 비소, 셀렌이 중형 소각시설에서 배출되는 것 보다 높게 나타났다. 이는 중형소각시설에 비하여 소형소각시설의 빈약한 대기오염제어장치의 가동과 높은 배가스 온도에 기인하는 것으로 판단된다. 중소형 소각시설의 배가스 온도는 2개의 온도그룹으로 나누어지는 것을 확인할 수 있다. 첫 번째 온도그룹은 대략 $100^{\circ}C$이고, 두 번째 온도그룹은 $400{\sim}700^{\circ}C$ 정도였다. 2번째 그룹에서의 배가스 중 수은, 납, 비소, 셀렌은 각각 $70.43\;{\mu}g/Sm^3$, $0.94\;{\mu}g/Sm^3$, $9.83\;{\mu}g/Sm^3$, $5.05\;{\mu}g/Sm^3$였다. 첫 번째 온도그룹에서 배가스의 수은, 납, 비소 셀렌은 두 번째 온도그룹의 것보다 낮은 특징을 가지고 있다. 한편, 중형소각시설에서의 수은제거효율은 $55.16{\sim}95.89%$로 나타났다. 이러한 수은의 감소는 폐열보일러의 온도저감이 기여를 하고 있었다. 상기 결과로, 중소형 소각시설에서 휘발성 중금속 제어에 중요한 역할을 하는 것은 배가스의 온도가 큰 역할을 한다. 따라서, 휘발성 중금속의 제거효율을 개선하기 위해서는, 냉각시스템의 온도가 제어되고 대기오염제어장치가 잘 운영되어야 한다.

응집 공정상에서 플럭의 성장 특성 고찰 (The Characteristic Floc Growth in Coagulation and Flocculation Processes)

  • 허재용;강익중;이상화
    • Korean Chemical Engineering Research
    • /
    • 제44권2호
    • /
    • pp.207-215
    • /
    • 2006
  • 본 연구의 목적은 응집공정에서 생성되는 플럭의 성상을 가시화하여 PACC의 응집 특성을 고찰하였다. 인공 원수내탁질 입자의 제타전위는 pH 8~9에서 영으로 수렴하였고 이 영역에서 TDS와 전기전도도가 최소값을 나타내 주었다. 급속 및 완속 교반의 최적 혼화강도가 관측되었으며, 특히 탁도의 제거에 있어서는 급속교반의 속도경사가 가장 낮은 $95.1sec^{-1}$에서 최대의 제거율을 나타내었다. 급속교반 후에는 $3{\sim}5{\mu}m$의 작은 입자가 급격히 생성되었으며 교반강도가 클수록 더 많은 수의 입자가 생성되었다. 완속교반이 진행될수록 $3{\sim}5{\mu}m$의 작은 입자의 수는 급격히 감소하였고 $7{\sim}21{\mu}m$의 중간 크기의 입자는 증가하는 경향을 나타내주었다. $23{\mu}m$ 보다 큰 입자의 경우는 급속교반의 속도경사가 $95.1sec^{-1}$에서 가장 많은 수가 생성되었고, $3{\sim}5{\mu}m$의 작은 입자의 경우에는 급속교반의 속도경사가 $760.7sec^{-1}$에서 가장 많이 생성되었다.

UHF RFID Tag Chip용 저면적·고신뢰성 512bit EEPROM IP 설계 (Design of Small-Area and High-Reliability 512-Bit EEPROM IP for UHF RFID Tag Chips)

  • 이동훈;김려연;장지혜;하판봉;김영희
    • 한국정보통신학회논문지
    • /
    • 제16권2호
    • /
    • pp.302-312
    • /
    • 2012
  • 본 논문에서는 UHF RFID 태그 칩용 512bit EEPROM의 저면적 설계 기술과 고신뢰성 기술을 제안하였다. 저면적회로는 디코딩 로직(decoding logic)을 단순화한 WL 구동 회로, BGR 회로 대신 저항 분배기(resistor divider)를 이용한 VREF 발생회로이다. Magnachip $0.18{\mu}m$ EEPROM 공정을 이용하여 설계된 512bit EEPROM IP의 레이아웃 크기는 $59.465{\mu}m{\times}366.76{\mu}m$으로 기존 회로를 사용한 EEPROM 대비 16.7% 줄였다. 그리고 쓰기 모드(write mode)를 빠져나올 때 DC-DC 변환기(converter)에서 출력되는 부스팅된 출력전압을 VDDP(=3.15V)로 방전시키는 대신, 공통접지(common ground)인 VSS로 방전시키는 방식을 제안하여 VDDP 전압을 일정하게 유지함으로써 5V 소자가 파괴되는 문제를 해결하였다.

복수개의 부궤환 루프를 가진 초소형 크기의 위상고정루프 (An Extremely Small Size Multi-Loop Phase Locked Loop)

  • 최영식;한근형
    • 한국정보전자통신기술학회논문지
    • /
    • 제12권1호
    • /
    • pp.1-6
    • /
    • 2019
  • 본 논문에서는 복수개의 부궤환 루프를 도입하여 칩 크기를 획기적으로 줄이면서 잡음 특성을 유지할 수 있는 위상고정루프를 제안하였다. 칩 면적을 최소화하는 것이 주목표이므로 하나의 작은 크기의 커패시터로 구성된 1차 루프필터와 복수개의 FVC를 사용하여 위상고정루프를 설계하였다. 전압제어 발진기에 연결된 복수개의 주파수-전압 변환 회로(frequency voltage converter : FVC)는 위상고정루프 내부에 복수개의 부궤환 루프를 만든다. 제안된 위상고정루프에서는 복수개의 부궤환 루프가 크기가 아주 작은 하나의 커패시터로만 구성된 루프필터를 가진 위상고정루프를 안정하게 동작하도록 해준다. 제안된 위상고정루프는 1.8V $0.18{\mu}m$ CMOS 공정을 이용하여 설계되었다. 시뮬레이션 결과는 1.6ps 지터와 $10{\mu}s$ 위상고장시간을 보여주었다.

기생패치를 이용한 소형 뮤-제로 영차공진 안테나 (Small Mu-Zero Zeroth Order Resonance Antenna with Parasitic Patch)

  • 엄귀섭;이창현;이재곤;이정해
    • 한국전자파학회논문지
    • /
    • 제27권4호
    • /
    • pp.350-357
    • /
    • 2016
  • 본 논문에서는 5.8 GHz에서 동작하는 기생패치를 이용한 소형 메타구조 기반의 뮤-제로 영차공진 안테나를 제안한다. 제안된 안테나는 뮤-네거티브(MNG: Mu-negative) 전송선로의 직렬 인덕턴스와 커패시턴스를 사용하는 뮤-제로 영차공진 안테나이며, 간단한 구조의 기생패치를 추가함으로써 직렬 커패시턴스를 증가시켜 소형화 하였다. 추가된 기생패치는 기존의 직렬 커패시턴스에 추가적인 병렬로 커패시턴스를 만들어 공진 주파수를 결정하는 직렬 커패시턴스를 등가적으로 증가시킨다. 기생패치는 HFSS를 이용한 모의실험을 통하여 최적화되었다. 제안된 안테나는 0.59의 kr값을 가지며, 기존 뮤-제로 영차공진 안테나 크기 대비 24 % 소형화 되었으며, 92 %의 효율과 6.57 dBi의 이득을 보였다. 최종 설계된 안테나는 제작 및 측정되었으며, 측정 결과는 모의실험 결과와 잘 일치함을 확인하였다.

$\mu$ SMES 마그네트용 모델 코일의 ?치 특성 (Quench Characteristic of the Model Coil for a $\mu$ SMES Magnet)

  • 김해종;성기철;조전욱;김석환;이언용;권영길;류강식;류경우
    • 한국초전도ㆍ저온공학회논문지
    • /
    • 제3권2호
    • /
    • pp.5-9
    • /
    • 2001
  • For the development of a small-sized superconducting magnetic energy storage($\mu$SMES) system we designed, fabricated and tested a model coil consisting of five coils with different features. e.g. winding tensions. bore diameters and materials. cooling channels. The results show that even in the highly pre-stressed small coil the quench currents of the coils are degraded to about 70% of their coils critical current. The quench currents of the coils with natrow cooling channels are two times as high as that of the coil without spacers. The test results also indicate that the usual training effect depends on the winding tensions of the coils according to materials of the bobbin.

  • PDF

PHYSICS REVEALED BY BROAD-RANGE CO LADDERS AND FINE-STRUCTURE LINES IN M83

  • Wu, Ronin
    • 천문학논총
    • /
    • 제32권1호
    • /
    • pp.147-149
    • /
    • 2017
  • Since the launch of the Herschel Space Observatory, our understanding about the photo-dissociation regions (PDR) has taken a step forward. In the bandwidth of the Fourier Transform Spectrometer (FTS) of the Spectral and Photometric Imaging REceiver (SPIRE) on board Herschel, ten CO rotational transitions, including J = 4 - 3 to J = 13 - 12, and three fine structure lines, including [$C{\small{I}}$] 609, [$C{\small{I}}$] 370, and [$N{\small{II}}$] $205{\mu}m$, are covered. I present our findings from the FTS observations at the nuclear region of M83, based on the spatially resolved physical parameters derived from the CO spectral line energy distribution (SLED) map and the comparisons with the dust properties and star-formation tracers. This article discusses (1) the potential of using [$N{\small{II}$] 205 and [$C{\small{I}}$] $370{\mu}m$ as star-formation tracers; (2) the excitation mechanisms of warm CO in the nuclear region of M83.