• Journal of the Korean Ceramic Society
• /
• v.54 no.6
• /
• pp.506-510
• /
• 2017

One of the characteristics of polycrystalline graphene that determines its material properties is grain size. Mechanical properties such as Young's modulus, yield strain and tensile strength depend on the grain size and show a reverse Hall-Petch effect at small grain size limit for some properties under certain conditions. While there is agreement on the grain size effect for Young's modulus and yield strain, certain MD simulations have led to disagreement for tensile strength. Song et al. showed a decreasing behavior for tensile strength, that is, a pseudo Hall-Petch effect for the small grain size domain up to 5 nm. On the other hand, Sha et al. showed an increasing behavior, a reverse Hall-Petch effect, for grain size domain up to 10 nm. Mortazavi et al. also showed results similar to those of Sha et al. We suspect that the main difference of these two inconsistent results is due to the different modeling. The modeling of polycrystalline graphene with regular size and (hexagonal) shape shows the pseudo Hall-Petch effect, while the modeling with random size and shape shows the reverse Hall-Petch effect. Therefore, this study is conducted to confirm that different modeling is the main reason for the different behavior of tensile strength of the polycrystalline structures. We conducted MD simulations with models derived from the Voronoi tessellation for two types of grain size distributions. One type is grains of relatively similar sizes; the other is grains of random sizes. We found that the pseudo Hall-Petch effect and the reverse Hall-Petch effect of tensile strength were consistently shown for the two different models. We suspect that this result comes from the different crack paths, which are related to the grain patterns in the models.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.2
• /
• pp.195-200
• /
• 2011

A low power Hall thruster is under development for orbit maintenance of a small Earth observing satellite. Both cylindrical and annular type thrusters were manufactured and tested to characterize the performance of cylindrical Hall thrusters. Results were described through comparative analyses. Cylindrical thrusters were manufactured in two different channel diameter dimensions, 28 mm and 50 mm. Thrust, ion velocity and ion current were measured in various operating conditions. The results show that cylindrical thrusters are more efficient in mass utilization and voltage utilization, but less efficient in current utilization than annular one.

• Journal for History of Mathematics
• /
• v.27 no.3
• /
• pp.211-231
• /
• 2014

Although Monty Hall dilemma is used in many areas including philosophy, economics, and psychology, it is used in the current mathematics textbooks only as a material for reading or one of probability questions. The present study tries to explore students' understanding of Monty Hall dilemma through a class case. In this study, a group of high-school students participated in group activities, in which they read an argument about Monty Hall dilemma, and tried to resolve it through small-group and whole-class discussions, and then studied the conditional probability. The analysis supports the studies in psychology that intuitive understandings on probability do not change easily, and that counter-intuitivity in Monty Hall dilemma induces confusion and offers a basis for discussions among students. Similar results are anticipated when other dilemmas on probability are used.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.8 no.2
• /
• pp.51-73
• /
• 2004

A boundary layer analysis is used to study the effects of Hall and ion-slip currents on the steady magneto-micropolar of a viscous incompressible and electrically conducting fluid over a horizontal plate. By means of similarity solutions, deviation of fundamental equations on the assumption of small magnetic Reynolds number are solved numerically by using the shooting method. The effects of various parameters of the problem, e.g. the magnetic parameter, Hall parameter, ion-slip parameter, buoyancy parameter and material parameter are discussed and shown graphically.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.45 no.3
• /
• pp.335-340
• /
• 1996

The item and structure of current detector depends on the current in conductors. The Hall current detector of these detectors is to use the variation of Hall voltage to conductor's current and it is very difficult for the conventional type to detect small current. In this paper we study experimented-method that detect AC current by using the magnetic modulation method the current, 0[mA]~100[mA]. The experiments results in 5 percent against the conventional, 20 percent in linear error, 0.12[.DELTA.mV/.DELTA.mA] to conventional type, 50[.DELTA.mV/.DELTA.mA] in sensitivity. (author). 7 refs., 15 figs.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2009.10a
• /
• pp.735-736
• /
• 2009

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2009.10a
• /
• pp.737-738
• /
• 2009

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.11a
• /
• pp.625-626
• /
• 2008

• The Journal of Sustainable Design and Educational Environment Research
• /
• v.19 no.2
• /
• pp.21-31
• /
• 2020

The purpose of this study was to analyze the contents of the sound environment among the various environmental factors that directly or indirectly affect the quality of education through the remodeling of the small hall of the College of Humanities at W University. Before remodeling into a lecture room, the small hall of the College of Humanities at W University, which is the subject of this study, was designed to create an indoor sound environment suitable for a lecture room by recognizing differences in acoustic performance between the performance halls that require adequate sound quality and the lecture rooms where the clarity of voice is important. Therefore, this study aimed to present examples of improved acoustic performance in lecture rooms by remodeling through the stages of measuring acoustic performance before remodeling, presentation of a change in finishing materials through sound simulation, and measurement of sound performance after remodeling. It is expected that this process can be used as an example of securing indoor acoustic performance suitable for educational space, such as lecture rooms, by changing the finishing materials.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.5
• /
• pp.496-501
• /
• 2009

The thruster head unit of a 300 W cylindrical Hall thruster was developed for the propulsion system of small satellites. The magnetic topology in the thruster channel is a key parameter to achieve high performances. Two types of magnetic circuit structures were designed and manufactured to compare the thrust levels and efficiencies. Also the endurance test was conducted to measure the stable operation duration of the thruster head and to find degree of erosion after extended operation.