• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.28 no.4
• /
• pp.412-417
• /
• 1992

In full-speed cruising, the airborne sound pressure levels are measured from 11 small fishing boats operated around Cheju Island. In these measurement, 9 measuring positions are selected in each fishing boats. The results of measurements and analyses are as follows: 1. The sound pressure levels in FRP boats are higher than those in wooden boats. 2. The highest sound pressure level is 112dB(A) at the engine room in C boat, while the lowest one is 72dB(A) at the front deck in K boat. 3. The highest sound pressure level is shown to be in the frequency band less than 500Hz. 4. The highest sound pressure level is shown to be in the frequency band less than 500Hz. 5. Through all 9 positions, the sound pressure levels are higher in B and C boat and lower in E and K boats.

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.2
• /
• pp.118-124
• /
• 2008

Recently fishing industry is interested in efficiency and automation to acquire the international competitive power of national fishing industry. As an automation device of fishing boat, there are electric compasses using GPS and terrestrial magnetic sensor. Electric compass can be minimum size, high effectiveness with keeping the characteristic of a magnetic compass. This can be used a heading angle sensor to construct auto-navigation system in a small size ship. This paper develop electronic compass system that has serial output signal in NMEA 0183 and demonstrates the possibility of the electronics compass in navigation system for a small sized ship.

• Journal of Ocean Engineering and Technology
• /
• v.13 no.1 s.31
• /
• pp.130-137
• /
• 1999

The wing-flap stabilizing system attached under the hull bottom of a small fishing vessel to prevent the capsize by controlling the roll motions has been developed. This paper describes the background of the system design together with the experimental results. The effectiveness of the system is proven by the towing tank tests with a 1/4 scale model, showing that the roll motions of the model are much reduced by the active flap control in multidirectional irregular waves forward speeds.

• Proceedings of KOSOMES biannual meeting
• /
• 2017.11a
• /
• pp.53-53
• /
• 2017

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.19 no.2
• /
• pp.219-224
• /
• 2013

In the case of occurring marine oil pollution, it is the most effective way that to prepare all the necessary response resources in advance and to respond to incidents, but there are limits in reality. Therefore, may be an important alternative ways to use a fishing vessel registered in the affected area by massive marine oil pollution efficiently. In the United States and other developed countries, it is can be found that temporary response program by local fishing vessels(VOO program) has been developed and operated. This study was examined for sweeping arm system suitable for domestic small fishing vessels. The selected small vessel was as the model of Coastal gill-net and compound fishing vessel with classes of 2.5~3.5tons, length 8~9m, breath 2.5~2.8m, horsepower 200~250 HP and FRP materials. The developed equipment was designed that can be easily mounted on the model ship and portable structure. For increasing the field practicality, the weight of each part was composed less than 10kg for easy assembly and disassembly.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.30 no.4
• /
• pp.341-349
• /
• 1994

From the results of model tests, statistical regression analysis for EHP estimation based on hull form parameters is adopted in this study. From this result, the method for estimation of EHP and optimization of hull form parameters at the initial design stage of fishing boats is developed. This method is applied to two standard fishing boats with chine lines. The EHP s are estimated and compared to experimental results. From the optimization of four principal hull form parameters of these fishing boats, approximately 19% of resistance reduction at the design speed is achieved and thus certifies that this method can be used efficiently for the initial design of hull forms of fishing boats.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.6
• /
• pp.798-807
• /
• 2021

In the era of the fourth industrial revolution, Maritime Autonomous Surface Ship(MASS) are expected to emerge in the shipping industry. There has been much active research on collision avoidance systems regarding MASSs, but most of it has focused on merchant ships. A study of collision avoidance systems in fishing vessels is also essential, because Maritime Autonomous Surface Ships will encounter all type of vessels. In this study, the minimum passage distance between small-medium-sized fishing vessels and other vessels was investigated for the Ship's domain analysis. Based on the AIS data of Busan port and the adjacent area, the separation distances of fishing vessels were analyzed. The results indicated that as the speed of fishing vessels increased, the distance increased from 4L to 8L, and as length of the fishing vessels increased, the distance decreased from 10L to 6L. It is believed that the results of this study can be applied in the future to collision avoidance models for MASSs that reflect the domain of fishing vessels.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.54 no.4
• /
• pp.324-332
• /
• 2018

We conducted a questionnaire survey to analyze the current status of the coastal composite fisheries, as well as the improvement point in designing a new type coastal composite fishing boat suitable for Korean fishing environments from April to August 2017. The questionnaire composed of 20 questions about the features of the coastal composite fishing boat and fishing work. The survey sites were selected to cover all parts of the country by considering the geographical position. The significance testing for the response results was accessed by ${\chi}^2$ test and ANOVA. The results revealed that more than half (59.1%) of the fishermen operated one day per voyage and operating alone topped with 22.5% in the number of crews, followed by 2 persons (20.3%) and 5 persons (22.1%). The navigation devices had a high rate of installation and GPS plotter ranked first in the devices. In addition, fish finder ranked first in fishing equipment, followed by net hauler. The most inconvenient work that they felt during the fishing operation was fish handing at 49.8% and other general fishing works like setting and hauling line, deck cleaning accounted for about 25%. The hardest work was the accident by ropes wrapped around propeller and the engine trouble came in second. The most inconvenient facilities to the present design of fishing boat was wheelhouse (76.7%), followed by fish hold (38.5%), and deck (35.1%). Furthermore, inconvenient points related to the movement of fishing gear, noise and vibration of engine, slippery deck and small fish hold exceeded 50%.

• The Journal of Sustainable Design and Educational Environment Research
• /
• v.11 no.3
• /
• pp.1-12
• /
• 2012

This study identifies the ways of utilizing abolition schools and the problems possibly caused by amalgamating small schools in agricultural, mountain and fishing villages. This study aims to find ways to collaborate with the communities based on the characteristics of the districts where schools might be abolished, which can contribute to the development of the society. Following results are integrated by the theoretical framework, social and educational necessities, and analysis of the current situation about the utilization of abolition schools. First, alternative schools, characterized schools, specialized high school can be established as the result of abolition schools that are caused by lack of people in the city. Second, since it is easy for people to access to the agricultural, mountain, and fishing villages near cities, abolition schools in these areas can be used as experience facilities or training places for students and teachers. Third, in case of the abolition candidate schools in the agricultural, mountain, and fishing villages in the districts, students and village people can use the schools for education and social purposes. Fourth, when abolition schools are independently located from the agricultural, mountain, and fishing villages, they can be used as self-service places or local peoples' places for business.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.56 no.3
• /
• pp.341-346
• /
• 2023

This study aimed to suggest an alternative income generation (AIG) for local artisanal fisheries communities in the southern coastal area of Bangladesh, which is vulnerable to climate change. To analyze the problems of local artisanal fisheries caused by climate change, field surveys and in-depth interviews with fishermen and government officials were conducted. Livelihood risk factor (LRF) in the marine fishing sector included reduction of fishing days and fish production and damage to fishing vessels and fishing gear due to cyclone and sea-level rise. LRF in the aquaculture sector included cultured fish escape, reduction of aquaculture production, and water pollution due to Monsoon flood. A common challenge for two sectors was high interest rate on commercial loans. Small-scale tank aquaculture is recommended as AIG for securing income of artisanal fisheries communities. In the early stages of dissemination of small-scale tank aquaculture technology, it is necessary to prevent fishermen from struggling to repay high-interest rate loans through technology transfer and facility support by official development assistance. The aquaculture training center, along with the technical education, will also contribute toward expansion of local distribution network and marketing support to establish a value chain for local artisanal fisheries communities.