• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2002년도 제19회 학술발표대회 논문초록집
• /
• pp.37-40
• /
• 2002

The engine performance test was carried out to investigate the effects of breath and exhaust on the performance of a reciprocating engine for small aircraft. In this test, three valves to control flow areas of a inlet and two outlets were used, the engine manifold pressure and the static thrust of propeller were measured in nine breath/exhaust conditions. Generally, small variations on the performance were showed as the test conditions were changed. The manifold pressure was increased as flow area of the inlet or the outlet was decreased in normal condition, however it was decreased as both flow areas were decreased. The static thrust of propeller was showed similar as the manifold pressure.

• Tribology and Lubricants
• /
• 제30권3호
• /
• pp.156-167
• /
• 2014

This paper presents the test results of small dipstick-gage-type engine-oil-deterioration-detection sensor. The measured sensor signal characteristics for the capacitance and temperature are analyzed. The engine oil deterioration condition correlates with the electrical property of the dielectric constant that comprised with physical properties such as TAN (Total Acid Number), TBN (Total Base Number) and viscosity. Several problems encontered during the test of the sensor system are improved. The results of vehicle tests show that the capacitance signal is stable after the engine stops. Therefore, the sensor should start measuring the parameters for monitoring the engine oil condition after the engine stops. The engine is considered to be in a stopped state if the difference between the maximum and minimum values of the oil capacitance measured every 1 min is below 0.02 pF. The key test results in this paper will help in the development of an engine oil change warning algorithm.

• 한국가스학회지
• /
• 제10권3호
• /
• pp.1-6
• /
• 2006

본 연구는 석탄을 가스화한 저발열량 합성가스 연료의 가스엔진과 소형가스발전기로의 적용가능성을 보여준다. 석탄을 가스화한 저발열량 합성가스를 가스엔진의 연료로 사용하기 위해 상용 LPG엔진을 부분적으로 변경하였다. 석탄가스화 연료에 적합한 연료공급시스템 -공기유량조절 오리피스, 가스믹서, 기화기, 예열히터, 레귤레이터, 연료탱크-이 집중적으로 변경되었다. 엔진 운전 결과에서 비록 석탄가스화 연료의 엔진 출력이 LPG연료에 비해 다소 떨어지지만 석탄가스화 연료를 사용하는 엔진이 공회전 조건에서부터 교축밸브를 완전 개방한 전부하조건까지 잘 운전됨을 보여주었다. 또한 본 연구에서 개발된 가스엔진발전기는 다양한 부하에서도 잘 작동됨을 보여주었다.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2009년도 하계학술발표대회 논문집
• /
• pp.332-337
• /
• 2009

The importance of the evaluation and verification of small-size cogeneration system has been emphasized because there is no KS-code related to the small-size cogeneration system. The evaluation method of small-size engine cogeneration system, regarding Japanese standard JIS B-8122 and international standard organization, ISO-8528, was applied to the system. The evaluation methods, start-test, rapid-load-up and rapid-load-down, etc. were executed at the system, and reasonable results were acquired. The electrical and thermal efficiencies were executed and analyzed at various load conditions. The NOx emission at various load condition was also measured. Finally, the gas engine cogeneration system was installed to a site for actual usage and it was continually operated during more than 6 months as the site condition.

• 한국자동차공학회논문집
• /
• 제19권3호
• /
• pp.38-43
• /
• 2011

A CNG/diesel dual-fuel engine uses CNG as the main fuel and injects a small amount of diesel as an ignition priming. This study proposed the modification of the existing diesel engine into a dual-fuel engine that injects diesel with a high pressure by common rail direct injection (CRDI) and by injecting CNG at the intake port for premixing. And experiment was progressed for understanding about effect of CNG mixing ratio. The CNG/diesel dual-fuel engine showed equally satisfactory coordinate torque and power regardless of CNG mixing ratio. The PM emission was low at any CNG mixing ratio because of very small diesel pilot injection. In case of NOx and HC, high CNG mixing ratio showed low NOx and HC emissions at low speed. At medium & high speed, low CNG mixing ratio showed low NOx and HC emissions. Therefore, it would be optimized by controlling CNG mixing ratio.

• 한국가스학회지
• /
• 제24권6호
• /
• pp.28-33
• /
• 2020

수소 연료를 적용한 2행정 기반의 소형 SI 엔진의 성능 특성에 관하여 살펴보았다. 이를 위하여 주로 모형 항공기용으로 사용되는 210 cc급 엔진을 비롯하여 소형 동력계 및 수소연료와 엔진 오일 공급을 위한 장치를 포함한 실험을 구성하였다. 우선 가솔린 연료를 공급한 기본 상태의 엔진 출력과 토크를 측정해 보았으며, 최대 6 kW 수준의 출력을 확인하였다. 이후 수소 연료를 공급하면서 성능 시험을 수행하였는데, 수소의 경우에는 공기과잉율 기준 공연비가 낮아질수록 즉, 연료 공기 혼합기가 농후해 질수록 역화 현상이 발생하여 출력에 제한이 생길 뿐만 아니라 엔진 하드웨어에도 치명적인 영향을 줌을 확인하였다. 따라서 공기과잉율을 기준 수치 이상에서 엔진을 운전하며 안정적인 수준의 연소를 통하여 가솔린 성능의 절반 수준인 최대 3 kW 의 출력 성능이 나옴을 최종 확인하였다.

• 한국자동차공학회논문집
• /
• 제4권6호
• /
• pp.65-77
• /
• 1996

A small-sized industrial diesel engine was converted to a spark ignited engine and then adapted for fuelling with natural gas. After conversion work, general combustion characteristics of the gas engine(such as ignition delay, main and total combustion durations, and heat release characteristics) were studied as a functio of major engine operating variables such as air to fuel ratio, spark timing, and spark plug type. Some other studies on cyclic variation characteristics in IMEP, Pmax and (dp/dφ)max, and also optimum combustion phasing angle were performed.

• 항공우주기술
• /
• 제2권2호
• /
• pp.186-198
• /
• 2003

15kg급 소형무인기의 동력장치 개발을 위한 연구로서 엔진 개조에 따른 성능변화를 측정하기 위하여 소형엔진 성능시험대를 제작 및 개량하였고, 추가적인 성능 개량을 위한 향후계획을 도출하였다. 표준적인 엔진시험방법을 통해 엔진의 성능을 평가하여 문제점을 찾아내고 개선하여 목표한 장기체공형 무인기 엔진 개발을 완수할 수 있도록 엔진성능 표준 시험장치를 구성하였다. 엔진성능 표준시험 장치를 이용하여 가솔린 연료를 사용하는 개조된 엔진의 성능을 측정하고 이의 과정 및 엔진성능과 관련한 문제점들을 제시하였다.

• 동력기계공학회지
• /
• 제2권2호
• /
• pp.20-26
• /
• 1998

Heat release data were obtained by analysis of cylinder diagrams from a test engine, naturally-aspirated small-size four-stroke DI diesel engine. These data were used to decide empirical coefficients of Whitehouse-Way's model, single zone combustion model. Finally, the comparison of calculated with experimental results was performed, and the accuracy of calculated versus experimental data of the model in predicting engine heat release and cylinder pressure was demonstrated.

• 수산해양기술연구
• /
• 제24권1호
• /
• pp.30-35
• /
• 1988

An electrical power generation system driven by main engine shaft, briefly SG system for middle or small size fishing boat is studied experimently. In the SG system, power transmission is performed by a variable displacement hydraulic pump driven by the main engine and a constant displacement hydraulic motor. It was verified that the SG system enabled the generation of electrical power with constant frequency regardless main engine speed. In the SG system, setting reference frequency, sensing generator output frequency and setting controller parameters are performed by performed by programming in a microcomputer, so a countermeasure for physical situations of control object is very easy. Futhermore, the SG system has following features; low initial installation cost, wide freedom of installation in engine room, advantage of application in existing ships, especially fishing boat with hydraulic fishing equipments.