• 한국환경과학회지
• /
• 제7권6호
• /
• pp.793-801
• /
• 1998

In this study, the Dilution Method is used to measure river discharge through the hydraulic model test. the dilution method is divided into Constant-Rate-Infection Method and Slug-Injection Method in the river discharge measurement techniques. When the dilution method is applied in the hydraulic model flume, it is analyzed that the estimated error of constant-rate-injection method is less than that of the slug-in-jection method, and the result shows that floodflow analysis is more efficient than lowflow analysis as compared observed discharge with calculated discharge. The result of statistical error analysis shows that the constant-rate-injection method is appropriate technique for the measurement of the river discharge. Therefore, the dilution method among the river discharge measurement techniques can be applied for the river basin which can't be measured with current meter or unsteady-flow regime in the urban-small drainage or hydraulic structure equipment area and can be obtained more exact results than any other discharge measurement techniques.

• 한국해양공학회지
• /
• 제35권1호
• /
• pp.38-49
• /
• 2021

Slug flow is the most common multi-phase flow encountered in oil and gas industry. In this study, the hydrodynamic features of flow in pipes investigated numerically using computational fluid dynamic (CFD) simulations for the effect of slug flow on the vertical and bent pipeline. The compressible Reynold averaged Navier-Stokes (RANS) equation was used as the governing equation, with the volume of fluid (VOF) method to capture the outline of the bubble in a pipeline. The simulations were tested for the grid and time step convergence, and validated with the experimental and theoretical results for the main hydrodynamic characteristics of the Taylor bubble, i.e., bubble shape, terminal velocity of bubble, and the liquid film velocity. The slug flow was simulated with various air and water injection velocities in the pipeline. The simulations revealed the effect of slug flow as the pressure occurring in the wall of the pipeline. The peak pressure and pressure oscillations were observed, and those magnitudes and trends were compared with the change in air and water injection velocities. The mechanism of the peak pressures was studied in relation with the change in bubble length, and the maximum peak pressures were investigated for the different positions and velocities of the air and water in the pipeline. The pressure oscillations were investigated in comparison with the bubble length in the pipe and the oscillation was provided with the application of damping. The pressures were compared with the case of a bent pipe, and a 1.5 times higher pressures was observed due to the compression of the bubbles at the corner of the bent. These findings can be used as a basic data for further studies and designs on pipeline systems with multi-phase flow.

• 지질공학
• /
• 제32권1호
• /
• pp.127-142
• /
• 2022

This study explored the fluid transfer characteristics of simultaneous pneumatic blasting, plasma blasting, and vacuum suction (the PPV method), and assessed their effect. Chemical oxidation-an established soil remediation method-was compared as a control. Electrical resistivity surveys found that PPV reduced resistivity by about 1.5-2.5 times compared with the control group, indicating that it increased the diffusion of fluid between the injection and suction wells. Injection and suction tests comparing the injection flow rate, initial suction flow rate time, and suction flow rate showed that the PPV method offered an improvement over the existing method. Slug tests revealed that PPV increased the permeability coefficient by a greater amount than that by the control method. This study qualitatively and quantitatively confirmed that the PPV method clearly improves injection and suction efficiency by accelerating cracks in the ground and improving water permeability compared with the established chemical oxidation method.

• 대한화학회지
• /
• 제6권2호
• /
• pp.130-132
• /
• 1962

A new method of evaluating the mixing time in the continuous flow stirred tank is herein proposed. Experimental results to test the concept are also presented.The mixing time is defined as the time interval between the injection of a slug of an electrolyte solution into the tank and the moment at which an essentially straight line begins on a plot of the conductivity of effluent versus time.The proposed method of measuring the mixing time is valid even for the low mixing time (5 seconds) and the results obtained agree well with previous work, where the mixing time measurements were carried out by the injection of a dye into the feed stream.

• 지질공학
• /
• 제11권1호
• /
• pp.63-79
• /
• 2001

본 연구에서는 금정산 불국사화강암지역의 19개 시추공(직경 3" 6개공과 직경 6" 13개공)에서 순간충격 시험을 실시하고, 세 가지 순간충격시험방법(Cooper-Bredehoeft-Papadopulos법, Hvorslev법, Bouwer & Rice법)으로 수리적 매개변수들을 결정하였다. 각 시험공의 수리적 특성은 시추코어자료와 연계하여 평가하였다. 연구지역을 네 개의 소구역으로 나누어 각 구역에 대한 수리적 매개변수의 차이도 비교하였다. 또한, 세 가지 순간충격시험분석으로 구해진 수리상수들간의 관련성을 검토하였다. 슬러그의 주입과 회수에 의해서 발생하는 수리전도도의 차이는 시험공 주변의 투수성 균열의 분포와 슬러그의 압력변화에서 발생하는 세립질 물질의 교란 및 침전에서 유래하는 것으로 판단된다. 세 가지 순간충격시험분석으로 구한 수리전도도값은 $10^{-8}$~$10^{-5}$m/sec의 범위를 보이며, 평균값은 $10^{-7}$~$10^{-5}$m/s의 범위를 보인다. 또한, 투수량계수는 $10^{-7}$~$10^{-5}$$m^2$/sec의 범위를 보인다. Cooper-Bredehoeft-Papadopulos(C-B-P)법, Hvorslev법, Bouwer & Rice법으로 구한 평균 수리전도도를 서로 비교하면, Hvorslev법으로 구한 수리전도도가 가장 크고, 다음으로는 Bouwer & Rice법, C-B-P법으로 나타난다.