• Journal of the Korea Computer Industry Society
• /
• v.2 no.6
• /
• pp.817-826
• /
• 2001

In this paper, the method of processing a blurred noisy signal has been researched. The conventional method of processing signal has faults which are slow-convergence speed and long time-consuming process at the singular point and in the ill condition. There is the process, the Gauss-Seidel's method to remove these faults, but it takes too much time because it processes signal repeatedly. For overcoming the faults, this paper shows a signal process method which takes shorter than the Tikhnov-Miller's by comparing the Tikhnov-Miller's with proposed algorithm and accelerating convergence speed at the singular point in the ill condition. In this paper, the conventional process method and proposed optimal algorithm were used to get a standard image (256 ＊ 256 ＊ 8bits),and then the results are simulated and compared each other in order to examine the variance of MSE ( Mean-Square Error ) by the acceleration parameter in the proposed two dimensional signal procedures. The result of the signal process and the processing time was measured at all change of acceleration parameter in order to verify the effectiveness of the proposed algorithm.

• Journal of Wetlands Research
• /
• v.9 no.2
• /
• pp.71-84
• /
• 2007

Masan Bay is a representative semi-closed bay acted as a sedimentation reservoir with a slow current velocity and a poor water circulation in Korea. The pollutants from terrestrial sources into the Masan Bay have apparently environmental pollution problems, such as eutrophication, red tied, and hypoxia. In this study, An ecological modeling work was performed to estimate the material circulation including the growth of bivalve in ecosystem. Furthermore, the effect of water purification was calculated by filter feeding bivalve to particulate organic matter just like COD and phytoplankton. And Water quality management strategy by bio-purification of bivalve is derived through selection of location, quantification of bivalve aquaculture farm. The results showed that the optimum location for bivalve farming is where phytoplankton accumulation by physical processes is maximized and the optimum density and area of bivalve are 35 individuals $m^{-3}$ and ca. 500 hectare, respectively. When assuming conditions for the optimum growth of bivalve, COD could decrease by up to 18% even without other reduction of pollution loads.

• Communications of Mathematical Education
• /
• v.30 no.4
• /
• pp.435-452
• /
• 2016

This study was designed to explore students' instrumentalization in relation to the van Hiele's teaching method within a technology environment using GeoGebra. To carry out the study, a total of 4 lesson units was developed based on van Hiele teaching method for two slow learners in Gyeonggi province, Korea. The results of study were as follows. Instrumentalization of students was actualized from preparation, to adaptation, and to application stages. In preparation, and adaptation stages, depending on visualization, students used a trial-and-error method a lot, however in application stage the role of GeoGebra was just to check the solution of what they conjectured. Therefore, a teacher should prepare geometric tasks according to the processes of instrumentalization based on geometric teaching method. During instrumentalization and instrumentation of users, usage scheme(US) and instrumented action scheme(IAS) should be concrete.

• Korea-Australia Rheology Journal
• /
• v.13 no.4
• /
• pp.205-217
• /
• 2001

This review article summarizes results of recent viscoelastic and dielectric studies for entangled cis-polyisoprene (PI) chains. The PI chains have the so-called type-A dipoles parallel along the chain backbone, and their slow viscoelastic and dielectric relaxation processes reflect the same global chain motion. However, this motion is differently averaged in the viscoelastic and dielectric properties, the former representing the isochronal orientational anisotropy of individual entanglement segments while the latter detecting the orientational correlation of the segments at two separate times (0 and t). On the basis of this difference, the viscoelastic and dielectric data of the entangled PI chains were compared to elucidate detailed features of the chain dynamics. Specifically, the molecular picture of dynamic tube dilation (DTD) incorporated in recent models was tested for linear and star PI chain. The comparison revealed that the DTD picture was valid for linear PI chains but failed for the star PI chains in the dominant part of the terminal relaxation. The failure for the star chains was related to the pre-requisite for the DTD process, rapid equilibration of successive entanglement segments through their constraint release (CR) motion: For the star chains, the dilated tube diameter expected in the terminal regime was considerably large because of a broad distribution of motional modes of the chains, so that the CR-equilibration required for DTD could not occur in time. The terminal relaxation of the star chain appeared to occur through the CR process before the expected DTD process was completed. The situation was different for the linear chain exhibiting narrowly distributed motional modes. The dilated tube expected for the linear chain was rather thin and the required CR-equilibration occurred in time, resulting in the success of the DTD picture. These detailed features of the chain dynamics was revealed only when the viscoelastic and dielectric properties were compared, demonstrating the importance of this comparison.

• Science of Emotion and Sensibility
• /
• v.1 no.2
• /
• pp.13-22
• /
• 1998

The sense of touch has both objective and subjective characteristics. During hand evaluation of the fabrics. psycho physiological processes such as emotion and stimulation. On other site, the mode of touch (passive vs. active) is also capable to modulate somatosensory responses. I.e., suppress somatocensory perception during active electrocortical responses to passive and active touch of the textiles with different subjective emotional preference. The study was carried out on 36 female college students. Physiological signals were acquired by Grass and BIOPAC 100 systems with AcqKnowledge variables, namely heart rate (HR), respiratory sinus arrhythmia (RSA), pulse transit time (PTT), respiration rate (RSP) and skin conductance parameters (SCL, amplitude, risetime and number of SCRs) were analyzed for baseline and stimulation conditions. Analysis was manifested in a form of moderate HR acceleration. RSP increase, RSA decrease (lowered vagal tone), decreased PTT and increased electrodermal activity (increased SCL, several SCRs) that reflects general sympathetic activation. Parietal EEG effects (on contra-lateral side to stimulated hand)were featured by short-term alpha-blocking, slightly reduced theta, significantly increased delta and enhanced fast beta activity with few variations across stimuli. The main finding of the study was that most and least preferred textures exhibited significant differences in autonomic (HR, RSP, PTT, SCR, and at less extent in RSA and SCL) and electrocortical responses (delta, slow and fast alpha, fast beta relative power). These differences were recorded both in passive and active stimulation modes, thus demonstrating reproducibility of distinction between most and least emotionally preferred tactile stimuli, suggesting influence of psychological factors, such as emotional property of stimulus, on physiological outcome.

• Proceedings of the Korean Society for Food Science of Animal Resources Conference
• /
• 2000.11a
• /
• pp.1-14
• /
• 2000

The Near Infrared region of the energy spectrum was first discovered by Hershel in the year 1800. The principles of NIR is based on light absorption of specific organic chemical bonds. The absorption at each wavelength is measured and a spectre is obtained. The spectre is then treated mathematically and with the absorption data is converted to absolute units via a calibration. In the last two decades it has developed dramatically. With the invention of computers and the ability to treat a large amount of data in a very short time the use of NIR for many different purposes has developed very fast. During the last decade with the aid of very powerful PC's the application of NIR technology has become even more widespread. Now or days development of very robust calibrations can be done in a relatively short time with a minimum of resources. The use of Near Infrared Spectroscopy (NIR) in the Meat industry is relatively new. The first installations were taken into operation in the 80ties. The Meat Industry in often referred to as rather conservative and slow to embrace new technologies, they stay with the old and proven methods. The first NIR instruments used by the Meat Industry, and most other industries, were multipurpose build, which means that the sample presentation was not well suited to this particular application, or many other applications for that sake. As the Meat Industry grows and develops to meet the demands of the modern markets, they realise the need for better control of processes and final products. From the early 90 ties and onward the demand for 'rear time' rapid results starts growing, and some suppliers of NIR instruments (and instruments based on other technologies, like X-ray) start to develop and manufacture instrumentation dedicated to the particular needs of the Meat Industry. Today it is estimated that there are approximately 2000 rapid instruments placed in the Meat industry world-wide. By far most of these are used as at-line or laboratory installations, but the trend and need is moving towards real on-line or in-line solutions. NIR is the most cost effective and reproducible analytical procedure available for the twenty first century.

• Macromolecular Research
• /
• v.12 no.4
• /
• pp.399-406
• /
• 2004

Glass-like carbon precursors shrink significantly during curing and carbonization, which leads to crack formation and bending. Cured furan resin powder and ethanol were added to furan resin to diminish the weight loss, to suppress the shrinkage and bending, and to readily release the gases evolved during polymerization and curing. Curing and carbonization were controlled by pressure and slow heating to avoid damage to the samples. The effect of the filler and ethanol on the fabrication process was examined by measuring the properties of the glass-like carbon, such as the specific gravity, bending strength, electrical resistivity, and microstructural change. The specific gravities of the filler-added glass-like carbons were higher than those of the ethanol-added samples because of the formation of macropores from the vaporization of ethanol during the curing and polymerization processes. Although the ethanol-added glass-like carbons exhibited lower bending strengths after carbonization than did the filler-added samples, the opposite result was observed after aging at 2,600$^{\circ}C$. We found that the macropores created from ethanol were contracted and removed upon heat treatment. The electrical resistivity of the glass-like carbon aged at 2,600$^{\circ}C$ was lower than those of the samples carbonized at 1,000$^{\circ}C$. We attribute this phenomenon to the fact that aging at high temperature led to well-developed microstructures, the removal of macropores, and the reduction of the surface area.

• Journal of Hydrogen and New Energy
• /
• v.23 no.3
• /
• pp.285-292
• /
• 2012

The integrated gasification combined cycle (IGCC) system is well known for its high efficiency compared with that of other coal fueled power generation system. IGCC offers substantial advantages over pulverized coal combustion when carbon capture and storage (CCS) is required. Commercial plants employ different types of quenching system to meet the purpose of the system. Depending on that, the downstream units of IGCC can be modeled using different operating conditions and units. In case with $CO_2$ separation and capture, the gasifier product must be converted to hydrogen-rich syngas using Water Gas Shift (WGS) reaction. In most WGS processes, the water gas shift reactor is the biggest and heaviest component because the reaction is relatively slow compared to the other reactions and is inhibited at higher temperatures by thermodynamics. In this study, tehchno-econimic assessments were found according to the quench types and operating conditions in the WGS system. These results can improve the efficiency and reduce the cost of coal gasification.

• Journal of Fashion Business
• /
• v.11 no.3
• /
• pp.79-86
• /
• 2007

The purpose of this study is to understand the dyeing properties and color analysis of fabrics knitted with ramie, cotton, wool and acrylic by using scoria and to analyze whether the knitted fabrics can be used for industrialization by measuring color fastness after and before sliver-nano process. The following is the conclusions. Firstly, when ramie fabric regarding cotton, wool and acrylic was dyed at the temperature of $50^{\circ}C$ for fifteen minutes by using 10, 25, 50, 100g/ $\ell$ of scoria, dyeing absorption gradually increased up to 50g/ $\ell$, and over the point of 50g/ $\ell$ it showed slow increase. Secondly, regarding saturation, among ramie fabric, wool, cotton and acrylic, wool appears as the lowest brightness. Therefore, it can be dyed with bright color and the highest value. In terms of the value of chromaticity, wool also emerges as the lowest brightness. On the contrary, acrylic showed the lightest red as it had the value of the smallest b. Cotton takes the lightest yellow as the b value of the cotton showed the smallest. Thus, scoria dyestuff is a material that showed strong red and yellow on knitted fabric mixed with wool that is the biggest a. b value. Thirdly, in terms of dyeing fastness, sunlight fastness did not show noticeable differences before and after silver-nano processes, but in terms of washing and friction fastness, the material processed by silver-nano indicated that all knitted fabrics are over 4-5 point. which means silver-nano process can be effective for the industrial applications. As mentioned above, as a result of dyeing knitted fabrics with scoria, this study found a possibility of dyeing in the fabric materials, and if there is deeper dyeing experiments, fastness experiments and speculations, it might be possible to be a big issue just like loess and charcoal.

• Journal of Korean Society on Water Environment
• /
• v.20 no.3
• /
• pp.197-205
• /
• 2004

Batch test methods have developed for a long time to measure kinetic and stoichiometric parameters which are required to perform steady state design and mathematical modelling of activated sludge processes. However, at various So/Xo ratios, abnormal behaviors of ordinary heterotrophic organism in batch tests have been reported in many researches. Thus, in this research, abnormal behaviors of heterotrophs in batch tests were investigated at various So/Xo conditions by measuring and interpreting oxygen utilization rate. As So/Xo ratio increased, the calculated values of maximum specific growth rates, ${\mu}_{H,max}$ and $K_{MP,max}$, increased. However, at a certain point of So/Xo (around 10mgCOD/mgMLAVSS), ${\mu}_{H,max}$ and $K_{MP,max}$ values started to decrease. According to this observation, three prominent behaviours of heterotrophs were identified at various So/Xo conditions. (1) At low So/Xo region (below 5 mgCOD/mgMLAVSS), the oxygen utilization rate of heterotrophs in batch tests were almost stable and consequently yielded lower maximum specific growth rate. (2) At high So/Xo region (up to 5~10 mgCOD/mgMLAVSS), oxygen utilization rate incresed sharply with time and indicated more upward curvature than the predicted OUR with conventional activated sludge model, which consists of single hetetrotrophs group. Thus, in this region, competition model of two organisms, fast-grower and slow-grower, seemed to be appropriate. (3) At extremely high So/Xo region (over 10mgCOD/mgMLAVSS), significant oxygen utilization rate was still observed even after depletion of readily biodegradable COD. This might be caused by retarded utilization of intermediates which were generated by self inhibition mechanism in the process of RBCOD uptake.