• 패션비즈니스
• /
• 제11권3호
• /
• pp.79-86
• /
• 2007

The purpose of this study is to understand the dyeing properties and color analysis of fabrics knitted with ramie, cotton, wool and acrylic by using scoria and to analyze whether the knitted fabrics can be used for industrialization by measuring color fastness after and before sliver-nano process. The following is the conclusions. Firstly, when ramie fabric regarding cotton, wool and acrylic was dyed at the temperature of $50^{\circ}C$ for fifteen minutes by using 10, 25, 50, 100g/ $\ell$ of scoria, dyeing absorption gradually increased up to 50g/ $\ell$, and over the point of 50g/ $\ell$ it showed slow increase. Secondly, regarding saturation, among ramie fabric, wool, cotton and acrylic, wool appears as the lowest brightness. Therefore, it can be dyed with bright color and the highest value. In terms of the value of chromaticity, wool also emerges as the lowest brightness. On the contrary, acrylic showed the lightest red as it had the value of the smallest b. Cotton takes the lightest yellow as the b value of the cotton showed the smallest. Thus, scoria dyestuff is a material that showed strong red and yellow on knitted fabric mixed with wool that is the biggest a. b value. Thirdly, in terms of dyeing fastness, sunlight fastness did not show noticeable differences before and after silver-nano processes, but in terms of washing and friction fastness, the material processed by silver-nano indicated that all knitted fabrics are over 4-5 point. which means silver-nano process can be effective for the industrial applications. As mentioned above, as a result of dyeing knitted fabrics with scoria, this study found a possibility of dyeing in the fabric materials, and if there is deeper dyeing experiments, fastness experiments and speculations, it might be possible to be a big issue just like loess and charcoal.

• 한국전자파학회논문지
• /
• 제23권7호
• /
• pp.774-783
• /
• 2012

본 논문에서는 주기적인 요철 모양의 구조를 이용하여 인접해 있는 선로 간의 누화(crosstalk) 감소 효과를 갖는 전송 선로를 제안한다. 요철 모양의 전송 선로는 인접한 선로 간의 유도성 커플링과 용량성 커플링의 크기를 동일하게 조절이 가능하다. 따라서 유도성과 용량성의 커플링이 서로 상쇄되기 때문에 누화 감소 효과를 갖는다. 요철 모양의 전송 선로는 비유전율이 3.38이며, 두께가 0.508 mm인 RO4003 기판 위에 설계하였다. 전산모의 실험 결과, 일반적인 전송 선로와 주기 간격이 A=1 mm인 요철 모양 전송 선로의 far-end 누화는 30 GHz까지 각각 최대 -3.6 dB와 -22 dB 값을 가진다. 측정 결과, 일반적인 전송 선로와 A=1 mm인 요철 모양 전송 선로의 far-end 누화는 30 GHz까지 각각 최대 -6.3 dB와 -20.5 dB 값을 가진다.

• 대한예방한의학회지
• /
• 제14권3호
• /
• pp.37-49
• /
• 2010

Objective : Qigong has been reported as an effective for post-mastectomy women. It consists of a series of postures combined with slow, smooth, graceful movements, and is considered a low intensity exercise. In this study, a specialist of Qigong developed a Qigong program for post-mastectomy women in a community. The object of this research is to evaluate the effect of Qigong on a subjective symptom scale, on the grade of discomfort and pain in everyday life, BMI, fat(%), muscular strength, shoulder joint movement, in post-mastectomy women. Methods : The study used a non-equivalent control group non-synchronized design. The experimental group received a Qigong 3 times a week for 12 weeks from September 7th to December 28th in 2009. The subjects were 40 patients are divided into 25 persons in experimental groups and 15 persons in contrastive group. The data were analyzed with descriptive statistics, chi-square test, t-test, Mann-Whitney U test. A P-value less than .05 was considered significant by 2-tailed test. All statistical analyses were performed with SPSS win(ver 12.0). Results : The results were as follows : The score in the subjective symptom(p=.040), and score of anxiety (p=.024), fat(%)(p=.007) were significantly decreased after Qigong program. The values for shoulder flexibility (left : p=.010, right : p=.008), and Muscular strength(grip power)(left : p=.021, right : p=.029) significantly increased after Qigong program. And Flexion(left ; p=.029), Extension(left : p=.001, right : p=.038), Adduction(left ; p=.001, right ; p<0.001) were also significantly increased after Qigong Conclusions : The Qigong is an effective health promotion program for post-mastectomy women.

• Archives of Plastic Surgery
• /
• 제38권4호
• /
• pp.345-350
• /
• 2011

Purpose: Although platelet-rich plasma (PRP) potentiate the wound healing activity of adipose-derived stem cells (ADSCs), its effect cannot be sustained for a prolonged period of time due to short duration of action. This led us to design and produce platelet-rich fibrin (PRF), in an effort to develop a tool which lasts longer, and apply it on wound healing. Methods: Two symmetrical skin defects were made on the back of seven nude mice. ADSCs were applied to each wound, combined with either PRP or PRF. The wound area was measured over 14 days. By day 16, the wound was harvested and histologic analysis was performed including counting of the blood vessel. Results: The healing rate was more accelerated in PRP group in the first 5 days (p<0.05). However, PRF group surpassed PRP group after 6 days (p<0.05). The average number of blood vessels observed in the PRF group was $6.53{\pm}0.51$, compared with $5.68{\pm}0.71$ for the PRP group. Conclusion: PRF exerts a slow yet pervasive influence over the two-week course of the wound healing process. Thus, PRF is probably more beneficial for promoting the activity of ADSCs for a sustained period of time.

• 한국물환경학회지
• /
• 제20권3호
• /
• pp.197-205
• /
• 2004

Batch test methods have developed for a long time to measure kinetic and stoichiometric parameters which are required to perform steady state design and mathematical modelling of activated sludge processes. However, at various So/Xo ratios, abnormal behaviors of ordinary heterotrophic organism in batch tests have been reported in many researches. Thus, in this research, abnormal behaviors of heterotrophs in batch tests were investigated at various So/Xo conditions by measuring and interpreting oxygen utilization rate. As So/Xo ratio increased, the calculated values of maximum specific growth rates, ${\mu}_{H,max}$ and $K_{MP,max}$, increased. However, at a certain point of So/Xo (around 10mgCOD/mgMLAVSS), ${\mu}_{H,max}$ and $K_{MP,max}$ values started to decrease. According to this observation, three prominent behaviours of heterotrophs were identified at various So/Xo conditions. (1) At low So/Xo region (below 5 mgCOD/mgMLAVSS), the oxygen utilization rate of heterotrophs in batch tests were almost stable and consequently yielded lower maximum specific growth rate. (2) At high So/Xo region (up to 5~10 mgCOD/mgMLAVSS), oxygen utilization rate incresed sharply with time and indicated more upward curvature than the predicted OUR with conventional activated sludge model, which consists of single hetetrotrophs group. Thus, in this region, competition model of two organisms, fast-grower and slow-grower, seemed to be appropriate. (3) At extremely high So/Xo region (over 10mgCOD/mgMLAVSS), significant oxygen utilization rate was still observed even after depletion of readily biodegradable COD. This might be caused by retarded utilization of intermediates which were generated by self inhibition mechanism in the process of RBCOD uptake.

• 한국산학기술학회논문지
• /
• 제22권1호
• /
• pp.37-44
• /
• 2021

수소연료전지차(FCEV)는 전기를 자체 생산하는 연료전지를 동력원으로 하고 있으며 기존 기계식 레귤레이터의 출구압은 시스템 사양에 의해 제작 시점에서 고정되며 순간적인 수소 공급량에 의한 출구압 강하가 발생하는 경우 수소의 공급유량이 부정확해지는 문제가 있다. 본 연구에서는 기존에 존재하는 1단 기계식 감압 레귤레이터를 보완하기 위한 2단 감압 레귤레이터의 형상 설계 및 재질 선정을 수행하였다. 2단계 감압을 통한 맥동과 느린 응답을 보상하고 고압 편차 문제를 해결하기 위해 감압 유닛의 접촉면 형상을 가공성을 고려하여 설계하였다. 기밀성 측면에서 TPU의 변형량은 최대 15.82% 작은 변위량을 보였으며, 재질 선정에서는 2단 감압에 보편성을 확보하고 다양한 수소 연료 공급시스템에 적용 가능한 전자식 솔레노이드를 고려하여 자성체를 선정하고 적절한 도금 종류를 검증하기 위한 수소 취성 및 내식성 평가를 실시하였다. 시편의 표면 부식은 Cr 도금의 경우에서만 발생되지 않았으며, 인장 시험을 통해 부식과정간 연신율을 비교하였을 때, 2% 이내의 차이를 확인하였다.

• 한국정보통신학회논문지
• /
• 제25권3호
• /
• pp.339-345
• /
• 2021

코로나19로 인해 온라인 교육이 발달하면서 교육에 AI, AR/VR등의 신기술을 결합한 에듀테크 시장이 급격히 성장하고 있다. 또한, 1가구 1자녀 가정이 늘면서 자녀에 대한 투자가 집중됨에 따라 매년 출산율이 줄어듦에도 불구하고 키즈 산업은 꾸준히 성장 중이다. 그러나 늘어나는 수요에 비해 에듀테크 시장의 콘텐츠 공급은 더딘 편이다. 이에 본 논문에서는 AR 기술을 이용하여 편의성, 실용성, 효율성을 갖춘 AR 키즈 콘텐츠를 개발하고 지원함으로써 이러한 문제를 해결 하는데 도움을 주는 것을 목적으로 한다. 유아 어휘 학습 지원용 AR 콘텐츠는 단순히 보고 듣는 것이 끝이 아니라, 콘텐츠를 직접 조작해볼 수 있는 관찰 조작형 모델이라 유아의 흥미를 유발하고 아동의 단어학습에 도움을 준다. 본 논문은 본격적인 언어발달이 나타나는 생후 15개월 이상 36개월 이하의 유아를 대상으로 한다.

• 한국의류산업학회지
• /
• 제24권1호
• /
• pp.127-137
• /
• 2022

Recently, various clothing items are being developed using 3D printing technology, but comfort has become an issue while wearing them for a long time. Therefore, this study researched on how the temperature and humidity of the devices developed by 3D printing change depending on the material combination. Five types of material combinations (EVA foam, TPU density 10%, TPU density 30%, EVA foam+TPU density 10%, and EVA foam+TPU density 30%) were selected as variables, and the experiment was conducted for two different cases with and without a cover. All the ten types of samples were placed on the hot plate set at 36℃, and the surface temperature and humidity were measured at three different points for 10 minutes. As a result, the case with only TPU showed the greatest temperature change while the case with 100% EVA foam showed the least temperature change. The humidity of the surface layer gradually decreased with time for 100% EVA foam. For the case with TPU materials, the moisture was transferred to the surface layer at first, thereby increasing the humidity but then dropped significantly. Meanwhile, the cases with the cover on showed similar tendencies of change in both temperature and humidity where the overall temperature and humidity delivery were slow.

• 대한조선학회논문집
• /
• 제59권4호
• /
• pp.214-224
• /
• 2022

It is necessary to estimate manoeuvring characteristics of submerged bodies at the design stage in order to ensure the safe operations. In this study, added mass coefficients in the mathematical model of submerged bodies are estimated by captive model tests and numerical calculations. Two kinds of models, MARIN 'BB2'submarine model and AUV (Autonomous unmanned vehicle) model are utilized in the forced oscillation tests. Compared to BB2 submarine, AUV with cylindrical type hull form shows relatively small added masses in roll, pitch, and yaw directions. Next, numerical calculations based on potential theory are performed under the assumption that viscous effects on inertia forces are negligible. Added masses obtained by numerical calculations are in good agreements with forced oscillation test results. And if slow manoeuvres of submerged bodies are presumed, some of velocity coupled terms can be approximated by combinations of added mass coefficients.

• 한국초지조사료학회지
• /
• 제42권3호
• /
• pp.146-154
• /
• 2022

This experiment was conducted to evaluate the growth characteristics and productivity of silage corn varieties developed in Korea. Corn cultivation was carried out using the experimental field in the Pyeongchang campus of Seoul National University (550 m above sea level). There have 10 domestic cultivars (Gwangpyeongok, Dacheongok, Yanganok, Jangdaok, Cheongdaok, Daanok, Sinhwangok, Sinhwangok II, Pyeonggangok, and Hwangdaok) with one imported cultivar (P1543) which tested as a control, and randomized block design with three replications. Among the 100-grains weight of the seeds, Dacheongok was the heaviest, and the germination rate for each variety was 74.6% on average, while that of Daanok and Sinhwangok were over 90%. Sinhwangok was the fastest in tasseling and silking date. The number of days required to be silking date was as slow as 85 days in Dacheongok, Cheongdaok and Pyeonggangok, and as fast as 80 days or less in Sinhwangok, Sinhwangok II and Hwangdaok. The plant height of P1543 was the highest as 344cm, and Hwangdaok and Daanok were short. In terms of the ratio of ears, Daanok had the highest rate of 60.18%, and Jangdaok and Dacheongok had the lowest. There was no significant difference in dry matter content in stover, but P1543 was generally higher in ear and total dry matter content. The dry matter yield was highest in P1543, and the yield of TDN was significantly higher in P1543 and Yanganok. There was a significant difference in the crude protein content of ears and the dry digestibility of stems (p<0.05), while there was no significant difference in the content of each part or element. Combining the above results, Yanganok was the highest in terms of yield, and Dacheongok, Sinhwangok and Pyeonggangok were also recommended for domestically grown corn varieties in the mountainous regions of Gangwon-do.