• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.1
• /
• pp.19-28
• /
• 2000

The parallel inverter is widely utilized because of its fault-tolerance capability, high-current output at constant voltages and system modularity. The conventional paralled inverter usually employes an active and reactive power control or a frequency and voltage droop control. However, these approaches have the disadvantages that the response time of parallel inverter control is slow against load and system parameter variation to calculate active, reactive power, frequency and voltage. This paper describes novel control scheme for equalization of output power between the parallel connected inverters. The proposed scheme has a fast power balance control response, a simplicity of implementation, and inherent peak current limiting capability since it employes a instantaneous current/voltage control with output voltage and current balance and output voltage regulation. A design procedure for the proposed parallel inverter controller is presented. Futhermore, the proposed constrol scheme is verified through the simulation in various cases such as the system parameter variation, the control parameter variation and the nonlinear load condition.

• Interdisciplinary Bio Central
• /
• v.3 no.2
• /
• pp.7.1-7.6
• /
• 2011

Background: Published manuscripts are the main source of biological knowledge. Since the manual examination is almost impossible due to the huge volume of literature data (approximately 19 million abstracts in PubMed), intelligent text mining systems are of great utility for knowledge discovery. However, most of current text mining tools have limited applicability because of i) providing abstract-based search rather than sentence-based search, ii) improper use or lack of ontology terms, iii) the design to be used for specific subjects, or iv) slow response time that hampers web services and real time applications. Results: We introduce an advanced text mining system called PubMine that supports intelligent knowledge discovery based on diverse bio-ontologies. PubMine improves query accuracy and flexibility with advanced search capabilities of fuzzy search, wildcard search, proximity search, range search, and the Boolean combinations. Furthermore, PubMine allows users to extract multi-dimensional relationships between genes, diseases, and chemical compounds by using OLAP (On-Line Analytical Processing) techniques. The HUGO gene symbols and the MeSH ontology for diseases, chemical compounds, and anatomy have been included in the current version of PubMine, which is freely available at http://pubmine.kobic.re.kr. Conclusions: PubMine is a unique bio-text mining system that provides flexible searches and analysis of biological entity relationships. We believe that PubMine would serve as a key bioinformatics utility due to its rapid response to enable web services for community and to the flexibility to accommodate general ontology.

• Journal of Korea Multimedia Society
• /
• v.13 no.1
• /
• pp.30-37
• /
• 2010

Many embedded real - lime systems have adopted processors supported with dynamic voltage scal-ing(DVS) recently. Power is one of the important metrics for Optimization in the design and operation of embedded real-time systems. We can save considerable energy by using slowdown of processor sup-ported with DVS. In this paper, we improved the previous algorithm at a point of view of time complexity to calculate task slowdown factors for an efficient energy consumption in embedded real-time systems with task synchronization. We grasped the properties of the previous algorithm having $O(n^{2})$ time complexity through mathematical analysis and s simulation. Using its properties we proposed the improved algorithms with O(nlogn) and O(n) time complexity which have the same performance as the previous algorithm has.

• Journal of Korean Academy of Nursing
• /
• v.43 no.2
• /
• pp.145-153
• /
• 2013

Purpose: The purpose of this manuscript is to discuss the need for use of evidence based practice (EBP) in LTC, the current use of evidence in long term care facilities and what we know about adoption of the use of EBP in LTC. Methods: Literature review and reporting of findings from the M-TRAIN study that was a quasi-experimental design to test the effectiveness of an intervention to increase the use of EBPs for urinary incontinence and pain in 48 LTC facilities. Results: Barriers to adopting EBPs include lack of available time, lack of access to current research literature, limited critical appraisal skills, excessive literature to review, non-receptive organizational culture, limited resources, and limited decision-making authority of staff to implement change. Strategies to promote adoption of EBP include the commitment of management; the culture of the home; leadership; staff knowledge, time, and reward; and facility size, complexity, the extent that members are involved outside the facility, NH chain membership, and high level of private pay residents. Findings from the M-TRAIN add, stability of nurse leader and congruency between the leaders perception of their leadership and the staff's perception of the leadership. Conclusion: There is clear evidence of the need and the benefits to residents of LTC and to the health care system yet adoption of EBP continues to be slow and sporadic. There is also evidence for the process of establishing best evidence and many resources to find the available EBPs. The urgent need now is finding ways to best get the EBPs implemented in LTC. There is growing evidence about best methods to do this but continued research is needed. Clearly, residents in LTC deserve the best care possible and EBPs represent an important vehicle by which to do this.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.30 no.7
• /
• pp.81-89
• /
• 2002

Guidance laws can be conceptually classified into three categories although their mathematical representations are various and different. In this paper, a generalized conceptual guidance law including the concepts of the above categories is proposed. The aim angle is introduced using the geometry of the collision triangle. The aim angle represents the arbitrary angle between the pursuit angle and the expected collision angle. The objective of the proposed guidance law is to make the aim angle zero asymptotically. It can be shown that the aim angle error response for the considered system is same as that of the first order system. When the autopilot of the missile system has slow dynamics, autopilot time lag may deteriorate the performance of the guidance law performance. In this case, another new guidance law compensating the autopilot time lag effect is proposed. To verify the proposed guidance laws, several numerical simulations are performed.

• Korean journal of food and cookery science
• /
• v.25 no.1
• /
• pp.45-54
• /
• 2009

Contamination levels of aerobic colony counts, coliforms and pathogenic bacteria were tested in fried rice dishes to monitor quality for risk management. The prevalence of Bacillus cereus in dishes from 8 Chinese-style restaurants and 2 institutional foodservices was 10%, and the bacteria's contamination levels was 3.47 log CFU/g. Echerichia coli, Staphylococcus aureus, and Salmonella were not detected in any of the 10 samples. However, for their aerobic colony counts and numbers of isolated coliforms, the samples were 30% and 70% over the microbial criteria, respectively, for ready-to-eat foods presented in the Korean Food Code. This suggests that fried rice dishes, although cooked with oil at high temperature, require special care. For the prediction of the growth curve of B. cereus spp. in the fried rice samples, an experiment design of 3 storage temperatures ($7^{\circ}C$, $35^{\circ}C$, $57^{\circ}C$) x 5 storage times (0 h, 2 h, 4 h, 6 h, 24 h) was applied. The sample exposed to $35^{\circ}C$ showed no B. cereus spp. at 0 h; however, there was a tendency of slow growth (1.0 log CFU/g) after 4 hours of storage and then faster growth at 6 h (3.7 log CFU/g) and 12 h (4.7 log CFU/g), showing a growth rate of 0.56 log CFU/g/hr. These results indicate that fried rice, despite being heat-treated, can become heavily contaminated with B. cereus spp. when held over 2 hours at room temperature. However, the samples stored at $7^{\circ}C$ and $57^{\circ}C$ over 24 hours were not contaminated with B. cereus. Based on these results, management guidelines for controlling B. cereus are suggested.

• Fire Science and Engineering
• /
• v.26 no.3
• /
• pp.40-48
• /
• 2012

Fire patterns have been used to determine the origin and cause of fires in every setting imaginable. However, it is very difficult to identify fire patterns and causes from the fire-damaged remains of a devastated structure. If someone was killed by the fire, it is possible to identify fire patterns by analyzing the Hb-CO concentration in charred bodies of deceased as well as the pace of the fire. For example, a low level of Hb-CO concentration in the charred bodies indicate a rapid fire with accelerants and the death was caused by severe heat and thick toxic fumes. However, a high level of Hb-CO concentration in the charred bodies demonstrates that the fire was slow and/or there was a flameless form of combustion. Thus, it is possible to identify fire patterns through analyzing the level of Hb-CO concentration on the dead from the fire. In this study, the Hb-CO concentration in the charred bodies was from 3 % at the case of gas burning oneself to death to 93 % at the death caused by smoldering fire.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.34 no.2
• /
• pp.49-59
• /
• 1992

In our researches we made mix-design, with the mixing ratio and pre-cracked ratio of steel fibrous different from each other, building the steel fibrous concrete beam which had pre-cracks. To obtain the fracture characteristics of steel fibrous reinforced concrete, series of experiment were conducted on pre-cracked beam subjected to 3-point bending. Thus, we carried out experiments on the destructive characteristics of its pre-crack and post-crack and the result is as follows. 1. The compressive strength of steel fibrous concrete beam increased more slightly than plane beam, and the tensile strength increased 37%, 59%, 94% and 121% respectively when the amount of fibrous was 0.5%, 0.1% 1.5%, and 1.75% respectively. 2. As the amount of steel fibrous mixing increased ant the steel fibrous inhibited the crack growth, the crack condition of steel fibrous concrete beam was retarded irregularly, and this increased fracture load. 3. The defiance of destruction was reduced in the ratio of 1.35 times and 1.22 times respectively when the length of pre-crack was each 2cm and 4cm in comparison with the case of being without the length, and was similar to that of plane beam when the amount of steel fibrous mixing was below 1.0%, and increased linearly when it as above 1.0%. 4. The experimental formula seeking fracture energy was follows and thus we found that the value of fracture energy depended upon tensile strength and the size of speciment. $G_f=K\;{\cdot}\;f_f^'{\cdot}$da/Ec 5. We observed that in the load-strain curve of steel fibrous concrete beam the progress of the crack became slow, compared with plane beam because the crack condition became long to the extent of about 10 times. Concrete was faultiest brittleness fracture through the study, it was known ductile.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.22 no.2
• /
• pp.146-155
• /
• 2012

The filtered-x LMS(FX-LMS) algorithm has been applied to the active noise control(ANC) system in an acoustic duct. This algorithm is designed based on the FIR(finite impulse response) filter, but it has a slow convergence problem because of a large number of zero coefficients. In order to improve the convergence performance, the step size of the LMS algorithm was modified from fixed to variable. However, this algorithm is still not suitable for the ANC system of a short acoustic duct since the reference signal is affected by the backward acoustic wave propagated from a secondary source. Therefore, the recursive filtered-u LMS algorithm(FU-LMS) based on infinite impulse response(IIR) is developed by considering the backward acoustic propagation. This algorithm, unfortunately, generally has a stability problem. The stability problem was improved by using an error smoothing filter. In this paper, the recursive LMS algorithm with variable step size and smoothing error filter is designed. This recursive LMS algorithm, called FU-VSSLMS algorithm, uses an IIR filter. With fast convergence and good stability, this algorithm is suitable for the ANC system in a short acoustic duct such as the intake system of an automotive. This algorithm is applied to the ANC system of a short acoustic duct. The disturbance signals used as primary noise source are a sinusoidal signal embedded in white noise and the chirp signal of which the instantaneous frequency is variable. Test results demonstrate that the FU-VSSLMS algorithm has superior convergence performance to the FX-LMS algorithm and FX-LMS algorithm. It is successfully applied to the ANC system in a short duct.

• Journal of KIISE:Information Networking
• /
• v.32 no.3
• /
• pp.359-369
• /
• 2005

Delay estimation is a difficult Problem in computer networks. Accurate one-way delay estimation is crucial because it serves a very important role in network performance and thus application design. RTT(Round Trip Time) is often used as an approximation of the delay, but because it is a sum of the forward and reverse delays, the actual one-way delay cannot be estimated accurately from RTT. To estimate one-way delay accurately, this paper proposes a new scheme that analytically derives one-way delay, forward and reverse delay respectively. We show that the performance of TCP can improve dramatically in asymmetric networks using our scheme. A key contribution of this paper is that our one-way deiay estimation is much more accurate than RTT estimation so that TCP can quickly find the network capacity in the slow start phase. Since RTT is the sum of the forward and reverse delays, our scheme can be applied to any protocol that is based on RTT.