• ETRI Journal
• /
• v.37 no.5
• /
• pp.929-939
• /
• 2015

Ultra-high-frequency radio-frequency identification (UHF RFID) is widely applied in different industries. The Frame Slotted ALOHA in EPC C1G2 suffers severe collisions that limit the efficiency of tag recognition. An efficient full-duplex anti-collision scheme is proposed to reduce the rate of collision by coordinating the transmitting process of CDMA UWB uplink and UHF downlink. The relevant mathematical models are built to analyze the performance of the proposed scheme. Through simulation, some important findings are gained. The maximum number of identified tags in one slot is g/e (g is the number of PN codes and e is Euler's constant) when the number of tags is equal to mg (m is the number of slots). Unlike the Frame Slotted ALOHA, even if the frame size is small and the number of tags is large, there aren't too many collisions if the number of PN codes is large enough. Our approach with 7-bit Gold codes, 15-bit Gold codes, or 31-bit Gold codes operates 1.4 times, 1.7 times, or 3 times faster than the CDMA Slotted ALOHA, respectively, and 14.5 times, 16.2 times, or 18.5 times faster than the EPC C1 G2 system, respectively. More than 2,000 tags can be processed within 300 ms in our approach.

• The Korean Journal of Zoology
• /
• v.36 no.4
• /
• pp.487-495
• /
• 1993

TRH (Thvrotropin-Releasing Hormone) known to regulate the transcription of the TSH (Thyroid-Stimulating Hormones gene in pituitary cells, but little is understood about the mechanism(sl involved. re present study was attempted to elucidate the role of Ca2+ movement through the voltage-gated channels in the regulation of TSH gene transcription. The c-fos is one of immediate early genes and used as model system for the investigation of signaling pathwavs involved in various stimuli. The changes of c-fos mRNA levels were determined after treatment of various agents using Northern and slot hybridization analysis. The c-fos mRNA was rapidly and transiently induced by TRH (about 3-fold) in GH3 cells and this induction was repressed by calcium chelating agent (EGTA), calcium channel blocker (verapamil) anti protein kinase C inhibitor (aminoacridine). The abilities of forskolin (adenvlate cvclase activators, PMA (protein kinase C activator), and A23187 (calcium ionophore) to affect c-ios gene transcription, either alone or in combination with TRH were tested in the same cells. All of them significantly increased the level of c-fos mRUA. However, no additive relationship was observed in all combined treatments except forskolin. These results suggest that TRH action on the c-fos gene activation is mediated by calcium influx as well as through protein kinase C.

• ETRI Journal
• /
• v.31 no.2
• /
• pp.111-120
• /
• 2009

Network-on-chip (NoC) architecture provides a highper-formance communication infrastructure for system-on-chip designs. Circuit-switched networks guarantee transmission latency and throughput; hence, they are suitable for NoC architecture with real-time traffic. In this paper, we propose an efficient integrated scheme which automatically maps application tasks onto NoC tiles, establishes communication circuits, and allocates a proper bandwidth for each circuit. Simulation results show that the average waiting times of packets in a switch in $6{\times}6$6, $8{\times}8$, and $10{\times}10$ mesh NoC networks are 0.59, 0.62, and 0.61, respectively. The latency of circuits is significantly decreased. Furthermore, the buffer of a switch in NoC only needs to accommodate the data of one time slot. The cost of the switch in the circuit-switched network can be reduced using our scheme. Our design provides an effective solution for a critical step in NoC design.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.8 no.5
• /
• pp.285-293
• /
• 2013

The procedure of the arbitration which is the tag collision is essential because the multiple tags response simultaneously in the same frequency to the request of the Reader. This procedure is known as Anti-collision and it is a key technology in the RFID system. In this paper, we propose the Bit Pattern Prediction Algorithm(BPPA) for the efficient identification of the multiple tags. The BPPA is based on the tree algorithm using the time slot and identify the tag quickly and efficiently using accurate bit pattern prediction method. Through mathematical performance analysis, We proved that the BPPA is an O(n) algorithm by analyzing the worst-case time complexity and the BPPA's performance is improved compared to existing algorithms. Through MATLAB simulation experiments, we verified that the BPPA require the average 1.2 times query per one tag identification and the BPPA ensure stable performance regardless of the number of the tags.

• Journal of the Korean Society for Precision Engineering
• /
• v.33 no.8
• /
• pp.669-681
• /
• 2016

Mechanical designers often make mistakes that result in unwanted over-constraints, causing difficulty in assembly operations and residual stress due to interference among parts. This study is concerned with detection and elimination of over-constraints. Screw theory is a general method that is used for constraint analysis of an assembly and motion analysis of a mechanism. Mechanical assemblies with plane-plane, pin-hole, and pin-slot constraint pairs are analyzed using screw theory to illustrate its utility. As a real-world problem, a ball valve design is analyzed using the same method, and several unwanted over-constraints are detected. Elimination measures are proposed. Nominal dimensions of some parts are adjusted, and dimensions and tolerances of the pins and holes are modified using the virtual condition boundary concept. The revised design is free of over-constraints. General procedure for applying screw theory to constraint analysis is established and demonstrated; it will contribute to improving quality of assembly designs.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.1A
• /
• pp.18-26
• /
• 2009

Various relay technologies have been considered in wireless communication systems to enlarge the coverage and to enhance the system throughput. However, the coverage is limited by its modulation levels and additional time slot(s) is required for relaying. In the paper, by applying the hierarchical modulation to two-relay systems, two-hop relaying can be implemented instead of three hops, and both throughput and coverage can be enhanced. Throughout simulation analysis, the coverage extension is evaluated for different modulation levels and the total throughput is increased by up to two times.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.10
• /
• pp.1930-1935
• /
• 2009

This paper deals with the torque ripple reduction of permanent magnet synchronous motor using harmonic current injection. Torque ripple of electric motor reduces system stability and performances, therefore efforts to reduce torque ripple are exerted in the design process. Torque ripple can be reduced by appropriate pole/slot combination, skew of rotor or stator, design of magnetic circuit, etc. In addition, torque ripple can be also reduced by input voltage and current, and many researches have been conducted to reduce torque ripple for six-step drive. Torque ripple reduction for current vector controlled permanent magnet synchronous motor also have been conducted and verified by investigating back emf wave form. Torque ripple reduction in this paper started from getting torque profile according to input current and electrical angle calculated by FEA, then instantaneous currents at each electrical angles for constant torque are calculated and applied to experiments. Therefore, 0% of torque ripple can be obtained theoretically with harmonic current injection. In order to maximize the effect of torque ripple reduction, a BLDC motor having high harmonic component of back emf is chosen. With sinusoidal current drive, over 100% of torque ripple is obtained initially, then 0.5 % of torque ripple is obtained by FEA using harmonic current injection. The effect is verified by experiment and the presented method can be effectively applicable to Electric Power Steering(EPS).

• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2008.05a
• /
• pp.50-53
• /
• 2008

Recently as the efficiency of meal area in the neighborhood facilities has decreased, the user is not satisfied about the existing meal area quality. There are problems due to crucial administration due to ineffective use of the meal area and the in-charge. So, a new meal system is coming up with one meal form at one place with time wise classification to satisfy the users and owner. In this plan, the meal area at basement 1 of Korea Advertisement Culture Hall is not just the existing meal area but in day it is a restaurant, at night a vacant hall and in the weekend it is a banquet hall. Such a premium meal area designed by developing the meal area that has different usage as per time slot is named as "M-KITCHEN" and we intend to plan in such a way. The complete "M-KITCHEN"consists largely of entrance/ exit, food distribution area, eating area, specialized restaurant, rest area, kitchen, warehouse etc. This area consists again of multimedia street entrance "M-street", food distribution area "M-kitchen", meal area "M-place", "M-plaza", "Wall pond", "Layer deck", specialized restaurant "M-china", "M-shushi", rest area "Gardening".

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.3 no.1
• /
• pp.155-162
• /
• 1999

In this paper, an R_ALOHA_CDMA protocol is proposed for voice and data integrated services in the hybrid TDMA/CDMA wireless networks. In the hybrid TDMA/CDMA systems, the backward logical channels are composed of time slots with multiple spreading codes per slot. In the proposed protocol, a voice terminal can reserve a spreading code to transmit voice packets during a talkspurt. On the other hand, whenever a data terminal generates a packet, it transmits the packet through one of the available spreading codes. Throughout the results, it is shown that the system capacity increases in proportion to the number of spreading codes.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.17 no.7
• /
• pp.696-708
• /
• 1992

In this study, we have several objectives. First, In spite of a fixed bandwidth waste of reservation channel, we maximize the efficiency of transmission channel by the multiple access algorithm that performs channel reservation and data transmission independently, eliminating the frame structure of transmission channel and reserving it by the slot unit . Second, In order to improve the entire system performance, we accommodate the variation of traffic at each earth station more effectively, and accomplish the stable delay characteristics and the equlity of service #or users. For this purpose, we design the satellite channel that consists of reservation channel and transmission channel which are logically separate and operate Independently. We also design a demand assignment multiple access algorithm based on the satellite channel structure.