• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.10a
• /
• pp.157-158
• /
• 2014

In this paper, a design method for a compact CPW-fed slot antenna using SRRs(split-ring resonators) is studied. The structure of the proposed slot antenna is a rectangular slot antenna loaded with SRR conductors inside the slot to reduce the antenna size. Optimal design parameters are obtained by analyzing the effects of the gap between the SRR conductors and slot, and the width of the SRR conductors on the input reflection coefficient characteristic. The optimized compact slot antenna operating at 2.45 GHz band is fabricated on an FR4 substrate with a dimension of 36 mm by 30 mm. The length of the proposed compact slot antenna is reduced by 14.3% compared to that of a conventional rectangular slot antenna. Experiment results show that the antenna has a desired impedance characteristic with a frequency band of 2.4-2.49 GHz for a VSWR < 2.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.6
• /
• pp.1251-1258
• /
• 1997

Generally, it is very important to study selective coupling between cavities of the filter structure using multimode cavity resonator. In this paper, we have manufactured 5-pole bandpass filter(BPF) using dual and triple-mode cavity resonator. To do so, we have derived the formulas for coupling coefficient about coupling between TE-modes from TM/TE-mode's tangential and lognitudinal field intensities each other. To implement the Chebyshev response, the intercabity slot combining dual-mode and triple-mode is designed to couple one H-field of TE-mode parallel to slot plate. In this paper, specially it is derived the formulas for T $E_{11p}$-mode from TE-modes, and determined after obtaining location and size of intercabity slot from the equation. In this ppaer, based on this result, we designed and implmented teh bandpass filter operated at the center frequency of 14.5GHz with a Chebyshev response. For the manufactured cavity filter, dual-mode and triple-mode cavity are resonted by two orthogonal T $E_{113}$-modes, and by two orthogonal T $E_{113}$-modes and one T $M_{012}$-mode, respecitively. The 2-stage 5-pole BPF proposed in this paper has the insertion loss of -2.32dB, the reflection loss of -15dB in the passband, and the out-or-rejection of -67dB.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.61-62
• /
• 2015

In this paper, a design method for a dual-band compact slot antenna using SRR(split-ring resonator) conductor is studied. The SRR conductor is loaded inside of a rectangular slot of the proposed antenna for dual-band operation. Final design parameters are obtained by analyzing the effects of the gap between the SRR conductor and slot, and the width of the SRR conductor on the input reflection coefficient and gain characteristics. A prototype of the proposed dual-band slot antenna operating at 2.45 GHz WLAN band and 3.40-5.35 GHz band is designed on an FR4 substrate with a dimension of 30 mm by 30 mm.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.05a
• /
• pp.51-52
• /
• 2013

In this paper, circularly polarized microstrip for the S-band with a center frequency of 3.5GHz have been studied using the meta-structure of the resonator Designed antenna using CST studio, the meta-structure resonator was etched in the ground plane for miniaturization and circulary polarization was implemented with slot in center of the patch.

• 한국ITS학회:학술대회논문집
• /
• 2010.05a
• /
• pp.96-97
• /
• 2010

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.2
• /
• pp.214-217
• /
• 2013

In this paper, a waveguide-type resonator with a slot is proposed to measure permittivity of thin film from resonant frequency shifting by an attached MUT(Material Under Test). The MUT on the slot shifts resonant frequency by perturbation of electromagnetic field. Amount of shifting resonance frequency is dependent on the permittivity of MUT, and that relation is obtained from numerical simulation. The measured relative permittivity of a thin film with thickness of $65{\mu}m$ is 3.3492 with standard error of ${\pm}0.0605$ in the frequency range of 2 GHz to 3 GHz. Also the proposed method is compared with other measuring methods such as dielectric resonator and waveguide probe systems.

• Journal of information and communication convergence engineering
• /
• v.16 no.3
• /
• pp.197-202
• /
• 2018

This paper reveals the impact of the insertion of electromagnetic band gap (EBG) structures on the performance of circularly polarized (CP) patch-slot antenna with offset slot. Several optimizations are necessary to precise physical parameters in the aim to fix the resonance frequency at 3.2 GHz. The proposed antenna possesses lightweight, simplicity, low cost, and circular polarization ensured by two feeding sources to permit right-hand and left-hand circular polarization process (RHCP and LHCP). The measured results compared with simulation results of the proposed circularly polarized EBG antenna with offset slot show good band operations with –10 dB impedance bandwidths of 9.1% and 36.2% centered at 3.2 GHz, which cover weather radar, surface ship radar, and some communications satellites bands. Our investigation will confirm the simulation and experimental results of the EBG antenna involving new EBG structures.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.2 no.4
• /
• pp.59-64
• /
• 2009

In this paper, we represent characteristics and equivalent circuit of donut type resonator of defected ground structure (DGS), and can control resonant frequency with chip capacitor. In General, DGS operates like with parallel LC resonator. We found out variation of resonance frequency when capacitor is placed on slot of DGS. If the chip capacitor replace with varactor diode, the resonance frequencies can be controlled by voltage. This tualable resonator can apply to voltage controlled oscillator and tunable bandpass filter.

• Journal of Sensor Science and Technology
• /
• v.31 no.5
• /
• pp.353-359
• /
• 2022

This study investigated via computational analysis the application utility of series-cascaded ring resonators based on silicon-on-insulator (SOI) slot optical waveguides in integrated optical biochemical sensors. The radii of the two rings in the series-cascaded ring resonators were 59.4 ㎛ and 77.6 ㎛ respectively, and the coupling distance was 0.5 ㎛. The series-cascaded ring resonators were computationally analyzed using FIMMProp and PICWave numerical software. The free spectral range (FSR), full width at half maximum (FWHM), sensitivity, and quality-factor (Q-factor) of the series-cascaded ring resonators were 12.2 nm, 0.134 nm, 4100 nm/RIU, and 11580, respectively, and the measurement range was calculated to be slightly smaller than 3×10^-3 RIU. Although the measurement range was smaller than that of the single ring resonator, upon considering other characteristic parameters, the series-cascaded ring resonators are found to be more effective as integrated sensors than single ring resonators.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.11
• /
• pp.1025-1033
• /
• 2011

In this paper, we introduce the contactless power transmission device for transmitting the power with the resonant characteristic of the cavity resonator. When transmitting the power, the contactless power transmission device begins to work in the condition where the transceiver adheres closely. The transceiver is electrically separated because there is no conductive terminal outside and the size of the receiver required for the electric power transmission can be minimized. The cavity resonator comprises slots for the input port and output port in the upper side conductor plate of the cavity and forms the input port and output port using the stripline structure at this upper part. The some of output port is separated from it and the electric power receiver is formed thus the union can be possible. The rest except electric power receiver become the electric power transmitter, which includes the input port of stripline-slot coupling, cavity, and the slot of the output port. If the transmitter and the receiver are combined, they become the form in which the electricity is transferred from the input port to the output port in a cavity resonator. The center frequency of the contactless power transmitter manufactured is 5.782 GHz. and $S_{21}$ is measured as -1.07 dB. It is confirmed that the high electric power transfer rate is approximately 78 %.