• 대한전자공학회논문지
• /
• 제19권6호
• /
• pp.80-83
• /
• 1982

X-밴드 주파수에서 λg/4 개방 마이크로스트립 선로 급전형 스로트 점렬을 구현하였다. 최적 급전점은 실험적으로 결정하였고 스로트 점각의 여러 주파수에서 입력 임피던스와 복재 패턴을 측정하였으며 다소 다른 길이의 16개 소자와 본 논문에서 제시한 급전 선로를 사용하여 주파수 대역을 증가시켜 보았다. A quarter-wavelength open circuited microstripline slot array is realized at X-band froquency. The optimal feeding point is experimentally determined. The input impedance of the slot array for various frequencies and its radiation pattern are measured. The bandwidth of the slot array is increased by using the 4×4 elements which are slightly different in length and feeding network which is suggested in this papers.

• 한국정보통신학회논문지
• /
• 제4권1호
• /
• pp.59-65
• /
• 2000

This paper describes the characteristics of a one dimensional narrow-wall slotted waveguide array with a single-layer linear-to-circular polarization converter consisting of a dipole array. An external boundary value Problem of one slot and three dipoles, which approximates the mutual coupling between the dipole array and an edge slot extending over three faces of a rectangular waveguide, is formulated and analyzed by the method of moments; design of polarization conversion is conducted for this model as a unit element. If every unit element has perfect circular polarization, grating lobes appear in the array pattern due to the alternating slot angle: these are suppressed in this paper by changing the dipole angle and degrading the axial ratio of the unit element. The validity of the design is confirmed by the measurements. The dipole array has negligible effects upon slot impedance; the polarization conversion for existing narrow-wall slotted arrays is realized by add-on dipole array.

• ETRI Journal
• /
• 제23권1호
• /
• pp.33-38
• /
• 2001

A numerical simulation and an experimental implementation of T-shaped microstrip-fed printed slot array antenna are presented in this paper. The proposed antenna with relative permittivity 4.3 and thickness 1.0mm is analyzed by the finite-difference time-domain (FDTD) method. The dependence of design parameters on the bandwidth characteristics is investigated. The measured bandwidth of twin-slot array antenna is from 1.37 GHz to 2.388 GHz, which is approximately 53.9 % for return loss less than or equal to -10 dB. The bandwidth of twin-slot is about 1.06 % larger than that of single-slot antenna. The measured results are in good agreement with the FDTD results.

• Journal of electromagnetic engineering and science
• /
• 제18권3호
• /
• pp.154-159
• /
• 2018

In this paper, electromagnetic radiation from a slot array antenna enclosed by a Von Karman radome is analyzed by using the ray tracing method and Huygens's principle. We consider the rectangular slot array antenna and the Von Karman radome. The radiation patterns are calculated by using the surface currents of the radome to illustrate the electromagnetic behaviors of the radome-enclosed waveguide slot array antenna.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2008년도 하계종합학술대회
• /
• pp.231-232
• /
• 2008

The proposed cavity-backed slot antenna is comprised of baffles, reflectors and thick ground plane. The baffles and reflectors are used to increase an antenna gain, thus reducing the coupling among slots on a thick ground plane. The height of the baffle and reflector were altered and the characteristics of corresponding $2{\times}2$ cavity-backed slot array antennas were measured separately. Themeasured antenna gains were above 15dBi, at f=42GHz and a wide impedance bandwidth over 27% at a center frequency of 42GHz.

• 한국전자파학회논문지
• /
• 제15권11호
• /
• pp.1019-1025
• /
• 2004

직각 도파관 내의 주 모드인 TE$_{10}$ 모드의 필드 분포를 기준으로 만든 전송선 등가 모델을 바탕으로 슬롯 결합의 결합을 통해 급전하는 도파관 슬롯 배열 안테나를 설계하였다. 이를 위해 도파관 중심에 위치한 기울어진 슬롯(결합 슬롯)의 적절한 각도와 도파관 축 방향 슬롯(방사 슬롯)의 이격거리를 구해낸 후, 이를 EM 시뮬레이션을 통해 전자기적 특성을 파악하고 특성을 분석하였으며 실제 제작품 측정 결과 비교하였다. 측정된 반사손실 대역폭은 중심주파수 9.15 GHz에서 180 MHz, 부엽레벨은 -25 dB 이하, 반 전력 빔폭은 약 9$^{\circ}$, 이득은 25.5 dB이며 이러한 결과는 시뮬레이션 데이터와 유사하다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 추계종합학술대회 논문집
• /
• pp.147-150
• /
• 1999

A T-shaped microstripline-fed printed slot array antenna having wide bandwidth, high gain, and narrow bandwidth is presented in this paper. The proposed antenna is analyzed by using the transmission line model method. We fabricated 4$\times$1 microstrip slot array antenna and measured its return loss and radiation pattern. The maximum bandwidth of this array antenna is from 1.43 ㎓ to 2.60 ㎓, which is 58.1% for the VSWR $\leq$ 2.

• Journal of electromagnetic engineering and science
• /
• 제17권3호
• /
• pp.133-137
• /
• 2017

In this study, a 28-GHz U-slot array antenna for a wideband communication system is proposed. The U-slot patch antenna structure consists of a patch, two U-shaped slot, and a ground plane. With the additional U-slot, the proposed antenna has around 10% of bandwidth at -10 dB. To increase gain, the U-slot antenna is arrayed to $2{\times}2$. The proposed antenna is designed and fabricated. The $2{\times}2$ array antenna volume is $41.3mm{\times}46mm{\times}0.508mm$. The proposed antenna was measured and compared with the simulation results to prove the reliability of the design. The bandwidth and gain of the measurement results are 3.35 GHz and 13 dBi, respectively and the operating frequency is around 28 GHz.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.211-214
• /
• 2004

Microstrip slot array antenna fed by microstrip line is introduced. Slot antenna is designed to operate at 10 GHz for using in radar systems. Antenna have dielectric constant of the substrate is 2.17 (PTFE). In fact, it is study to analyze slot array antenna including feeding line with wide bandwidth. The characteristics of antenna is proposed and analyzed for instance input impedance, $S_{11}$ parameter and far field radiation patterns which these characteristics can also be calculated efficiently and accurately by using FDTD Method.

• 한국군사과학기술학회지
• /
• 제11권3호
• /
• pp.138-145
• /
• 2008

In this paper, the waveguide slot array antenna which is capable of wide beam steering and dual polarization is designed for an X band synthetic aperture radar. In order to improve the restriction of beam steering range and to remove the butterfly lobes, a typical waveguide slot array antenna has been modified. To implement dual polarization, rod excited waveguide slot elements and ridge waveguide slot elements are alternately arranged. Location of slots, inclination of rod and offset distance of slots are determined on using array characteristic and conductance constant with radiating power on slots. The designed antenna is manufactured and measured with Near-filed measurement method.