• Proceedings of the Korea Information Processing Society Conference
• /
• 2000.10b
• /
• pp.1071-1074
• /
• 2000

본 연구는 멀티미디어 트래픽의 하나인 VBR(Variable Bit Rate) 서비스를 위한 무선 단말기의 효율적인 채널 사용을 위한 무선 ATM MAC(Medium Access Control) 프로토콜에 관한 연구이다. 현재 유선망에서는 멀티미디어 서비스를 위하여 ATM 기술을 사용하고 있기 때문에 유무선망의 통합을 위한 ATM 무선망의 설계가 대두되고 있다. 이를 위해서는 무선망이 가지는 대역폭의 한계와 링크의 높은 에러율을 극복하기 위해서 효율적인 MAC 알고리즘 개발이 필요하다. 본 논문에서는 무선 ATM망에서 VBR 트래픽 소스를 갖는 단말기의 QoS를 보장하고 채널 사용의 효율을 높이기 위하여 신경망을 이용한 Neural DSA(Dynamic Slot Assignment) 알고리즘을 제안하고 시뮬레이션을 통해 기존에 제안된 MAC 알고리즘과 성능 비교 분석을 통해 그 우수성을 확인하였다.

• Proceedings of the KIEE Conference
• /
• 1998.07a
• /
• pp.46-48
• /
• 1998

This paper introduces the design method of a variable reluctace liner pulse motor to be analysed by a 3-dimensional problem in the 2-dimension. And it shows the thrust force density with respect to the ratio of the slot width to the teeth width, the height of mover and the height of tooth.

• ETRI Journal
• /
• v.37 no.5
• /
• pp.888-897
• /
• 2015

Group scheduling is an operation whereby control packets arriving in a time slot schedule their bursts simultaneously. Normally, those bursts that are of the same wavelength are scheduled on the same channel. In cases where the support of full wavelength converters is available, such scheduling can be performed on multiple channels for those bursts that are of an arbitrary wavelength. This paper presents a new algorithm for group scheduling on multiple channels. In our approach, to reach a near-optimal schedule, a maximum-weight clique needs to be determined; thus, we propose an additional algorithm for this purpose. Analysis and simulation results indicate that an optimal schedule is almost attainable, while the complexity of computation and that of implementation are reduced.

• Proceeding of EDISON Challenge
• /
• 2016.03a
• /
• pp.604-609
• /
• 2016

슬롯판을 이용한 경사충격파와 경계층 간섭유동 제어에서, 슬롯판 아래에 있는 공동부의 형상을 바꾸어 가며 제어 성능을 비교하는 수치적 연구가 수행되었다. 공동형상 직사각형 5개, 사다리꼴 3개를 선정하여 shock 뒤에서 경계층 안정성, 전압손실을 기준으로 제어 성능을 평가하였다. 수치해석 결과 모든 형상에 대해 제어하지 않은 상태보다 좋은 성능을 얻었다. 그 중 경계층 안정성 측면에서는 형상 L과 R, 전압손실 감소 측면에서는 형상 M과 A가 효과적임을 확인하였고, 종합적으로 슬롯의 끝 면과 공동의 길이방향 끝 면이 일치하는 형상에서 상대적으로 좋은 결과를 얻음을 확인했다. 또한 슬롯과 공동 내부유동을 분석하면서 경계층 안정성과 전압손실 감소에 영향을 미치는 것은 separation 영역을 얼마 원활히 흡입하는지의 여부임을 알 수 있었고, 상류 슬롯에서 발생하는 shock에 대한 추후 해결 연구도 필요함을 알 수 있었다.

• Proceeding of EDISON Challenge
• /
• 2016.11a
• /
• pp.96-100
• /
• 2016

슬롯판을 이용한 경사충격파와 경계층 간섭유동 제어에서, 슬롯의 각도를 바꾸어 가며 제어 성능을 비교하는 수치적 연구가 수행되었다. 기준이 되는 수직 슬롯, 각도를 달리한 6개의 case를 선정하여 하여 충격파 뒤에서 전압손실 및 경계층 안정성을 기준으로 제어 성능을 평가하였다. 수치해석 결과 모든 형상에 대해 제어하지 않은 상태보다 좋은 성능을 얻었다. 공력성능이 뛰어난 그룹과 그렇지 않은 그룹을 구분하여 슬롯과 공동 유동 구조를 분석하면서 경계층 불안정성을 야기하고 전압손실 감소에 영향을 미치는 것은 경계층과 충격파가 상호작용하는 영역에서 Vortex를 얼마나 제어할 수 있는지 여부임을 알 수 있었고, 이러한 Vortex를 얼마나 제어할 수 있는지에 따라 공력 성능이 결정됨을 파악할 수 있었다.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.11
• /
• pp.1990-1995
• /
• 2010

Main reasons for causing vibration in a permanent magnet synchronous motor (PMSM) are torque ripple and radial force harmonics, and hence, both of them are undesirable in high-precision machine tools and accurate motion-control actuators. Recent research on radial force is the prediction of major vibration frequencies and modes in terms of motor design such as different winding types and a fractional slot number per pole in the stator. Also, proper phase current has been investigated for minimizing radial force harmonics. During the previous studies, all the motors are assumed to be ideally built up in terms of mechanical dimensions, but it is impossible due to dimensional variation within or outside tolerance in production. Therefore, in this paper, the effect of several key factors on radial force is examined and compared regarding manufacturing imperfection.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.132-133
• /
• 2006

Optimized choice of material for two principally different types of PM components is presented. The first is characterized by high stresses in areas with high stress concentrations (for example synchronizer hubs with very sharp notches, typically <0.25mm in the pre-synchronizer slot and the inner splines). The second type has slightly larger notch radii (small spur gears and sprockets with typically notch radii between 1- 3mm). Diffusion alloyed materials are well suited for sharp notch components. Pre-alloyed materials are also well suited for applications with sharp notches if compressive residual stresses in the notch roots are created by appropriate process control. A free choice of material is available for components with the larger notch radii.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.30.3-30
• /
• 2001

In this paper, we designed the 6-wheeled mobile robot (6-WMR) with the passive linkage mechanism which enables 6-WMR to passively adapt to the given stairs. To overcome the limit of adaptability to the terrain of conventional WMR and improve the energy efficiency, we proposed the new WMR using the passive linkage mechanism. The passive linkage mechanism consists of the simple four-bar linkage mechanism which allows 6-WMR to climb stairs with adaptability and an additional link which is connected to the four-bar linkage mechanism by a pin-slot joint to enable 6-WMR to passively go up the stairs. We made a miniature model of the proposed 6-WMR ...

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.17 no.3
• /
• pp.1035-1048
• /
• 2023

The IEEE 802.11 WLAN adopts a random backoff algorithm for its collision avoidance mechanism, and it is well known that the contention-based algorithm may suffer from performance degradation especially in congested networks. In this paper, we design an efficient backoff algorithm that utilizes a reinforcement learning method to determine optimal values of backoffs. The mobile nodes share a common contention window (CW) in our scheme, and using a Q-learning algorithm, they can avoid collisions by finding and implicitly reserving their optimal time slot(s). In addition, we introduce Frame Size Control (FSC) algorithm to minimize the possible degradation of aggregate throughput when the number of nodes exceeds the CW size. Our simulation shows that the proposed backoff algorithm with FSC method outperforms the 802.11 protocol regardless of the traffic conditions, and an analytical modeling proves that our mechanism has a unique operating point that is fair and stable.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.4
• /
• pp.692-700
• /
• 2012

The WiMedia Alliance has specified a Distributed Medium Access Control (D-MAC) protocol based on UWB for high speed wireless home networks and Wireless USB. In this paper, firstly, the fair SoQ-based Distributed Reservation Protocol (DRP) for D-MAC is analyzed. And a novel SoQ-based relay transmission protocol is proposed to overcome DRP conflicts fast. In the proposed protocol, each device executes the Satisfaction of QoS (SoQ) time slot allocation algorithm independently. And, in order to give the loser device due to DRP conflicts another chance to maintain QoS resources, the proposed relay transmission protocol helps the device reserve another indirect link maintaining the required QoS resources via a relay node.