• Structural Engineering and Mechanics
• /
• 제66권3호
• /
• pp.411-421
• /
• 2018

Although a rubber isolation cushion can reduce the dynamic response of a structure itself, it has little influence on the height of a sloshing wave and even may induce magnification action. Vertical baffles are set into a base-isolated Concrete Rectangular Liquid Storage Structure (CRLSS), and baffles are opened as holes to increase the energy dissipation of the damping. Problems of liquid nonlinear motion caused by baffles are described using the Navier-Stokes equation, and the space model of CRLSS is established considering the Fluid-Solid Interaction (FSI) based on the Finite Element Method (FEM). The dynamic response of an isolated CRLSS with various baffles under an earthquake is analyzed, and the results are compared. The results show that when the baffle number is certain, the greater the number of holes in baffles, the worse the damping effects; when a single baffle with holes is set in juxtaposition and double baffles with holes are formed, although some of the dynamic response will slightly increase, the wallboard strain and the height of the sloshing wave evidently decrease. A configuration with fewer holes in the baffles and a greater number of baffles is more helpful to prevent the occurrence of two failure modes: wallboard leakage and excessive sloshing height.

• Structural Engineering and Mechanics
• /
• 제65권5호
• /
• pp.557-572
• /
• 2018

The academic research works about liquid storage tanks are reviewed for the purpose of providing valuable reference to the engineering practice on their aseismic design. A summary of the performance of tanks during past earthquakes is described in this paper. Next, the seismic response of tanks under unidirectional earthquake is reported, supplemented with the dynamic response under multidirectional motions. Then, researches on the influence of soil-structure interaction are brought out to help modify the seismic design approach of tanks in different areas with variable properties of soils. Afterwards, base isolation systems are reported to demonstrate their effectiveness for the earthquake-resistant design of liquid storage tanks. Further, researches about the liquid-structure interaction are reviewed with description of simplified models and numerical analytical methods, some of which consider the elastic effect of tank walls. Moreover, the liquid sloshing phenomenon on the hydrodynamic behaviors of tanks is presented by various algorithms including grid-based and meshfree method. And then the impact of baffles in changing the dynamic characteristics of the liquid-structure system is raised, which shows the energy dissipation by the vortex motion of liquid. In addition, uplifting effect is given to enhance the understanding on the capacity of unanchored tanks and some assessment of their development. At last, the concluding remarks and the aspects of extended research in the field of liquid storage tanks under seismic loads are provided, emphasizing the thermal stress analysis, the replaceable system for base isolation, the liquid-solid interaction and dynamic responses with stochastic excitations.

• 대한조선학회지
• /
• 제27권2호
• /
• pp.21-30
• /
• 1990

자유수면을 갖는 2차원 탱크내 유동현상의 규명을 위하여 수치해석법 및 실험적 방법을 제사하였다. 수치해석 방법으로는 전유동장에 대하여 Lagrangian 표현법 개념의 유한요소법을 적용하였으며, 유도의 비압축성 조건을 이용하여 Navier-Stokes 방정식을 fractional step method로 속도수정하는 방법을 도입하였다. 유한요소 내부의 유체는 항상 그 요소 안에 머물러 있고 유체의 경계는 항상 요소의 경계에 따라 이동하고 벽면에서 미끄러짐이 일어난다고 가정한다. 이 방법은 유동이 심한 경우 유동장의 이산화를 재조정해야 하므로 물체 적합좌표계를 사용한 절점 재조정법을 개발하였다. 실험은 한국해사기술연구소가 보유하고 있는 MTS유압시스템을 이용하여 슬러싱 탱크 모형실험이 수행되었으며, 이를 위하여 슬러싱 전용시험기를 제작하였다. 2차원 단순 직사각형 탱크에 대하여 수심의 변화 및 기진진폭의 변화에 따른 유동현상의 변화를 관찰하였고 이론해석 결과와 비교하였다.

• 한국항공운항학회지
• /
• 제18권4호
• /
• pp.30-37
• /
• 2010

This paper deals with attitude determination and parameter estimation problems for a lunar module. For this we first derive equations of motion for the lunar module by considering allocation locations (configurations) of reaction thruster and a reaction wheel assembly. The lunar module is assumed as a rigid body. In order to include the effect of fuel sloshing on the dynamics of the lunar module, we model it as a spherical pendulum for a simple analysis. For estimating angular rates and moment of inertia of the module, we employ an extended Kalman filter and the least mean square algorithms, respectively. Finally we construct a dynamical model for the lunar module by combining all these elements.

• Wind and Structures
• /
• 제7권4호
• /
• pp.215-234
• /
• 2004

The tuned liquid damper (TLD) is increasingly being used as an economical and effective vibration absorber. It consists of a water tank having the fundamental sloshing fluid frequency tuned to the natural frequency of the structure. In order to perform efficiently, the TLD must possess a certain amount of inherent damping. This can be achieved by placing screens inside the tank. The current study experimentally investigates the behaviour of a TLD equipped with damping screens. A series of shake table tests are conducted in order to assess the effect of the screens on the free surface motion, the base shear forces and the amount of energy dissipated. The variation of these parameters with the level of excitation is also studied. Finally, an amplitude dependent equivalent tuned mass damper (TMD), representing the TLD, is determined based on the experimental results. The dynamic characteristics of this equivalent TMD, in terms of mass, stiffness and damping parameters are determined by energy equivalence. The above parameters are expressed in terms of the base excitation amplitude. The parameters are compared to those obtained using linear small amplitude wave theory. The validity of this nonlinear model is examined in the companion paper.

• 한국산업융합학회 논문집
• /
• 제23권6_1호
• /
• pp.907-915
• /
• 2020

Specification selection, Layout, specifications and combinations of Power Drives, and Ship motions were studied for FGPP(Floating Gas-fired Power Plants), which are still needed in areas such as the Caribbean, Latin America, and Southeast Asia where electricity is not sufficiently supplied. From this study, the optimal equipment layout in ships was derived. In addition, the difference between engine and turbine was verified through LCOE(Levelized Cost of Energy) comparison according to the type and combination of Power Drives. Analysis of Hs(Significant Height of wave) and Tp(spectrum Peak Period of wave) for places where this FGPP will be tested or applied enables design according to wave characteristics in Brazil and Indonesia. Normalized Sloshing Pressures of FGPP and LNG Carrier are verified using a sloshing analysis program, which is CFD(Computational Fluid Dynamics) software developed by ABS(American Bureau of Shipping). Power Transmission System is studied with Double bus with one Circuit Breaker Topology. A nd the CFD analysis allowed us to calculate linear roll damping coefficients for more accurate full load conditions and ballast conditions. Through RAO(Response Amplitude Operator) analysis, we secured data that could minimize the movement of ships according to the direction of waves and ship placement by identifying the characteristics of large movements in the beam sea conditions. The FGPP has been granted an AIP(Approval in Principle) from a classification society, the ABS.

• 한국전기전자재료학회논문지
• /
• 제35권1호
• /
• pp.98-101
• /
• 2022

Liquid-based Triboelectric nanogenerator (L-TENG) is one of the alternatives to solid-based Triboelectric nanogenerator (S-TENG) because of the absence of surface damage which can decrease the durability of the generator. However, the L-TENG also has an obvious drawback of significantly lower output than that of S-TENG. This article produces water-sloshing-based electricity generating device (W-ED) with a new design of L-TENG that improves electrical output in portable form. The dual-electrode system, consisting of closed-loop circuit and inner electrode which enables water to contact directly in the bottle, can generate the open-circuit voltage and the short-circuit current of up to 348 V and 5.1 mA, respectively. By investigating the motion of water for each frequency, we propose that W-ED is suitable device for a variety of human motions. We expect that W-ED can be applied in small electrical devices or sensors in daily-use items.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2022년도 춘계학술대회
• /
• pp.213-213
• /
• 2022

본 논문은 슬로싱(Sloshing) 거동에 놓인 극저온 액체수소 화물창의 BOG 예측을 위한 CFD 해석 절차를 다루고 있다. 특히, 적재율(Filling Ratio)에 따라 달라지는 열 유입과 그에 따른 액체수소의 기화 경향을 파악하기 위한 목적으로 수행되었다. 액체수소와 기체수소의 혼재에 의한 다상 열유동(Multiphase-Thermal flow) 특성을 반영하고 유동에 따른 강제 대류 현상을 열유속에 반영하기 위한 CFD 해석을 수행하였다. 다상 유동 모델의 정확성을 검증하기 위하여 슬로싱 실험의 압력 계측 값과 해석의 압력 값 및 자유수면(Free surface) 형상을 비교하였다. 소형 C-Type 독립형 액화수소 탱크를 대상으로 슬로싱 유동과 BOG 발생을 수치적으로 예측하였다. 해석 과정에서 VOF(Volume of fraction) 모델과 Eulerian 모델을 모두 적용하여, 액체수소에 유입되는 열 유속(Heat flux)의 예측 정확성을 비교하였다. 슬로싱 유무에 따라 액체수소에 유입되는 열 유속을 비교하여 슬로싱 유동의 포함 여부에 따른 BOG 발생량의 변화를 제시하였으며, 최종적으로 액체수소의 충전율(Filling ratio) 별로 BOG 발생량의 경향성을 제시하였다.

• Structural Engineering and Mechanics
• /
• 제89권4호
• /
• pp.421-436
• /
• 2024

This research addresses experimentally the relationship between the excitation frequency and both hoop and axial wall stresses in a water storage tank. A low-density polyethylene tank with six different aspect ratios (water level to tank radius) was tested using a shake table. A laminar box with sand represents a soil site to simulate Soil-Structure Interaction (SSI). Sine excitations with eight frequencies that cover the first free vibration frequency of the tank-water system were applied. Additionally, Ricker wavelet excitations of two different dominant frequencies were considered. The maximum stresses are compared with those using a nonlinear elastic spring-mass model. The results reveal that the coincidence between the excitation frequency and the free-vibration frequency of the soil-tank-water system increases the sloshing intensity and the rigid-like body motion of the system, amplifying the stress development considerably. The relationship between the excitation frequency and wall stresses is nonlinear and depends simultaneously on both sloshing and uplift. In most cases, the maximum stresses using the nonlinear elastic spring-mass model agree with those from the experiments.

• 한국지진공학회논문집
• /
• 제9권2호통권42호
• /
• pp.71-80
• /
• 2005

유체자유수면의 동적거동을 합리적으로 예측하기 위해서는 비선형 특성을 보이는 자유수면의 동역학적 경계조건을 고려해야할 뿐만 아니라 시간에 따라 변화하는 자유수면의 위치변화에 따른 운동학적 경계조건을 고려하여야 한다. 이러한 문제는 대상구조물이 3차원이 될 경우 더욱 복잡해지므로 3차원 비선형 유체자유수면의 해석은 이론해의 도출이 어려우며 수치해석 방법을 이용하는 것이 효과적이다. 본 연구에서는 수치해석 안정성이 높고 3차원 문제에서도 하나의 변수로 유체거동을 모사할 수 있는 arbitrary Lagrangian-Eulerian approach 를 경계요소에 적용하여 효율적이며 안정적인 유체 대변형 해석기법을 개발하였다. 개발된 기법은 향후 자유수면의 비선형 효과를 고려한 유체-구조물 상호작용 해석에 효과적으로 적용할 수 있을 것으로 판단된다.