• Journal of Advanced Marine Engineering and Technology
• /
• 제3권1호
• /
• pp.32-39
• /
• 1979

Alignment of marine engine shafting generally implies a judicious slope alignment of supporting bearings in order to achieve acceptable values of bearing reactions and shaft stresses for all deformation conditions of hull. Authors developed a computer program, which computes the bearing reaction forces, the bearing reaction influence numbers and etc, using quadruple integration method. And the results of calculation for a 26,000 DWT steam container carrier were in good agreements with those of foreign shipyard. Also they introduced the optimization technique of slope alignment combined technical economic basis, and as a result of comparing characteristics of shafting in case of straight alignment whit those in case of slope alignment, the latter was found to be much better than the former.

• 한국지반공학회지:지반
• /
• 제12권1호
• /
• pp.35-46
• /
• 1996

강우시의 사면지반과 억지말뚝의 거동을 관찰하기 위하여 각종 계측기에 의한 현장계측이 실시되었다. 즉, 억지말뚝으로 보강된 아파트 배면절개사면에 경사계, 지하수위계 및 스트레인게이지가 설치되었다. 억지말뚝에 발생된 수평변위와 휨응력은 억지말뚝속에 설치된 경사계와 스트레인게이지로 측정하였으며, 사면지반의 수평변형은 말뚝사이지반에 설치된 경사계로 측정하였다. 지하수위 계측결과 강우시 지하수위는 집중호우에 그다지 민감하지 못하였다. 강우시 지표면으로부터 습윤대가 형성되고 이 습윤대의 강하는 말뚝과 지반의 거동에 많은 영향을 미치고 있었다. 왜냐하면 습윤대의 강하로 인하여 이 습윤대 상부지반의 단위체적중량이 증가하게 되고 또한 사면의 활동력이 증가하게 되기 때문이다. 이러한 집중호우시의 억지말뚝과 사면의 거동은 탄성적이었다.

• Geomechanics and Engineering
• /
• 제18권4호
• /
• pp.353-362
• /
• 2019

Soil-rock mixture (S-RM) is an inhomogeneous geomaterial that is widely encountered in nature. The mechanical and physical properties of S-RM are important factors contributing towards different deformation characteristics and unstable modes of the talus slope. In this paper, the equivalent substitution method was employed for the preparation of S-RM test samples, and large-scale triaxial laboratory tests were conducted to investigate their mechanical parameters by varying the water content and confining pressure. Additionally, a simplified geological model based on the finite element method was established to compare the stability of talus slopes with different strength parameters and in different excavation and support processes. The results showed that the S-RM samples exhibit slight strain softening and strain hardening under low and high water content, respectively. The water content of S-RM also had an effect on decreasing strength parameters, with the decrease in magnitude of the cohesive force and internal friction angle being mainly influenced by the low and high water content, respectively. The stability of talus slope decreased with a decrease in the cohesion force and internal friction angle, thereby creating a new shallow slip surface. Since the excavation of toe of the slope for road construction can easily cause a landslide, anti-slide piles can be used to effectively improve the slope stability, especially for shallow excavations. But the efficacy of anti-slide piles gradually decreases with increasing water content. This paper can act as a reference for the selection of strength parameters of S-RM and provide an analysis of the instability of the talus slope.

• Smart Structures and Systems
• /
• 제24권6호
• /
• pp.793-802
• /
• 2019

The centrifuge model test is usually used for two-dimensional deformation and instability study of the soil slopes. As a typical loose slope, the municipal solid waste (MSW) landfill is easy to slide with large deformation, under high water levels or large earthquakes. A series of centrifuge model tests of landfill slide induced by rising water level and earthquake were carried out. The particle image velocimetry (PIV), laser displacement transducer (LDT) and marker tracer (MT) methods were used to measure the deformation of the landfill under different centrifugal accelerations, water levels and earthquake magnitudes. The PIV method realized the observation of continuous deformation of the landfill model, and its results were consistent with those by LDT, which had higher precision than the MT method. The deformation of the landfill was mainly vertically downward and increased linearly with the rising centrifugal acceleration. When the water level rose, the horizontal deformation of the landfill developed gradually due to the seepage, and a global slide surface formed when the critical water level was reached. The seismic deformation of the landfill was mainly vertical at a low water level, but significant horizontal deformation occurred under a high water level. The results of the tests and analyses verified the applicability of PIV in the two-dimensional deformation measurement in the centrifuge model tests of the MSW landfill, and provide an important basis for revealing the instability mechanism of landfills under extreme hydraulic and seismic conditions.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1995년도 사면안정대책, 조사 및 설계방법, 시공사례
• /
• pp.25-46
• /
• 1995

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1997년도 봄 학술발표회 논문집
• /
• pp.81-88
• /
• 1997

• 한국해안해양공학회:학술대회논문집
• /
• 한국해안해양공학회 2003년도 한국해안해양공학발표논문집
• /
• pp.44-52
• /
• 2003

항만 및 해안의 이용과 개발 그리고 연안해역공간에서 발생하는 각종 재해를 예방하는 측면에서 볼 때 해안에서 형성되는 여러 물리적인 현상들을 정확하게 이해하고 해석하여 필요에 따라 적절히 활용할 수 있는 것이 무엇보다도 중요한 과제이다. (중략)

• 물과 미래
• /
• 제17권3호
• /
• pp.197-209
• /
• 1984

본 연구는 해안제방의 설치에 따른 제방전면의 변형과 제각부의 국소적 지형변동량을 알고자 해운대의 해양조사와 2차원 수리모형실험을 행한 것이며 제방의 설치위치, 해빈경사와 파랑의 특성에 따른 제방제각부의 최대선굴심, 1차경향범위, 최대변동량, 최대변량량까지의 거리 및 2차영향범위의 값들을 구명하여 이들 지형변동량을 줄일 수 있는 해운대해수욕장의 침식대책공법에 이바지 하고자 한다.

• 한국지반공학회논문집
• /
• 제18권6호
• /
• pp.5-16
• /
• 2002

사면 내의 지하수 유동과 사면의 안정성에 대한 강수의 영향을 평가하기 위하여 수리지질역학적 수치 모델이 제시되었다. 이 수치 모델은 변형성 지질매체 내에서의 포화-불포화 지하수 유동을 설명하는 완전 연동된 간극탄성론적 지배 방정식들과 Galerkin 유한요소법에 근거하여 개발되었다. 이렇게 개발된 완전 연동된 수리지질역학적 수치 모델은 다양한 강수량 조건 하에 있는 불포화 사면에 대한 일련의 수치모의실험에 적용되었다. 이러한 수치모의실험 결과들은 강수량이 증가할수록 사면의 전반적인 수리역학적 안정성이 저하되며 잠재적인 파괴가 사면 전단부에서부터 시작되어 사면 정상부 쪽으로 팽창됨을 보여주고 있다. 강수량이 증가함에 따라 수리지질학적으로는 압력수두와 전체 수리수두가 증가한다. 그 결과 지하수면이 상승하고 불포화대가 감소하며 삼출면이 사면 전단부로부터 사면 정상부쪽으로 팽창하고 이러한 삼출면에서의 지하수 유동 속도도 증가하게 된다. 한편 강수량이 증가함에 따라 지질역학적으로는 사면 전단부를 향해 수평 변위는 증가하지만 수직 변위는 감소하게 된다. 이는 강수량 증가에 따른 지하수면의 상승에 수반하는 부력에 기인하는 것으로 해석된다. 그 결과 사면의 전반적인 변형이 사면 전단부를 향해 심화되고 전단파괴 안전율이 1 이하인 불안전한 지역이 사면 전단부에서 두꺼워지면서 사면 전단부에서부터 사면 정상부 쪽으로 팽창하게 된다. 또한 수치모의실험 결과들은 이러한 잠재적인 전단파괴면과 지표면 사이의 지반에서는 잠재적인 인장파괴가 발생할 수 있음을 보여주고 있다.

• Structural Engineering and Mechanics
• /
• 제57권1호
• /
• pp.1-20
• /
• 2016

On the basis of the geological conditions of high and steep mountainous slope on which an exit portal of an express railway tunnel with a bridge-tunnel combination is to be built, the composite structure of the exit portal with a bridge abutment of the bridge-tunnel combination is presented and the stability of the slope on which the express railway portal is to be built is analyzed using three dimensional (3D) numerical simulation in the paper. Comparison of the practicability for the reinforcement of slope with in-situ bored piles and diaphragm walls are performed so as to enhance the stability of the high and steep slope. The safety factor of the slope due to rockmass excavation both inside the exit portal and beneath the bridge abutment of the bridge-tunnel combination has been also derived using strength reduction technique. The obtained results show that post tunnel portal is a preferred structure to fit high and steep slope, and the surrounding rock around the exit portal of the tunnel on the high and steep mountainous slope remains stable when rockmass is excavated both from the inside of the exit portal and underneath the bridge abutment after the slope is reinforced with both bored piles and diaphragm walls. The stability of the high and steep slope is principally dominated by the shear stress state of the rockmass at the toe of the slope; the procedure of excavating rockmass in the foundation pit of the bridge abutment does not obviously affect the slope stability. In-situ bored piles are more effective in controlling the deformation of the abutment foundation pit in comparison with diaphragm walls and are used as a preferred retaining structure to uphold the stability of slope in respect of the lesser time, easier procedure and lower cost in the construction of the exit portal with bridge-tunnel combination on the high and steep mountainous slope. The results obtained from the numerical analysis in the paper can be used to guide the structural design and construction of express railway tunnel portal with bridge-tunnel combination on high and abrupt mountainous slope under similar situations.