• Journal of the Society of Naval Architects of Korea
• /
• v.58 no.2
• /
• pp.97-104
• /
• 2021

Together with the emerging of the Eco-ship, the application of large-diameter and high-efficiency propeller required more careful attention than before in the design of the shafting system. After the adoption of Environmentally Acceptable Lubricants (EAL) to the stern tube lubrication oil, a number of aft stern tube bearing accidents have been reported, and a variety of institutions have actively conducted research on the cause relationship. This study attempted to find the cause of the accident by measuring the alignment of the shafting system of a medium-sized product/chemical tanker with aft stern tube bearing damage and analyzing the reaction force of each bearing. In addition, a reasonable solution to the correction of the shaft alignment was suggested and the feasibility was reviewed. Through various measured data and analysis, the actual installation of shafting system was slightly different from the design drawing condition, but it was found that each bearing load distribution was within the allowable range. Therefore, it was confirmed that the cause of this accident was due to the dissatisfaction the misalignment slope of aft stern tube bearing rather than the effect of the bearing overload. As a solution to this cause, countermeasures such as double slope were suggested in the aft stern tube bearing, and the characteristics of EAL also seem to have an indirect effect.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2005.05a
• /
• pp.255-260
• /
• 2005

A Gravity characteristic of Svalbard archipelago in Arctic was studied by using ArcGP data. There are situated the Dasan science station. After bouguer correction, an edge effect of free-air anomaly, which is similar to topography, are not shown at passive continent margin, and after terrain correction with GTOPO30 data, gravity anomaly increases from continent to marine. that is deep connected with rise of Moho discontinuity. The correlation of topography and free-air anomaly shows that the isostasy of continent attains a little less than marine. After filtering, the residual anomaly are shown high and low anomalies related to fracture zone in continent and base depression or thick sedimentary layer in continental slope, marine.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.24 no.1
• /
• pp.105-115
• /
• 2000

This study was intended to find body pattern of middle aged women and make new experimental basic pattern for upper-half of the body for them. This experimental pattern on the idea of body pattern analysis was prepared. For experimental pattern, the prototype basic model was chosen with the best qualified D model from the four meaningful existing patterns. After several steps of correction experimental pattern was made. Comparing with basic D model, the new experimental pattern composed of additional bust girth by 1cm, wider back waist by 0.5cm than front waist and additional armhole by 0.5cm keeping the same size for back and front widths. Making a shoulder line up by 3cm the armhole became deeper accordingly and the room for girth has been transferred to length. Front neck girth became deeper downward but back neck girth risen a little bit. Side line of the bodice formed with inward slope taking from the waist line by 2cm. Instead of dart, modified side line slope was more practical by its function and appearance. Abdominal girth which is lower than waist girth by 8.5cm kept in same size with bust girth. Then abdominal girth became more comfortable. New experimental pattern with changes has been examined in function and appearance. In conclusion, the new experimental basic pattern for the middle-aged women has been proved more practical for both in bodice and sleeve than other existing ones in terms of function and appearance.

• Journal of KIISE:Computing Practices and Letters
• /
• v.14 no.3
• /
• pp.291-295
• /
• 2008

In this paper, we propose an input image reduction method to solve the problems of Radon transform which is a line structure analysis tool to correct a rotated object through a vision system. First we extract an object image removed background from the input image. Then we also select a reduced object image as a final input mage of Radon transform from the object image by considering slope. Finally we extract a rotated angle by using Radon transform with the final input image and correct the rotated object with the angle. In experimental results, we could improve the process time of about 64%, reduce the memory space of about 18% and make progress the line detection rate of about 18%.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.15 no.2
• /
• pp.287-298
• /
• 1997

The main object of this study was to prove the effectiveness of satellite image data for extraction of the Matsucoccus Thenbergianae Miller ビt Park damaged area. The effectiveness of extraction of damaged area was improved by using the BRCT(Backwards radiance correction transformation) with DEM for normalization of topographic effects. The surface analysis of the extracted damaged area was revealed that the damage was started at south-west slope with the aspect of 7 to 18 degrees, and 50% to 70% of the highest altitude mountains. The direction of damage attached by the Matsucoccus Thunbergianae Miller et Park was able to predict through the analysis of periodical of years' images

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.4 no.4
• /
• pp.231-235
• /
• 2011

In these day, the number of people who have an abnormal posture caused by bad habit are increasing. Therefore, people suffer various disease and symptoms. For correcting the posture to cure, we need continuous monitor, expenditure of time and money. In this study, we develop a posture correcting aid system in other to monitor a posture continuously and leads to pose correctly and records postural variation which are attached to the neck and the waist. The devised system showed good potential for the correct posture guide and a cure of postural defect.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.3
• /
• pp.351-361
• /
• 2012

The leading surgical method for correcting the misalignment of the varus and valgus in the knee joint is the high tibial osteotomy (HTO). In the opening wedge HTO (OWHTO), there is no concern about damaging the peroneal nerve on the lateral tibia of the proximal fibula. OWHTO has been the preferred choice, as the opening of the correction angle can be modulated during the operation. The correction of the varus and valgus on the coronal plane are performed adroitly. Nevertheless, there have been numerous reports of unintended changes in the medial tibial plateau and posterior slope angle (PSA). The authors have developed an HTO method using computer-assisted surgery with the aim of addressing the abovementioned problems from an engineer's perspective. CT images of the high tibia were reconstructed three-dimensionally, and a virtual osteotomy was performed on a computer. In addition, this study recommends a surgical method that does not cause changes in the PSA after OWHTO. The results of the study are expected to suggest a clear relationship between the anteromedial cortex oblique angle of each patient and the PSA, and an optimal PSA selection method for individuals.

• Journal of Korean Society of Forest Science
• /
• v.97 no.6
• /
• pp.611-616
• /
• 2008

The investigation was accomplished on the test area in Forest Practice Research Center in order to compare Point Grid method with Bufferring method in process of the calculation of the Actual Mean Skidding Distance with the GIS aided harvesting method. the investigation site amounted to 264.9 ha in area and 32.67 m in the road density, 306.1 m in road spacing. the Net Correction Factor (Kn) was 1.53 in both sides skidding. the theoretical mean skidding distance was 72.52 m. the shortest mean skidding distance amounted to 149.57 m with point grid method and 139.68 m with Buffering methode. skidding distance correction factor (Kr) was 2.15. actual mean skidding distance amounted to 251.51 m and factor of wood assortment skidding (Kg) was 3.29. when the tractor (Dongyang) and tower yader (Koller 303) are used on investigation site, the logging cost is calculated 11,808 Won with Tractor below 25% slope and 12,336 won with Tractor between 25~55% slope, 10,020 won with Tower Yarder more than 55% slope.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.9 no.4
• /
• pp.45-59
• /
• 2006

In this study, the effects of the surface topographical characteristics on the meteorological fields are examined in a mesoscale meteorlolgical model. We calculated the direct solar radiation using the illumination angle considering the inclination of topography and tried to find out its effect on meteorological fields. In above experiments, we selected two cases for the clear day and the cloudy day to show the effect of weather and represented the results for two cases. In the correction of the direct solar radiation, the results of two cases indicate that there are obvious differences on the steep Taeback and Soback mountains. And on the time-series analysis the east-facing slope of these mountains receives the more direct solar radiation about $10-60W/m^2$ in the morning hours but lesser in the afternoon hours than the horizontal surface while it is opposite on the west-facing slope. And the results mentioned above are more obvious at clear day. With the same analysis method, at clear day, the surface skin temperature is higher at all hours than that on horizontal surface on the both of slope. At cloudy and rainy day, the surface skin temperature on the east-facing slope is higher in the morning hours but lower in the afternoon hours than that on horizontal surface. But on the west-facing slope, it is higher at all hours than that on horizontal surface. In the two cases, the temperature considering the slope of surface is almost higher than that on the horizontal surface. The wind is stronger than that on the horizontal surface with increasing pressure gradient force according as increasing temperature gradient around the Taeback and the Soback mountains.

• Korean Journal of Computational Design and Engineering
• /
• v.18 no.6
• /
• pp.385-398
• /
• 2013

Opening wedge high tibial osteotomy (OWHTO) is widely used to treat unicompartmental osteoarthritis of the knee caused by degenerative deformations of the anatomical axes of the leg. However, since it is difficult to accurately plan the surgical degrees of adjustment such as coronal correction angle and tibial posterior slope angle to align the axes before the actual procedure, a number of studies have proposed analytical models to solve this problem. While previous analytical models for OWHTO were limited to specific cases, this study proposes an analytical osteotomy model (AOM) and a surgical planning system (SPS) that are suitable for a wide range of tibial morphologies and tibia conditions. The validity and generality of the model were verified in a total of 60 OWHTO cases. Results of the test showed that, as predicted, surgical degrees are affected quite significantly by tibia shape and slope of the resected surface. Comparison of the required surgical degrees and the degrees estimated from virtual surgery simulations using AOM showed a very small average difference of $0.118^{\circ}$. SPS, based on AOM, allows the operating surgeon to easily calculate surgical parameters needed to treat a patient.