• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.4C
• /
• pp.239-245
• /
• 2006

The steep slopes have been increased of new roads, industrial site development and large scale residential development. The preservation administration and steep slope construction are currently investigated by many researchers in Korea. However, concrete retaining wall or reinforced soil (i.e. Block or Pannel) are being applied for the steep slope, which results in the front face form of the structure being limited. This research investigates the method that can make up afforestation environment-friendly circumstances during the construction of steep slope structure. It is considered that steep slope reinforced structure would be possible based on the monitoring results about earth pressure, horizontal displacement and consolidation quality generated during the construction of whole constructing reinforced structure. Also, there no problems in grassy surface, drainage, and deformation in spite of rainy season after construction period and until now. So that the seeding soil layer surface reinforced soil method could be adopt for steep slope reinforced structure and others.

• Journal of the Korean Society of Safety
• /
• v.37 no.6
• /
• pp.89-95
• /
• 2022

A method for measuring the length and slope of a temporary structure using an unmanned aerial vehicle (UAV) and 3D modeling method is proposed. The actual length and slope of the vertical member of the specimen were measured and compared with the measured values obtained by the proposed method for the specimens with and without the vertical protection net installed. Based on the result of measuring the length of the temporary structure specimen using the UAV and 3D modeling method, the measured value showed an error of 0.87% when compared to the actual length in the specimen without the vertical protection net installed. In addition, the error of the slope was 0.63°. It was thought that the proposed method could be usable for the purpose of finding parts in wrong installation state on the temporary structure and informing the manager in charge. However, in the case of the specimen with the vertical protection net, the measurement showed a 1.46% error in length and 2.77° difference in slope. Therefore, if a vertical protection net is to be installed in a temporary structure, the measurement accuracy should be improved by utilizing an image processing method, etc.

• Korean Journal of Environment and Ecology
• /
• v.8 no.2
• /
• pp.154-159
• /
• 1995

The Chuwang valley-Kumunkwangi valley forest in Chuwangsan area was studied to investigate forest structure in relation to altitude and part of slope. Forty eight quadrats were set up in the valley forest along altitude of 470m to 780m and part of the slope. Density and basal area of trees in tree strata decreased as increasing elevation. With increasing elevation the importance values of Quercus mongolica, Fraxinus rhynchophylla increased, while those of Pinus densiflora, Lindera obtussiloba decreased. As going from lower part to upper part of the slope, the importance values of Quercus valiabilis and Lindera obtussiloba increased while those of Fraxius rhynchophylla, Acer mono decreased. Species diversity tended to decreased as going to upper parts of the slope. The range of similarity indices between elevation belts, and parts of the slope were 74.4~84.2% and 68.0~96.3%, respectively. According to importance value and cluster analysis, the studied valley forest was classified into three forest communities of Pinus densiflora-deciduous tree species community of lower part of slope, Pinus densiflora-Quercus variabilis community of middle and upper part of slope, Pinus densiflora community of the top area.

• Korean Journal of Environment and Ecology
• /
• v.9 no.2
• /
• pp.133-146
• /
• 1996

This study was conducted to analyse plant community structure by the altityed and slope in Tongdaesan area, Odaesan National Park. Sixty-three plots(each plots size was 100m$^{2}$) were set up and PWINSPAN and DCA method were used for vegetational structure analysis. Division of community was cleared altitude than part of slope With increasing elevation the importance values of Quercus mongolica, Tilia amurensis increased, while those of Fraxinus mandshurica, Betula schmidtii, Cornus controversa decreased. Survey plots were divided into 6 groups by the TWINSPAN and DCA method. The divided groups are T. amurensis community(I), Q. mongolica community(II) of upper part of slope of east and west, Q. mongolica-T. amurensis community(III) of middle part of slope, Q. mongolica-F. mandshurica community(IV), Pinus densiflora-B. schmidtii-Carpinus laxiflora community(V) of low elevation of east, F. mandshurica-C. controversa community(VI)of low elevation of west. Also, vegetational change were showed slope of east and west in Tongdaesan except top area for the last twenty yeras.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.16 no.6
• /
• pp.465-471
• /
• 2023

This paper proposes a comparator structure that improves the noise and output delay of a single-slope ADC(SS-ADC) used in CMOS Image Sensor (CIS). To improve the noise and delay characteristics of the output, a comparator structure using the miller effect is designed by inserting a capacitor between the output node of the first stage and the output node of the second stage of the comparator. The proposed comparator structure improves the noise, delay of the output, and layout area by using a small capacitor. The CDS counter used in the single slop ADC is designed using a T-filp flop and bitwise inversion circuit, which improves power consumption and speed. The single-slope ADC also performs dual CDS, which combines analog correlated double sampling (CDS) and digital CDS. By performing dual CDS, image quality is improved by reducing fixed pattern noise (FPN), reset noise, and ADC error. The single-slope ADC with the proposed comparator structure is designed in a 0.18-㎛ CMOS process.

• Economic and Environmental Geology
• /
• v.29 no.5
• /
• pp.615-622
• /
• 1996

Slope stability analysis was conducted using remote sensing and Geoscientific Information System (GIS) as a part of natural hazard assessment around Chungju area. Landsat TM band 5 and 7 which contain more information about geological structure and geography are chosen and processed to analyse regional geological structure. Through image processing technique such as PCA, HFF, edge detection and enhancement, regional lineament can be mapped and identified. The lineament density map is constructed based on summed length of lineaments per unit area and the study area can be divided into 7 structural domains. Various factors of slope stability analysis such as geology, slope aspect, degree of slope, landcover, water shed as well as characterized structural domain are constructed as a database of GIS. Rating and weighting of each factor for slope stability analysis is decided by considering environmental geological characteristics of study area. Spatial analysis of regional slope stability is examined through overlaying technique of the GIS. The result of areal distribution of slope stability shows that the most unstable area is all over Jaeogae-ni, Hyangsan-ni and Mt. Daedun.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.33 no.6 s.113
• /
• pp.127-139
• /
• 2006

Mt. Yokmang landscape design awarded first in [North container terminal site furtherance construction in Busan new port], design competition sponsoring in the Korea Container Terminal Authority in 2005. Design guideline was to propose the symbol of new port and to establish landscape plan in consideration of view and geological location. Because landscape plan required establishment of restoration plan for cutting slope, Mt. Yokmang became the major object. The purpose of planning are as follows. The first purpose is to minimize existent natural environment damage, and the second, to connect with ambit and create new image. The third is to provide place of rest and interchange for local resident. Reflecting stratum structure and landscape characteristics, cutting slope consisted of [utilization slope], [presentation slope], [landscape slope], and [ecological slope]. Vegetation design applied ecological restoration method through restoration of stratum, and eve environment-friendly afforestation, planned program that can connect area with existing ecosystem. In process that decides form of the cutting slope, analyze view structure and visual exposure in various access routes, sensitivity etc. was accomplished. Also, symbolic tower(Ocean Polaris) that presents in architecture and landscaping features, night landscape planning could gain synergy effect by keeping consistence with landscape and ecological planning. Passing through final design and construction process, I expect that the Mt. Yokmang will be a new landmark in Busan new port.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2001.05a
• /
• pp.228-233
• /
• 2001

In this case study, under conideration of field situations, such as increase of water level, height increment of the marine structure, dredging and backfill, the stability analysis of sliding and lateral flow of the marine structure in OOOharbor was carried out, and foundation reinforcement methods was presented. based on the results of site investigation, the stability analysis of slope sliding and lateral flow was performed as following. In section BH-1, 2, the analysis was performed in two cases that the marine structure was heightened and filled, and not heightened and filled. In section BH-1, 4, heightened and filled. The analysis results showed that the stabilities of slope sliding and lateral flow in section BH-1, 2, 3, 4 were unstable. After additional reinforcements with Deep Mortar Pile, the stabilities in section BH-1, 2, 3, 4 were evaluated as efficiently large.

• Proceedings of the Korean Statistical Society Conference
• /
• 2005.05a
• /
• pp.95-100
• /
• 2005

In this paper a class of multifactor designs for estimating the slope of second order response surface regression models with correlated errors is considered. General conditions for second order slope rotatability over all directions and also with respect to the maximum directional variance in case of k=2 have been derived assuming errors have a general correlated error structure. And we consider the measures for evaluating slope rotatability with correlated errors similar to in case of uncorrelated error structures.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.2 no.1
• /
• pp.94-102
• /
• 1999

The retaining wall is a structure which was made for changing land form in many construction. The first role of the retaining wall is to maintain the slope stability. But recently, the amount of retaining wall have been increasing because of the expansion of construction works and the amenity of urban environment have been decreasing because of environmental destruction and the scenic heterogeneity. So we should consider the slope stability and ecological stability at the same time. The purpose of this study is to develop the retaining wall revegetation technology using the Eco-Stone, the structure of co-satisfying which included the slope stability and the revegetation effect. Eco-Stone is a structure which has high stability for earth pressure, settlement and drainage. And cost and term of construction works also have been decreased. Eco-Stone structure is one of factors composing the ecological network which is harmonize with surrounding environment. In this way, it is expected that the ecological habitats of various species would be restored.