• Journal of Biosystems Engineering
• /
• v.24 no.2
• /
• pp.99-106
• /
• 1999

This study was conducted to provide a direction for improving the performance of triangular-type belt clutch. The power transmission characteristics and the wear of belt were investigated for two types of pulley set theoretically and experimentally. The results of research were summarized as follows: 1) Based on the theoretical analysis for the life time of belt, the wear of belt could be reduced by increasing the sizes of driving V-pulley and tension pulley, and by decreasing the tension on V-belt. 2) The pulley set # 2 could transmit more power than the pulley set # 1 could at the same slop rate. While the slip rate was 2.36% on the pulley set # 2 at the maximum power transmission, the slip rate on the pulley set # 1 was increased up to 12.2% at the same condition. 3) From the 16 hours' fatigue test, the wear of belt used n the pulley set # 1 was observed severer than that in the pulley set#2. Also, it was found that the tensile strength of belt used in the pulley set # 2 was greater than that of belt used in the pulley set # 1.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.33 no.8
• /
• pp.826-831
• /
• 2009

The piping systems in nuclear power plant are composed of various typed pipes such as straight, elbow pipe, branch and reducer etc. The elbow is connected from straight pipe to another pipes in order to establish the complicated piping system. Elbow is one of very important components considering management of wall thinning degradation. It is however applied by various loads such as system pressure, earthquake, postulated break loading and many transient loads, which provoke simply the internal pressure, bending and torsional stress. In this study, firstly pipes in the secondary system of the nuclear power plant are classified as pipe size and type for selecting the investigating range. Next, a large number of finite element analysis considering the all typed dimensions of commercial pipe has been performed to find out the behavior of TES(twice elastic slop) plastic load of elbows, which is based on evaluation of the structural safety factor. Finally performance based structural safety factor was investigated comparing with maximum allowable load by construction code.

• Journal of Korean Physical Therapy Science
• /
• v.19 no.1
• /
• pp.63-69
• /
• 2012

Background : The purpose of this study was to investigate the frequency domain characteristics of ground reaction forces during quiet standing on inclined surfaces twenty healthy individuals(10 elderly women $68.78{\pm}3.29$ years and 10 young women $20.90{\pm}0.74$ years) participated. Methods : Subjects stood in quiet stance over a force platform positioned in one of three different fixed positions: flat, down and up. Healthy participants completed with eyes open for 120 s trials. Evaluation of postural control were generally based on the interpretation of center of pressure(COP) time series. The COP have been determined using an experimental setup with 3D kinematic and the ground reaction force system. All the data were expressed means and standard deviation by using SAS package program. Results : SEF 50% were not significant in AP and ML direction according to surface slope of both groups. SEF 95% were showed highest frequency in AP direction on down slope of both groups. MEF were not significant all direction according to surface slopes of elderly women. There was no difference between young and elderly women. Conclusion : Elderly women used to ankle strategy during a quiet stance according to COP perturbation of AP direction showed more expanded than ML direction. SEF 95% were showed highest frequency on down slope in elderly women who showed more used ankle strategy for postural control on down slope.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2004.05b
• /
• pp.1167-1172
• /
• 2004

Recently, runoff characteristics of urban area are changing because of the increase of impervious area by rapid increasing of population and industrialization, urbanization. It needs to extract the accurate topological and hydrological parameters of watersheds in order to manage water resource efficiently. In this paper, rainfall-runoff analysis in An-Yang stream basin was made using GIS(Geographic Information System) and XP-SWMM(Export Stormwater and Wastewater Management Model). The basin was divided into 13 sub-basins using GIS. The area, slope, width of each subcatchment and length, slop of each stream reach were acquired from topographic maps, and imperviousness rate, land use types, infiltration capacities of each subcatchment from land use maps and soil maps using GIS. We gave th runoff management method of urbanization area us ing XP-SWMM.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.11A
• /
• pp.1864-1871
• /
• 2001

In this paper, new symbol timing recovery algorithm is proposed, which is suitable for the digital communication system with Multi-level PAM signals. In the newly proposed symbol timing recovery algorithm, the timing error function is derived by compensating the several difference values between sampled symbol and neighboring symbol every symbol period with mid samples and decided symbol values. Conventional symbol timing recovery methods did not work well in Multi-level PAM signals, but the newly proposed method can be applied to Multi-level PAM signals as well as QPSK. For the performance analysis, the derived variance of the timing error function and the timing error characteristics of S-curve show that the proposed method has better performance than Gardner method and the modified Gardner method.

• Journal of Powder Materials
• /
• v.26 no.2
• /
• pp.107-111
• /
• 2019

The activation energy to create a phase transformation or for the reaction to move to the next stage in the milling process can be calculated from the slop of the DSC plot, obtained at the various heating rates for mechanically activated Al-Ni alloy systems by using Kissinger's equation. The mechanically activated material has been called "the driven material" as it creates new phases or intermetallic compounds of AlNi in Al-Ni alloy systems. The reaction time for phase transformation by milling can be calculated using the activation energy obtained from the above mentioned method and from the real required energy. The real required energy (activation energy) could be calculated by subtracting the loss energy from the total input energy (calculated input energy from electric motor). The loss energy and real required energy divided by the reaction time are considered the "metabolic energy" and "the effective input energy", respectively. The milling time for phase transformation at other Al-Co alloy systems from the calculated data of Al-Ni systems can be predicted accordingly.

• Journal of the Korean Society for Library and Information Science
• /
• v.56 no.4
• /
• pp.455-472
• /
• 2022

The purpose of this study is to analyze variables affecting the number of circulated books which is one of the indicators representing the library use behavior. For the analysis, 2015-2019 data for public libraries was acquired from the National Library Statistics System. The Latent Growth Model estimating a latent intercept and a latent slop based on the individual library trajectories was applied. The results are as followed; first, the circulation rate tends to be decreased. Second, the most affecting factor on the library circulation decrease was the collection budget. This study suggests increasing a collection budget in order to prevent the library circulation decrease while the library is operating in a daily routine.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.27 no.5
• /
• pp.80-93
• /
• 2000

This study measured the shearing resistance of the roots of the Pinus Koraiensis by the tensile strength gained through their individual tensile test for the Root Reinforcement Model. On the basis of the shearing resistance value calculated through such a process the factor of safety(Fs) was comparatively presented by using the simplified Janbu Method in PCSTABL5M, the slop-analyzing software which had been developed in Purdue University of the U.S.A according to the shape of a slope and the type of soil. The results to have measured a stress and the factor of safety(Fs) by experiment are as follows. 1) The mean root diameter of the Pinus Koraiensis used for this experiment was 2.483mm and the mean tensile stress was calculated as 422.846(kgf/$\textrm{cm}^2$). In the strain ratio of material and the elastic modulus was measured 7.8%, 9,291.92(kgf/$\textrm{cm}^2$). 2) The shearing strength including the resistance of soil and root is expressed as Rt=C+Cr+$\sigma$.tan . ΔCr(kg/$\textrm{cm}^2$) of the shearing resistance calculated by estimating the areal ratio of roots at 10 is 0.253(kgf/$\textrm{cm}^2$). 3) As the result of making an analysis of the natural slope stability by the soil parameter, the factor of safety(Fs) was calculated at 1.795 in CL, and the stability analysis of the root reinforcement slope, Fs was calculated at 1.952. However, since a precise analysis of the controlled factors of the slope analyses are demanded for more accurate dynamic analyses, the future demands a study on this.

• Journal of the Korea Safety Management & Science
• /
• v.18 no.1
• /
• pp.9-15
• /
• 2016

In this study, the current regulations to be adequate in industrial site have to be renew in order to prevent the fatal injuries by mobile cranes. Fatal injury analyses were conducted with several accident cases by the mobile cranes. For each accident, the causes of the injuries were examined and proper safety measures were proposed. This study proposed a revision of the standard guideline as an accident prevention measures through in-depth analysis of fatal accidents. First, fatality rate per 10,000 persons by the mobiles cranes was 0.57 in 2011. Second, the in-depth analysis of the mobile crane accidents showed that the main factors of the accidents were the overturn of mobile crane, the fracture of connection part between mobile crane boom and rope, the breaking of rope and the misunderstanding over the signal between a mobile crane driver and workers around a mobile crane. Third, the order of high defection of connecting parts was bucket bolt, bracket and extension parts. Fourth, since there were several cases of overturn of mobile crane by itself in the in-depth analysis of the mobile crane, the over slop-proof device was proposed as the main alternative in this study. Fifth, the revision of standards of safety factor that shall be more than 10, of connecting parts of mobile crane was proposed.

• Journal of Advanced Marine Engineering and Technology
• /
• v.34 no.1
• /
• pp.183-194
• /
• 2010

A suitability analysis for marine afforestation was carried out on physical items based on slop rate, bottom sediment, light intensity, velocity, and wave at north Geomoon waters in Korea. The data from each physical item were changed to a GSDM (Gridded Spatial Distribution Map) using Kriging interpolation. A GSDM grid includes information, and each grid was given a SI (suitability index) of 3 grades(SI of first suitability was 100, SI of second suitability was 50, and non-suitability had no SI). According to the analysis results of all overlaid GSDM, first suitability had 500 SI, and suitability area was 0.25ha. Second and third suitability had 400~450 SI, and suitability area was 2.36ha, 1.80ha, respectively. Therefore, the results suggest that reefs installed for marine afforestation should be anti-slip types against steep slope, and the target species need to include algae with low compensation light intensity in second and third suitability.