• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.16 no.4
• /
• pp.101-107
• /
• 2002

A novel oxidant generation and ion precipitation cell with slits on parallel plate electrodes was proposed instead of the conventional parallel plate type. An investigation was carried out on the effect of the number and size of slits on ion precipitation and oxidant generation characteristics, evidenced by eliminated space charge limiting action and by elevated electric fields in active interelectrode sparing. Consequently, very high ion precipitation and dense oxidant generation characteristics can be realized by having slits un the electrodes of conventional cells as these slits increase the electric fields and decrease the space charge limiting actions in interelectrode spacing.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.2
• /
• pp.446-455
• /
• 1994

An experimental study is conducted for the turbulent recirculating flow behind a backward-facing step when the oscillating jet is issued sinusoidally through a thin slit at the separation edge. Two key parameters are dealt with in the present experiment, i.e., the amplitude of forcing and the forcing frequency. The Reynolds number based on the step height is varied from 25,000 to 35,000. In order to investigate the effect of local forcing, turbulent structures are scrutinized for both the flow of forcing and the flow of no forcing. The growth of shear layer with a local forcing is larger than that of no forcing. The influence of a local forcing brings forth the decrease of reattachment length and the particular frequency gives a minimum reattachment length. The most effective frequency depends on the non-dimensional frequency, St/sub .theta./, based on the momentum thickness at the separation point. A comparative study leads to the conclusion that the large-scale vortical structure is strongly associated with the forcing frequency and the natural flow instability.

• Journal of the Semiconductor & Display Technology
• /
• v.19 no.3
• /
• pp.30-35
• /
• 2020

A microlens has been fabricated by various methods such as a thermal reflow, hot embossing, diamond milling, etc. However, these methods require a relatively complex process to control the microlens shape. In this work, we report on a simple and cost-effective method to fabricate a cylindrical microlens (CML), which can diffuse light widely. We have employed a slot-die head with the dual plate (a meniscus guide with a protruded μ-tip and a shim with a slit channel) for coating of a narrow stripe using poly(methyl methacrylate) (PMMA). We have shown that the higher the coating gap, the lower the maximum coating speed, which causes an increase in the stripe width and thickness. The coated PMMA stripe has the concave shape. To make it in the shape of a convex microlens, we have applied the thermal reflow method. When the stripe thickness is small, however, its effect is negligible. To increase the stripe thickness, we have increased the number of repeated coating. With this scheme, we have fabricated the CML with the width of 223 ㎛ and the thickness of 7.3 ㎛. Finally, we have demonstrated experimentally that the CML can diffuse light widely, a feature demanded for light extraction efficiency of organic light-emitting diodes (OLEDs) and suppression of moiré patterns in displays.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.15 no.9
• /
• pp.822-829
• /
• 2002

This paper deals with the distribution characteristics of the current density and axial magnetic flux density for each slits made on the contact electrode in the vacuum interrupter with axial magnetic field type using 3-dimension finite element analysis. It has been known that the presence of an axial magnetic field parallel to the current flow in the arc plasma can increase the high current breaking capacity of vacuum interrupter by carrying out the arc plasma from constricted mode to diffusion mode. The axial magnetic field is created of itself by current flow in the segments of coil electrode behind the contact electrode. The analyzed results show that if the slits are made in the contact electrode, they can increase the current density and axial magnetic flux density in the contact electrode surface and at the gap distance, which is due to decrease the effect of eddy currents flowing in the contact electrode. The phase shift due to eddy currents, defined 3s time difference between the maximum value of current and axial magnetic field, is decreased still more by increasing the number of slits made in the contact electrode at the center point of gap distance. These results demonstrate that 3-dimension finite element analysis has a great deal of merits in the development and evaluation of new electrode at the design of vacuum interrupter.

• Membrane Journal
• /
• v.32 no.1
• /
• pp.1-12
• /
• 2022

Graphene oxide (GO) has been considered as a promising membrane material, because of its easy processability and distinct properties, including controllable pore size distribution and diffusion channels. Particularly, the feasibility has been proposed a number of simulation results and proof-of-concept experimental approaches towards GO membranes. That is, GO already shows many outstanding intrinsic properties suitable for promising membrane platforms, such as the minimum membrane thickness and the ability to generate nanopores in the two-dimensional lattices or to create slit-like nanochannels between adjacent sheets. This review will be addressed the important experimental development in GO-based membranes for gas and ion separations, emphasizing on intrinsic transport phenomena, and critical issues for practical applications.

• Parasites, Hosts and Diseases
• /
• v.55 no.1
• /
• pp.1-7
• /
• 2017

Cutaneous leishmaniasis (CL) caused by Leishmania donovani is an endemic vector-borne disease in Sri Lanka. Over 2,500 cases have been reported since 2000 and the number of CL cases has dramatically increased annually. Total 57 clinically suspected CL patients attending the dermatology clinic in Anuradhapura Teaching Hospital were recruited from January to June 2015. Slit skin smears and skin biopsies were taken from each of the subjects. Clinical and epidemiological data were obtained using interviewer administered questionnaire. Forty-three (75.4%) patients among 57 were confirmed positive for L. donovani. The majority (77%) of infected patients was males, and the most affected age group was 21-40 years. Soldiers in security forces, farmers, and housewives were identified as high risk groups. The presence of scrub jungles around the residence or places of occupation (P=0.003), the presence of sandflies (P=0.021), and working outsides more than 6 hr per day (P=0.001) were significantly associated with CL. The number of lesions ranged from 1-3, and the majority (76%) of the patients had a single lesion. Upper and lower extremities were the prominent places of lesions, while the wet type of lesions were more prevalent in females (P=0.022). A nodular-ulcerative type lesion was common in both sexes. The presence of sandflies, scrub jungles, and outdoor activities contributed to spread of Leishmania parasites in an endemic pattern. Implementation of vector control programs together with health education with regard to transmission and prevention of CL are necessary to control the spread of this infection.

• Tribology and Lubricants
• /
• v.23 no.5
• /
• pp.219-227
• /
• 2007

The dynamic performance of air foil bearings relies on a coupling between a thin air film and an elastic foil structure. A number of successful analytical techniques to predict dynamic performance have been developed. However, the evaluation of its dynamic characteristic is still not enough because of the mechanical complexity of the foil structure and strong nonlinear behavior of friction force. This work presents a nonlinear transient analysis method to predict dynamic performance of foil bearings. In this method, time dependent Reynolds equation is used to calculate pressure distribution and a finite element method is used to model the bump foil structure. The analysis is treated with a direct implicit integration technique that can handle nonlinear problems and the stick-slip algorithm is used to consider friction force. Using this method the response to the mass unbalance excitation is investigated for various design parameters and operating conditions. The results of analysis show that foil bearing is very effective on the restriction of vibration at the resonance frequency compared to the rigid surface bearings and the effectiveness depends on the operating conditions, static load and a amount of mass unbalance. In addition, there exist optimum values of friction coefficient, bump foil stiffness and number of circumferential slit with regards to minimizing dynamic response at the resonance frequency. These optimum values are system dependent.

• Journal of Korean Society of Steel Construction
• /
• v.20 no.1
• /
• pp.105-119
• /
• 2008

In steel deck bridges suffering directly on wheel load according to the number of serviced years, the occurrence of fatigue cracks increases in structural details, which includes the cross section parts of the longitudinal rib and transversal rib, and so on. Through the control method for these fatigue cracks the increased thickness of the steel deck plate or the application of retrofit detail to the inside of the longitudinal rib was observed to be effective. This study suggests structural details for the retrofitted and non-retrofitted longitudinal rib. The target details in this study are the connection parts of the lo ngitudinal and transversal rib, and the slit parts of transverse rib where fatigue cracks were frequently reported in previous studies. In the analyses, detailed structural analyses were performed as parameters, which include the shape, change of size and attached position. From the results the stress reduction in the target details was observed to be larger in the retroffited details. Also, the improvement of fatigue strength is more effective in the retrofitted details with the vertical rib than the bulkhead plate.

• Korean Journal of Optics and Photonics
• /
• v.14 no.6
• /
• pp.606-612
• /
• 2003

The self-imaging effect or lensless imaging effect of a phase line grating is theoretically analyzed by using Fresnel diffraction theory, then experimentally investigated. The self-imaging distance $z_{T,p}$, that is the imaging distance being perfectly copied from the phase distribution of the phase grating to its intensity distribution with the magnification of 1X, can be uniquely defined as the (4n-3) $z_{T,a}$/4(n=positive integers), where rte is the well-known self-imaging distance of an amplitude grating. When the coherent laser beam is illuminated at the phase grating, the self-imaged images were obtained at $z_{T,p}$= $z_{T,a}$/4 and $z_{T,p}$=5 $z_{T,a}$/4 without any optics. On the other side, the phase-reversed self-imaging was obviously observed at $z_{T,p}$ = 3 $z_{T,a}$/4. The visibility of self-imaged images of a phase line grating as a function of the number of slits of the input grating was measured by the FFT(Fast Fourier Transform) results of the self-imaging images. As a result a stationary maximum visibility of V = 0.10 can be obtained from a grating with more than 15 slit pairs.n 15 slit pairs.

• Applied Microscopy
• /
• v.21 no.2
• /
• pp.76-95
• /
• 1991

A single injection of cadmium chloride (3.75 mg/kg) was made into the peritoneal cavities of albino rats. The cortices of kidney were obtained from the experimental animals at 3 hr., 6 hr., 12 hr., 24 hr. and 36 hr. after administration of cadmium chloride, respectively. The specimens of each experimental animal were prefixed in 2% glutaraldehyde-4% paraformaldehyde solution for $2{\sim}4$ hours, and these specimens were post-fixed in 1% osmic acid. After fixation, the specimens were dehydrated with alcohol and acetate and embedded in Epon 812. Ultrathin sections, $600{\sim}800{\AA}$ thickness were made and stained with uranyl acetate and lead citrate. And all the preparations were observed with Hitachi-600 transmission electron microscope. The results obtained were as follows: 1. The main changes in ultrastructures of the glomeruli observed at 3 hr. after cadmium chloride administration include loss of filtration slit and fenestrae of capillary endothelium that was resulted from thickings of the basal lamina and fusion of pedicels of the podocytes. At 12 hr. after cadmium chloride administration the Bowman's capsules were mostly filled with abnormally thickened and fused pedicels. After 24 hr. however, the only recognized change was loss of fenestrae of the capillary endothelium. And the ultrastructure of the glomeruli were almost normal in 36 hr. after cadmium chloride treatment. 2. At 3 hr. after treatment with cadmium chloride, in the renal tubular cells the vesicles and vacuoles increased in number at the apical portion, of the tubular epithelial cells, the basal infoldings were reduced and the basal lamina was thickened. After 12 hr., a number of phagosomes appeared at the apical portion and the cisternae of rough endoplasmic reticulum were swollen. At 24 hr. after cadmium chloride administration irregularly shaped mitochondria were observed in the apical area, and mitochondria with swollen cristae were found at the basal portion. And after 36 hr. The ultrastructures of the epithelial cells appeared almost normal except for a moderate increase in the number of vesicles and vacuoles. Consequently it is suggested that in albino rats, cadmium chloride induces acute reversible degenerative changes in the glomeruli as well as in the epithelial cells of the proximal convoluted tubules.