• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2010년 춘계학술발표회 논문집
• /
• pp.183-185
• /
• 2010

There are many error sources in GPS signal propagation because the signals do not propagate in vacuum. The GPS observations should be preprocessed before they are used for positioning. The cycle slip and outlier detection algorithms are tested in this study in RINEX level using various linear combinations of the observables. The elbourne-Wubbena (M-W) linear combination has an advantage of long wavelength with low noise, and the geometry-free and ionosphere-free linear combinations are used as well to clean the measurements.

• 대한기계학회논문집
• /
• 제17권10호
• /
• pp.2646-2653
• /
• 1993

A rotational torque calibration system is developed to measure rotational torque of power generating systems and to calibrate non-contact rotational torque measurement systems. The maximum capacity of the developed system is 4.5 N-m. It is composed of a DC motor, a DC generator, a control system, a master torque cell, a slip ling/brush set, supporters, a bed etc. The control system is characterized by the closed-loop control with differential intergrator. Rotational torque measurement test and unit response test are conducted to estimate the accuracy of the developed system. It is found that system maintain high consistency and accuracy with the maximum error of 0.25%, Therefore the developed system can be used to measure the rotational torque of power generating systems and to calibrate non-contact rotational torque measurement systems.

• 한국철도학회논문집
• /
• 제10권1호
• /
• pp.51-56
• /
• 2007

In this paper, control schemes are developed for a propulsion system(Converter/Inverter) in electrical train. A robust controller for PWM converter is proposed. The converter controller consists of a PI controller for DC output voltage and a current controller using error-space approach for maintaining the sinusoidal current waveform and unity power factor. This proposed method is based on characteristic ratio assignment(CRA) method which has the advantage to design the optimal gain to meet the referenced response and overshoot within the limit range. Inverter system is controlled by vector control and slip frequency control. At low speed region, vector control scheme is applied to control instantaneous torque and slip frequency control is performed under overmodulation region and one pulse mode. Because output voltage of converter contains harmonics ripple at twice input ac line frequency, control scheme is developed to reduce the pulsating torque current. The performance of propulsion system will be verified by simulation and prototype experimental results.

• 한국항행학회논문지
• /
• 제14권5호
• /
• pp.632-639
• /
• 2010

사용자들이 위치 정보를 가장 많이 요구하는 분야가 바로 육상교통 분야이다. 특히 보다 정확한 위치 정보를 제공함으로써 지능형 도로 교통 관리가 가능하고, 일반 사용자에게도 편리를 가져다준다. 무선 통신망의 발달로 언제 어디서나 주변 기준국의 GPS 정보를 수신할 수 있기 때문에 차량에서도 정밀 측위가 가능하다. 일반적으로 정밀 측위를 위해서는 코드, 반송파 측정치를 사용한다. 하지만 수신기에서는 코드, 반송파 측정치 뿐 아니라 도플러 측정치도 제공하고 있고 도플러 측정치는 속도에 대한 측정치이다. 속도는 육상교통 환경에서 요구되는 중요한 정보이기 때문에 본 논문에서는 도플러 측정치까지 추가하여 육상교통 환경에 적합한 정밀 측위 기법을 연구하였다. 정밀 측위 기법으로는 RTK(Real-Time Kinematic) 기법을 사용하였고, 여기에 측정치로 이중 차분된 도플러 측정치를 추가하였다. 그 결과 도심지역에서 발생하는 다중 경로 또는 반송파의 사이를 슬립(Cyde Slip)에 의한 위치 오차가 완화되었다. 하지만 여전히 발생하는 위치 오차를 완화시키기 위해서 도플러 측정치를 이용한 위치 영역에서의 스무딩 기법을 적용하였다.

• 한국융합학회논문지
• /
• 제11권5호
• /
• pp.27-34
• /
• 2020

오늘날 모바일 교통카드의 활용은 갈수록 증가하고 있다. 모바일 교통카드 충전 방법 중 대부분이 신용카드 충전 방법을 이용한다. 기존의 신용카드 충전 시스템은 카드사마다 프로세스가 다르며 매입 과정에서 시스템적인 오류가 발생했을 때, 이를 자동으로 처리하는 기능이 없어 사람이 수동적으로 오류를 해결해야 하는 문제점이 있다. 본 논문에서는 이러한 부분을 개선하고자, 공통 프로세스를 정의하고 메타데이터로 정의한 테이블을 생성하여 매입 내용들을 정제하여 정보를 제공하는 시스템을 제안한다. 제안 시스템을 통하여 충전 과정에서 오류가 발생하였을 때 개발 공수를 줄이고 충전 시스템의 프로세스 개발 연구에 도움이 될 것으로 기대한다.

• 산업공학
• /
• 제15권4호
• /
• pp.432-438
• /
• 2002

When the trailing edge and leading edge of an airfoil contour of high pressure compressor blades are measured, there exists a measurement error due to the size of the probe stylus ball diameter. In the paper an experimental study is provided to determine the optimum diameter of the probe stylus in inspecting the airfoil of the high pressure compressor blade. The measurement and analysis procedure suggested in this paper will be helpful to those who are involved in measuring and inspecting various types of blades.

• Journal of Biosystems Engineering
• /
• 제15권2호
• /
• pp.79-87
• /
• 1990

An automatic guidance system based upon two position-measurement systems was designed to record where the tractor traveled and to guide the tractor along the predetermined path. An algorithm, using the kinematic behavior of tractor movement, was developed to determine the steering angle to reduce lateral position error. The algorithm was based upon constant travel speed, constant steering rate, and zero slip angles of the tractor wheels. The algorithm was evaluated through use of computer simulation and verified in field experiments. Results showed that the distance interval between position measurements was an important factor in guidance system performance. The position-measurement error of the guidance system must be less than 5 cm to be acceptably precise for field operations. An algorithm based upon a variable steering rate might improve the stability of the guidance system. More accurate measurement of tractor position and yaw angle, and faster error processing are required to improve the field performance of the guidance system.

• 대한기계학회논문집A
• /
• 제27권10호
• /
• pp.1720-1727
• /
• 2003

The object of this work is to develop the measurement method of the transmission error of the helical gears. For this purpose, experimental set up is designed by 3D CAD software. It consists of the motor, inverter, powdered brake equipment, torque sensor and helical gearbox. In this study, tangential linear accelerometers were used as the methods for the transmission error measurement. the acceleration signals are transmitted to the signal conditioners through the slip rings and the transmission errors are obtained by a specially designed circuit board. The transmission errors are analyzed in the frequency domain. As a result, The periodicity of the transmission error is confirmed in the mesh frequency and its harmonics. The magnitude of harmonic components is very dependent on the natural frequencies of the gear system. It usually increases with the rotational speed. However, it does not always increase with torque.

• Nuclear Engineering and Technology
• /
• 제51권3호
• /
• pp.709-718
• /
• 2019

The international nuclear industry has undergone a lot of changes since the Fukushima, Chernobyl and TMI nuclear power plant accidents. However, there are still large and small component deficiencies at nuclear power plants in the world. There are many causes of electrical equipment defects. There are also factors that cause component failures due to human errors. This paper analyzed the root causes of failure and types of human error in 300 cases of electrical component failures. We analyzed the operating experience of electrical components by methods of root causes in K-HPES (Korean-version of Human Performance Enhancement System) and by methods of human error types in HuRAM+ (Human error-Related event root cause Analysis Method Plus). As a result of analysis, the most electrical component failures appeared as circuit breakers and emergency generators. The major causes of failure showed deterioration and contact failure of electrical components by human error of operations management. The causes of direct failure were due to aged components. Types of human error affecting the causes of electrical equipment failure are as follows. The human error type group I showed that errors of commission (EOC) were 97%, the human error type group II showed that slip/lapse errors were 74%, and the human error type group III showed that latent errors were 95%. This paper is meaningful in that we have approached the causes of electrical equipment failures from a comprehensive human error perspective and found a countermeasure against the root cause. This study will help human performance enhancement in nuclear power plants. However, this paper has done a lot of research on improving human performance in the maintenance field rather than in the design and construction stages. In the future, continuous research on types of human error and prevention measures in the design and construction sector will be required.

• 대한인간공학회지
• /
• 제30권1호
• /
• pp.19-28
• /
• 2011

Objective: The aim of this study is to reclassify human errors and to develop hands-on tools to apply the new classification for preventing human error accidents in highway construction site. Background: The main cause of accidents in highway construction was reported as the carelessness of workers. However, such diagnosis could not help us operationally prevent accidents in real workplace. Method: The accidents in highway construction were reanalyzed and the causes of human error were reclassified in order to educate and improve the awareness of human error in highway construction. Field survey and interview with safety managers and workers were conducted to find the causal relationship between the actual accidents and the human errors. Results: The most frequently observed human errors in highway construction were classified into six categories such as mis-perception, distraction, memory fail, slip, cognition error and mis-judgment. In order to provide hands-on tools to increase the awareness of human error in construction field, the human error checklist and card sorting diary were developed. Especially, the card sorting diary was designed to increase the ability in human error inspection of safety manager at construction site. Moreover, posters were developed based on actual accident cases. Conclusion: We suggested that the improved awareness and analytical report on checklist, card sorting diary and posters for construction field could collectively prevent the accident. Application: The classification of human error, hands-on tools and posters can be directly applicable on highway construction site. This analytical and collective approach preventing human error-related accident could be extended to other construction workplaces.