• 항공우주기술
• /
• 제11권2호
• /
• pp.65-72
• /
• 2012

프로펠러와 고양력장치를 장착한 터보프롭 항공기에 대한 실속 특성 분석을 위해 수치 해석을 수행하였다. 항공기의 실속 특성은 프로펠러와 고양력 장치의 장착 조합에 따른 형상별 전산해석 결과를 통해 정성적으로 분석하였다. 실속 특성 해석은 Spalart-Allmaras 난류 모델을 기반으로 한 3차원 Navier-Stokes 방정식 해법을 이용하였으며 프로펠러의 회전은 슬라이딩 격자기법을 이용하여 모사하였다. 분석 결과 순항 형상의 경우 동체/날개 페어링에서 주요 유동박리가 발생하며 프로펠러 후류로 인해 점차 감소함을 알 수 있었다. 고양력장치를 장착한 경우 나셀 바깥쪽에서 주요 유동박리 현상이 발생하였고 프로펠러가 회전하는 경우에도 상대속도 감소와 유효 받음각 증가로 나셀 바깥쪽 날개 부분은 조기에 실속에 잠김을 알 수 있었다. 프로펠러는 날개의 inboard에서 하강하는 회전 방향이 프로펠러 후류로 인한 실속 지연 측면에서 유리함을 알 수 있었다.

• Journal of Trauma and Injury
• /
• 제26권1호
• /
• pp.14-17
• /
• 2013

Purpose: The open abdomen is now the standard of care in various clinical situations, especially it is used to treat abdominal compartment syndrome. Many techniques have been reported for closure after an open abdomen, but most take a long time for complete definitive closure and are associated with various problems. We describe a technique using biologic mesh that can achieve early definitive closure after an open abdomen. Methods: A 45-year-old man presented to the emergency room with a painful hip and painful lower extremities after a fall from 80 feet. Radiologic examination revealed multiple fractures of the pelvis and low extremities. Abdominal compartment syndrome caused by a retroperitoneal hematoma developed during the orthopedic surgery. We performed exploration immediately and closed abdomen temporarily. A peritoneal graft of porcine dermal collagen with anterior myofascial approximation of the rectus abdominis muscles and sliding skin flap was performed three days after the previous surgery. Results: There were no complications related to the wound. The patient was transferred to the Department of Orthopedic Surgery seven days after the initial surgery. Conclusion: Early definitive closure using porcine dermal collagen is a feasible method that can reduce the length of hospitalization and the number of operations for an open abdomen.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제5권3호
• /
• pp.333-347
• /
• 2013

The present study numerically models the interaction between a regular wave and the roll motion of a rectangular floating structure. In order to simulate two-dimensional incompressible viscous two-phase flow in a numerical wave tank with the rectangular floating structure, the present study used the volume of fluid method based on the finite volume method. The sliding mesh technique is adopted to handle the motion of the rectangular floating structure induced by fluid-structure interaction. The effect of the wave period on the flow, roll motion and forces acting on the structure is examined by considering three different wave periods. The time variations of the wave height and the roll motion of the rectangular structure are in good agreement with experimental results for all wave periods. The present response amplitude operator is in good agreement with experimental results with the linear potential theory. The present numerical results effectively represent the entire process of vortex generation and evolution described by the experimental results. The longer wave period showed a different mechanism of the vortex evolution near each bottom corner of the structure compared to cases of shorter wave periods. In addition, the x-directional and z-directional forces acting on the structure are analyzed.

• 대한조선학회논문집
• /
• 제56권4호
• /
• pp.373-382
• /
• 2019

This paper shows numerical results for the estimation of the propulsor efficiency of Pre-Swirl Duct for 176k bulk carrier as well as its design method. Reynolds averaged Navier-Stokes equations have been solved and the k-epsilon model applied for the turbulent closure. The propeller rotating motion is determined using a sliding mesh technique. The design process is divided into each part of Pre-Swirl Duct, duct and Pre-Swirl Stator. The design of duct was performed first because it is located further upstream than Pre-Swirl Stator. The distribution of velocity through the duct was analyzed and applied for the design of Pre-Swirl Stator. The design variables of duct include duct angle, diameter, and chord length. Diameter, chord length, equivalent angle are considered when designing the Pre-Swirl Stator. Furthermore, a variable pitch angle stator is applied for the final model of Pre-Swirl Duct. The largest reduction rate of the delivered power in model scale is 7.6%. Streamlines, axial and tangential velocities under the condition that the Pre-Swirl Duct is installed were reviewed to verify its performance.

• 한국항공우주학회지
• /
• 제50권10호
• /
• pp.677-690
• /
• 2022

Actuator disk method 기반의 유동 해석자를 이용하여 수직 이착륙 복합형 비행체 중 하나인 이중 덕트 팬 항공기에 대한 공력해석을 수행하고 관련 지면 효과를 분석하였다. 회전 격자 기법을 이용한 해석결과와의 비교를 통해, 지면 효과 분석을 위한 해석자의 특성과 정확도를 함께 평가하였다. 지면과의 거리에 따른 공력 성능과 유동장 특성을 분석하였다. 지면과의 거리가 가까울수록 팬 추력은 증가하지만, 덕트, 동체, 날개의 수직력 감소로 인한 총 수직력 및 제자리 비행 효율의 저하를 확인하였다. 동체 하부의 유동장 분석으로부터 팬 후류와 지면 간의 상호작용에 의해 발생하는 지면 와류와 분수 유동을 확인하고, 이들이 비행체 공력 성능에 미치는 영향을 분석하였다. 속도 프로파일 비교/검토를 통해 비행체로부터의 거리와 방향에 따른 기체 주변 아웃워시의 강도와 특성을 분석하였다. 또한 콜렉티브 피치각에 따른 지면 효과의 영향을 확인하였다.