• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.8
• /
• pp.906-912
• /
• 2008

We designed and implemented a 3-dimensional structure internal antenna which has volume less than 1.5 cc for mobile phone to improve efficiency and gain. Multiple bending for the resonance of small internal antenna derives reduction of gain due to cancellation of antenna current. In this study, the current cancelation was reduced by the minimization of antenna bending. And the helix element was applied for the purpose both compensation of short antenna length and action of radiation element. For the verification of this study, a 1.5 cc volume 3D antenna which was fabricated by the press method applied to the dual band mobile phone. Measurement showed that efficiencies and gains under the slide down and up were 27.73 %, 0.29 dBi for the GSM band and 46.84 %, 2.27 dBi for the USPCS band, and had good performance under the small antenna volume. H-plane radiation pattern showed omnidirectional for the both band.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.10a
• /
• pp.758-760
• /
• 2007

Organic field-effect transistors (OFETs) are of interest for use in widely area electronic applications. We fabricated a copper phthalocyanine (CuPc) based field-effect transistor with different metal electrode. So we need the effect of the substituent group attached to the phthalocyanine on the surface potential was investigated by Kelvin probe method with varying temperature of the substrate. We were obtained the positive shift of the surface potential for CuPc thin film. We observed the electron displacement at the interface between Au electrode and CuPc layer and we were confirmed by the surface potential measurement.

• Asian Oncology Nursing
• /
• v.2 no.1
• /
• pp.50-60
• /
• 2002

Breast self-exam is easiest, safe and cost effective to be recommended as an important method for early detection of breast cancer. This experimental research with non-equal control design was to develop the efficacy expectation program for breast self-exam based on Bandura's self-efficacy information source. The study objects selected from two local churches in Busan. Twenty from S church were selected as a study group, twenty from D church as a control group. Efficacy expectation promoting program was based on Bandura's efficacy promoting source and was two hour lecture including slide, video tape, demonstration, pamphlet. After this, there were individual interviews with them and consultations through telephone f or verbal persuasion on the weekly basis between the first week and the fifth week. The effect from the experiment were measured on the first week after education and on the fifth week. Data from control group was collected during the period from Jan 11, 2 001 to Feb 15, 2001 and data from study group was collected during the period from Jan 12, 2001 to Feb 16, 2001. Measurement instrument for this study was developed by the author with the advice of specialist in order to measure self-efficacy and breast self-exam practice. Data analysis was done by using SPSS/10.0 PC program $with^2-$ test. t-test and ANCOVA. Proved results for hypothesis were as follows. 1) It was supported that "Study group educated by efficacy expectation promoting program has higher score in change rat e of self-efficacy than control group." (1 week after education F=18.395, p=.000 5 weeks after education F=28.972, p=.000) 2) It was supported that "Study group educated by efficacy expectation promoting program has higher score in change rate of exam practice than control group." (1 week after education F=37.984, p=.000 5 weeks after education F=28.972, p=.000) In conclusion, efficacy expectation promoting program for breast self-exam developed by this study may increase s elf-efficacy and breast self-exam practice.

• The Journal of Korean Physical Therapy
• /
• v.23 no.2
• /
• pp.45-52
• /
• 2011

Purpose: The purpose of this study was to investigate the effect of electroacupuncture on NeuN expression in ventral horn motor neurons of spinal cord, changes in pain thresholdchanges in motor function in rats with partially dissected sciatic nerves. Method: A total of 120 male Sprague-Dawley rats were randomly divided into two groups, a control group and a group administered electroacupuncture at ST36, LI11 and SP9 with 120 Hz and 0.5 mA. Animals were sacrificed on days 1, 3, 7, 14 and 28 after nerve injury (the sciatic nerve was partially dissected). The pain threshold was recorded by an Analgesia? meter and a BBB? score was calculated for motor function. After preparing lumbar spinal cord slide sections, they were immunostained with NeuN antisera (1:2,500). Results: The numbers of NeuN immunoreactive neuronsin the electroacupuncture group was increased compared to the control group. The numbers of NeuN immunoreactive neurons on days 14 and 28 day were different (p<0.05), as were the numbers on days 3 and 7 (p<0.01). The pain threshold BBB score for the electroacupuncture group was higher than for controls. Conclusion: The increase in pain threshold, BBB-score and number of NeuN immunoreactive neurons inventral horn motor neurons of spinal cord in rats withnerve dissection showed that electroacupuncture can attenuate pain transduction and increase motor function. Also, NeuN was a good marker for identifying the degree of nerve cell loss after nervous system injury.

• The Journal of the Korean Society for Microbiology
• /
• v.19 no.1
• /
• pp.65-71
• /
• 1984

The author attempted serological typing with the slide agglutination and the production of heat-labile enterotoxin (LT) and heat-stable enterotoxin (ST) by the enterotoxingenic eschenchia coli 446 strains isolated from diarrheal patients. The enterotoxingenic E.coli, producing LT and/or St, were detected by use of assays in the reversed passive hemagglutination(RPHA) and the suckling mouse method. The results obstained were as follows: 1. Of 446 strains isolated, 88 strains(19.73%) produced LT, while 224 strains(50.22%) produced ST, 134(30.05%) produced both LT-ST simultaneously. Serological typing were typed into 06, 08, 020, 025, 027, 0126, 0148 and 0159. Serotype 06 had the highest incidence of 26.46% followed by 0148(18.16%), 027(14.57%); 025(10.99%), 0159(4.03%), 0126(3.59%), 020(1.12%) and 08(0.45%). 2. Serotype 06, 08 and 025 almost always produced both LT and ST, whereas serotypes 020, 027 and 0148 almost always produced only ST. And serotypes 06, 025, 0126 and 0159 almost always produced LT or ST. 3. Of 134 LT-ST positive strains, 115 strains were serotype 06, 3 strains were 025, 2 strains were 08, and 14 strains were 0 untypable. 4. Of 224 ST positive strains, 65 strains were serotype 027, 81 strains were 0148, 16 strains were 0159, and 42 strains were 0 untypable. 5. Of 88 LT positive strains, 45 strains were serotype 025, 5 strains were 0126, 2 strains were 0159, and 42 strains were 0 untypable.

• The Korean Journal of Mycology
• /
• v.6 no.1
• /
• pp.21-27
• /
• 1978

The growing behavior of Candida albicans in various concentration of glucose and corticosteroid media was studied with the method of modified hanging slide culture. The strains of Candida albicans used in this study were obtained from vaginal swab from outpatients and were isolated from cultured colonies on Sabouraud's glucose agar media. To detect the budding rate of blastospore, the diluted suspension of Candida albicans in normal saline were inoculated into various concentration of glucose (Gl, G2, G3, G4), corticosteroid (S1, S2, S3, S4) and corticosteroid with 10% pepton broth (D1, D2, D3, D4) respectively and cultured at room temperature $(22{\sim}25^{\circ}C)$. The number of budding of blastospore were counted under the high power field of light microscope (400X) at specific time interval, e.g, 1, 2, 3, 6, 9, 12, 18, and 24 hours after inoculation. The results are as following: 1. The most effective budding rate was seen in G4 media (1.25% glucose) in 18 hours aft inoculation (89%). 2. The budding rate in Sabouraud's glucose broth with various concentration of dexamethasone added, was not significantly different from that of simple Sabouraud's glucose broth within 18 hours after inoculation, but there was statistically. significant difference in two budding rate at 24 hours observation. 3. The budding rate in 10% pepton broth media with various concentration of dexamethasone was almost same budding rate in control group, which is normal saline and 10% pepton broth, except on 2 and 24 hours results.

• Journal of the Ergonomics Society of Korea
• /
• v.30 no.5
• /
• pp.605-611
• /
• 2011

Objective: The aim of this study was to investigate the influence of seat heights for optimizing the ingress/egress performance in the elderly people. Background: Recently elderly users have been increasing in number and the ease of ingress/egress of the vehicle becomes an important issue. Method: Seven elderly subjects participated in this study(age: 71.7${\pm}$3.6yr, height: 167.7${\pm}$5.4cm, weight: 68.1${\pm}$11.5kg). Each subject performed the sitting and rising task from comfortable seated position on the chair under the following conditions: (1) with a lumbar support and (2) without a lumbar support. We measured EMG activities of seven muscles(tibialis anterior, soleus, gastrocnemius, vastus lateralis, rectus femoris, biceps femoris and erector supinae) and ranges of motion in lower limb during sitting and standing from three different heights (400mm, 500mm and 600mm from ground) of slide-up seat. Results: Muscle activities and angular movements of hip and knee joints during standing-up and sitting-down with a high seat height(600mm) were reduced mean 30.4% in extensor muscles, 57.11% in flexor muscle, 18.74% in erector muscle and 31.0% in joints compared with a low seat height(400mm). Conclusion: Muscle activities and joint movements in hip and knee were reduced when rising/sitting from a high seat height(600mm) compared with a low seat height(400mm). Application: This study can be used to design vehicle that are easy to get in and out of by older peoples with or without impairments.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.18 no.2
• /
• pp.29-37
• /
• 2019

In this study, emotional adjectives about the operating sound quality of the vehicle power seat are constructed, and the effectiveness of the emotional adjectives are verified by evaluating the operating sound quality. First, emotional adjectives were collected from the literature related to the automobile field and other sound qualities. A questionnaire was made using these adjectives. The questionnaire was designed to be able to select all adjectives that could express the operating noise of the power seat slide adjuster by applying the multiple- response method. Next, a subjective sound quality evaluation was conducted using the emotional adjectives. In the evaluation, we first recorded the operating noise for two power seats. Second, the subjective sound quality evaluation was performed on the recorded operating noise using a loudspeaker. Finally, through a statistical analysis on the sound quality evaluation results, the relationship between the semantic space and the preference score was verified, and the validity of the emotional adjectives was verified.

• Design & Manufacturing
• /
• v.14 no.4
• /
• pp.71-77
• /
• 2020

Various manufacturing technologies, including over-molding and insert-injection molding, are used to produce hybrid plastics and metals. However, there are disadvantages to these technologies, as they require several steps in manufacturing and are limited to what can be reasonably achieved within the complexities of part geometry. This study aims to determine a practical approach for producing metal/plastic hybrid components by combining plastic injection molding and metal die casting to create a new hybrid metal/plastic molding process. The integrated metal/plastic hybrid injection molding process developed in this study uses the proven method of multi-component technology as a basis to combine plastic injection molding with metal die casting into one integrated process. In this study, the electrical conductivity and ampacity were verified to qualify the new process for the production of parts used in electronic devices. The electrical conductivity was measured, contacting both sides of the test sample with constant pressure, and the resistivity was measured using a micro ohmmeter. Also, the specific conductivity was subsequently calculated from the resistivity and contact surface of the conductor path. The ampacity defines the maximum amount of current a conductive path can carry before sustaining immediate or progressive deterioration. The manufactured hybrid multi-components were loaded with increasing currents, while the temperature was recorded with an infrared camera. To compare the measured infrared images, an electro-thermal simulation was conducted using commercial CAE software to predict the maximum temperature of the power loaded parts. Overall, during the injection molding process, it was demonstrated that multifunctional parts can be produced for electric and electronic applications.

• Korean Chemical Engineering Research
• /
• v.60 no.1
• /
• pp.62-69
• /
• 2022

Graphene has a large surface area to volume ratio and good mechanical and electrical property and biocompatibility. This study described the electrochemical deposition and reduction of graphene oxide on the surface of indium tin oxide (ITO) glass slide and electrochemical characterization of graphen-modified ITO. Cyclic voltammetry was used for the deposition and reduction of graphene oxide. The surface of graphen-coated ITO was characterized using scanning electron microscopy and energy dispesive X-ray spectroscopy. The electrodes were evaluated by performing cyclic voltammetry and electrochemical impedance spectroscopy. The number of cycles and scan rate greatly influenced on the coverage and the degree of reduction of graphene oxide, thus affecting the electrochemical properties of electrodes. Modification of ITO with graphene generated higher current with lower charge transfer resistance at the electrode-electrolyte interface. Glucose oxidase was immobilized on the graphene-modified ITO and has been found to successfully generate electrons by oxidizing glucose.